REPAIRS TO JOINERY, ROOF TREATMENT, DAY TO DAY MAINTENANCE , PERIODICAL SERVICES TO CERTAIN PERMANENT AND TEMPORARY BUILDINGS, AND INTERNAL ELECTRIFICATION INCLUDING REPLACEMENT OF DB, MCB, LED, MCCB AT ZONE C (2N DET) UNDER AGE(I) NAVY CHENNAI

Amount

Attending minor complaints of plumbing and sanitary fittings including water leakage from taps, WC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nailing , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bottle traps etc to make it functional and stop leaking of any type of plumbing and sanitary items as in day to day maintenance work complete all as directed. Note:- (i) Ser No 2 to 13 Supply only items will be measured and paid separately and fixing rate, screws, nails, plugs and greases are included in the quoted rate. (ii) In case Daily manpower is not arranged as per direction of Engr-in-charge, recovery at double the market rate or double the CA rate whichever is higher will be made:-

Supply only 40mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)

Supply only 600mm long PVC connections 15 mm size with PTMT nuts

Supply only Fancy type CP stop/angular cock 15mm dia

Supply only Fancy type bib cock 15mm dia CP

Supply only Fancy type pillar cock 15mm dia CP

Supply only Fancy type shower 15mm dia CP

Supply only Fancy type 600 mm long towel rail

Supply only Fancy type towel ring CP

Supply only Fancy type SS Soap dish

Supply only 600mm long x 180mm wide Glass shelf

Supply only 300mm Fiber corner shelf

Supply only 15mm dia of CP health faucet and 1mtr long flexible pipe

Attending minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard, drawers and the like door springs, etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functioning to seating over with Each other with tightening of screws/nails, door springs etc, including petty repairs material like screws/nails, plug, grease etc to make it functional as in day to day maintenance work complete all as specified and directed. Note:- (i) Ser No 15 to 25 Supply only items will be measured and paid separately and fixing rate, screws, nails, plugs and greases are included in the quoted rate. (ii) In case Daily manpower is not arranged as per direction of Engr-in-charge, recovery at double the market rate or double the CA rate whichever is higher will be made:-

Supply only 75mm size, Butt hinges, heavy weight, SS,

Supply only 100 mm size, Butt hinges, heavy weight, SS,

Supply only aluminium handles cast type anodised for 100 mm

Supply only aluminium handles cast type anodised for 150 mm

Supply only Stainless steel handles of 450 mm for glass doors

Supply only 150mm long aluminium, anodised barrel tower bolts

Supply only 200mm long aluminium, anodised barrel tower bolts

Supply only 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) complete all as specified and directed

Supply only 150 mm size Hasp and staple, safety type, aluminium anodised

Supply only 150mm long floor door stopper of Aluminum

Supply only 150mm long mortise lock brass type of 4 levers

S&F Stainless Steel pipe 25mm dia curtain Rod for windows, doors Opening etc complete all as specified and as directed.

S&F Stainless steel Curtain Bracket ( L type) for fixing curtain rod complete all as specified and as directed.

Taking down and refixing the same opening of door/ window Shutters including MS/ aluminum grills of any description exc 1 sqm but not exc 2 Sqm Each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

All as per item No 32 above but with out taking down

Taking down and refixing the same opening of window/ ventilator Shutters including MS/ aluminum grills of any description n exc 1 sqm but Each and including easing and adjusting before fixing of door shutter complete all as specified and directed.

All as per item No 30 above but with out taking down

S&F in repair for 75 mm size, Butt hinges, heavy weight, SS, and fixed complete all as specified and directed

S&F in repair for 100 mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed

S&F in repair aluminium handles cast type anodised for 100 mm complete all as specified and directed

S&F in repair aluminium handles cast type anodised for 150 mm complete all as specified and directed

S&F in repair for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed

S&F in repair for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed

S&F in repair for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed

S&F in repairs Door closer hydraulically of (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F in repairs Aluminium XPM alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F 4mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane.

Taking up or down steel tubing 20mm dia bore and connection complete all as specified

Taking up or down steel tubing 25mm dia bore and connection complete all as specified

Taking up or down steel tubing 40mm dia bore and connection complete all as specified

Cutting chases, pinning in , for concealed water tubing on brick walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 20mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 25mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 40mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

S&F of Brass Elbow for 20mm (3/4 X ½) complete all as specified and as directed

S&F of Brass Tee of 20mm dia complete all as specified and as directed

S&F of Brass Tee of 25mm dia complete all as specified and as directed

S&F of Union of 25mm dia complete all as specified and as directed

S&F of Union of 40mm dia complete all as specified and as directed

Taking down rain water pipe and sewage pipe of any size of pattern including all fittings, heads, shoes, bends etc.

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or floors

S&F for 110mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door

S&F for 75mm dia bore PVC (SWR) junction single, (Single 'T') equal or unequal with access door

S&F for 75mm dia bore PVC (SWR) branch piece, single (Single 'Y') equal or unequal with access door

S&F for 75mm dia bore PVC (SWR) bends any radius.

S&F for 110mm dia bore PVC (SWR) bends any radius

S&F for 110mm dia bore PVC (SWR) vent cowl.

S&F for 75mm dia bore PVC (SWR) vent cowl.

M&L for Cleaning and removal of all scale, dirt,mud and any foreign material and removing accumulated silt etc from RCC/PVC tank and from mouth for circulating pipes of any dia etc. repairs to minor cracks stopping leaking of inlet/outlet pipe by tightening of joints and alike and making joints leak proof of capacity of tank exceeding 250 Litres and not exceeding 1000 Litres all as specified including marking with white paints up to height of G+8 stories and directed by Engineer in charge. Note: Marking of Date of cleaning and Due Date with stencil with white paint

Removing plants/herbs grown on walls/junctions with roots using herbicide chemicals and of existing brick and concrete in high raised building at any storeyed and making good the disturbed surfaces as per existing complete all as specified and directed.

M&L for Clearing the blockage in the water closets of any type completly preferably by manually means to enable the flush water to flow freely to the manholes,all as specified and directed by Engineer-in-Charge

M&L for clearing the blockage of WHB, bottle trap, urinal, sink etc by manually/mechanically and removing blockage from entire system and making it fully functiona all as specified and directed by Engineer-in-Charge.

S&F in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified.

S&F in repair for low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection all as directed.

S&F in repair for Wash basins counter type, vitreous china of 550x400mm, including cutting for and pinning in ends of brackets or erecting stand inclusive of 32mm waste coupling and 1mtr waste pipe all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed. .

S&F in repair for Fancy type CP stop/angular cock (concealed type)15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn of capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed .

S&F in repair for Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, long/ short bodys screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed

S&F for in repair pillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe fixed all as specified and as directed.

S&F in repair for 125 mm dia Fancy type brass CP shower rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed .

S&F in repair for tubular towel rail, brass CP 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed.

S&F in repair for stainless steel sink 1mm thick made of stainless steel for kitchen or laboratory with plugs, washers and wastes; including 40mm waste coupling , bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 600mm x 450mm bowl size 510mm x 330mm x 230mm

S&F for 32 mm PVC waste hose Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. Cm for WHB / SS Sinks with coupling of length 0.90 mtr etc complete all as specified.

S&F in repairs for 32/40 mm dia chromimun plated waste coupling fixed in WHB/Sink complete all as specified and directed

S & F 1000 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position .

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precastconcrete articles complete all as specified

M&L for modular Brick work with flyash bricks , straight or curved on plan to any radius in half brick built in cement mortar 1:4

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair Complete all as specified and s directed..

M&L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished with rough cast plasters finshes Complete all as specified and s directed..

M &L applying two coat of cement based paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface, complete all as specified.

M&L for Cement concret of type B1, 1:2:4 of (20 mm aggregate) in Coping , lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified.

M & L for preparation of new steel surfaces of any description over zinc oxide and apply two coats of synthetic enamel paint 10cm in width or girth, not otherwise described.

M & L for Demolition of padding concrete in roofs, any thickness, existing roof treament of any description in any condition including removing top surface and removing all the debries Complete all as specified

M & L for Dismatling roof treament on verticle surfaces in roofs parapet walls any thickness, existing roof treament of any description in any condition including removing top surface and removing all the debries Complete all as specified

M & L for Brushing neat cement slurry with 3 Kg/Sqm over a cleaned roof surface.

M&L PCC 1:3:6 type C1 (using 20 mm graded agg) as in padding concrete using water proofing compound @ 5% by weight to maintain required slope including coving to junctions of parapet and roofs . Complete all as specified

M&L for 5mm thick cement screed in cement mortar 1:4 with water proofing compound at the rate of 2% by weight of cement to have a smooth surface for laying of water proofing membrane.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surfaces with 0.40 liter/sqm of bituminious primer, by forced application complete in roof surfaces and on verticle surfaces, all as specified.

M & L for Applying evenly over the membrane a tackcoat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sq.m including cleaning surface over and below the membrane.

Supply only integral water proofing compound.Complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Tank Adaptor for 40 mm dia

Supply & Fix Ball valve of 40mm dia

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth Complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick in two layers 10 mm thick backing coat in cm 1:6 and 5mm thick finishing coat in cm 1:4 . mixed with water proofing @ 2% by weight of cement finshed surfaces fair and even (Note :- WPC will be measured separately). Complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion over coat of primer and putty on surfaces of walls Complete all as specified and directed by Engineer-in-Charge.

M&L preparation of newly plastered wall surfaces and applying three coats of white wash Complete all as specified and directed by Engineer-in-Charge.

Preparing newly plastered surfaces of celings and applying three coats of white wash Complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered ceiling surfaces and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of colour wash complete all as specified and directed.

Preparation of old decorated wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old decorated steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces any applying one coat of cement base paint complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light,fan, socket or power) including old unserviceable fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc.

Taking down carefully old unserviceable submain wiring with aluminum conductor cable 4/6/10/16 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc.

Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and including non-metallic rigid PVC conduit of 20 mm dia,concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flush box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc witch shall be measured and paid separately all as specified and directed for :-

(a) One light point controlled by one switch

(b) One Ceiling fan/Exhaust fan point controlled by one regulator / switch.

(c)One 3 pin socket outlet 5 amps socket on independent board.

(d) One 3 pin socket outlet 5 amps socket on Same Board.

(e) One light point controlled by two Nos of two way switches.

(f) One bell/buzzer point controlled by one push button.

All as per item No. 120 here-in-before but with 2.5 sqmm cable for one 3 pin socket outlet 15 Amps on independent board with 2.5 sqmm cable as earthing conductor.

S&F Modular Socket outlet 2 in 1, 3 pin, 6A 2 Module complete all as specified and as directed.

Supply and fix Modular switch flush type single pole one way 6 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

Supply and fix Modular switch flush type single pole two way 6 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

Supply and fix switch Socket combination 2 in 1, 6 Amps Flush type 3 module 240 Volts complete all as specified and as directed.

Supply and fix switch Socket combination 5 Amps / 16 amps, 5 in 1 flush type 3 Module 240 Volts complete all as specified and as directed.

Supply and fix ceiling rose 3 ways PVC / Polycarbonate, isolated body complete all as specified and as directed.

Supply and fix call bell Ding dong .

Supply and fix Step type electronic Modular fan regulator flush type2 Module complete all as specified and as directed.

S & F modular white cover plate with frame 3 module

S & F modular white cover plate with frame 6 module

S & F modular white cover plate with frame 8 module

S&F of Modular Metal flush box 3 Module

S&F of Modular Metal flush box 6/8 Module

Supply and fix Lamp holder PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S & F LED light fitting 4feet,1x20w,a trendy wall mounted battern,with extrunded aluminium housing,with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make C&S ELECTRIC Or Crompton ,Cat Part NoLTTB4F20WLED/W

S&F Energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser,Cat Part No SIRIUS/10W,Make C&S/ Cromption/Havells/philips.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.Make C&S Electric Or Crompton Cat Part N0:TTB2F10WLED/W

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply Only LED 9/7 watt bulb

Supply only LED DRIVER 35/40 watt suitable for 2 x 2 Recess type fittings

S&F for sub main wiring/power wiring with 2 runs of 4 sqmm PVC insulated stranded copper conducotr FRLS cable and one run of 4sqmm copper FRLS cable as earth lead in PVC conduit all as specified.

M&L for sub main wiring with 2 runs of 10 sqmm PVC insulated stranded copper conducotr FRLS cable and one run of 10 sqmm copper FRLS cable as earth lead in suitanle PVC conduit all as specified.

Supply and fix Sheet metal enclousers with socket plug top and MCB SPN 20A, 240 volts, with a two pin and earth plug socket complete with one single MCB 20 Amps, 240 volts (for AC ) including taking down old unserviceable old unserviceable Sheet metal enclousers with socket plug top complete all as specified and directed.

Supply and fix in repair MCCB three pole 415 volts 50 Hz , 63 amps, with rupturing capacity 16 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . .(Make : Havells/ABB/Standard/Legrand)

S&F Double Door Vertical TPN Distribution Box 4 way complete in SS enclosure with 200 amps rated busbar.Make : Standard /Lagrant/Havells/L&T or equalent

S&F MCB DB SPN 8 way complete in SS enclosure double door type with 200 amps rated busbar.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

(i) SP 6 To 32 AMP

(ii) SPN 32 AMP

Supply and fix Isolator TPN 40 Amp complete all as specified and as directed.

Supply and fix Isolator TPN 63 Amp complete all as specified and as directed.

Supply only condenser 2.5 MFD complete all as specified and directed. (Make : Usha/Keltran/uptran)

Removing the damaged and corroded exhaust fan louvers and replace with new louvers of size up to 300mm sweep complete all as specified and directed.

Taking down defective storage water heater of any capacity from buildings after disconnecting carefully water and electric connection, opening the bottom cover replacing the defective parts fixing the cover and refixing in original position reconnecting both water and electric connection and testing complete all as specified and directed. Notes :- Replacement of spares will be measured and paid for separately under respective items of the schedule here-in-after as supply only.

Supply and Fix only new heating element of capacity 1.5KW/2KW with rubber gasket complete all as specified and directed.

Supply and fix only thermostat suitable for storage type water heater complete all as specified and directed.

Supply and only Air release valve 15mm dia suitable for geyser complete all as specified and directed.

Supply and fix only Non return valve 15mm dia suitable for geyser complete all as specified and directed.

Supply and fix only Apparatus plate assembly suitable to fix thermostate, heating elements as of geyser and nuts etc complete all as specified and directed.

Taking down defective ceiling fan of any sweep along with fan blades and rods getting it serviced including Copper rewinding making it completely functional including replacement of spares etc all as specified and refixing the fan at given loacation complete all as specified and directed

S.T.S.CONSTRUCTIONS AGENCIES (BID ID -3205777)

SHREERAMFOUNDATION (BID ID -3206137)