Special Repair and Renovation of Centralized facilities in Economics Department in connection with NAAC Accreditation of Jammu University

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of 1.0mm thickness (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper having VOC content less than 50gm/ltr. of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work (Make Asian/Nerolac/Berger).

Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 5.0 mm (weight not less than 12.5 Kg/sqm)

Repairs to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand). All work upto floor V level.

Providing and fixing cupboard shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade I Type II) having one side decorative lamination and other side a balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of Engineer- in-charge including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac/Berger).

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood 30mm thick including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac/Berger).

Engagement of Labour for dismentalling/demolishing of damaged cupboard shutters Mazdoor

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac/Berger).

Dismantling tile work in floors and roofs laid in cement mortar including stacking serviceable material at site and disposal of rubbish outside the University Campus. For thickness of tiles 10 mm to 25 mm.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300 x 16 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150 x 10 mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Twin Rubber Stopper

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations, plinth and in superstructure including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand). All work upto floor V level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases including curing, centering, shuttering,finishing with cement concrete 1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). All work upto floor V level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. With TMT Bars. All work upto floor V level.

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand). All work upto floor V level.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including curing, edge moulding, rubbing & granite polishing etc. complete. Granite of any colour & shade (16 mm thick).

15mm Cement plaster on the rough side of single or half brick wall in cement mortar 1:4 (1 cement : 4 sand). All work upto floor V level.

Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades size as approved by Engineer-in-Charge in skirting, risers of steps andexcept burgundy, bottle green, black of any dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 sand) and jointing with grey cement slurry @ 3.3kg per sqm including coarse pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In all colours/shade as required.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing of water proof ply of approved quality (Green /Orchid /Century) including cost of labour nut bolts for fixing of frames fevicol, nails etc, filling the surface with chalk putty mixed with paint, sand papering to prepare the surface even and smooth applying priming coat of wood primer and then (two or more coats) with synthetic enamel paint of approved brand and manufacture (Asian/Nerolac). Nothing extra shall be paid for any wastage (for manufacture of cupboard) complete 19mm Thick Ply

Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality 1mm thick

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc (Make Parkash Surya/Jindal) 15 mm nominal bore

------------do--------------- 20 mm nominal bore

------------do--------------- 25 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (DRP/ShIP Make) 15mm nominal bore

-----------do------------------ 20 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm nominal bore

Providing and fixing PVC pipe of 4 kg/sqcm pressure of approved quality (Make Finolex /Prince/Supreme) 110 mm dia

------------do----------------- 75 mm dia

------------do------------------ 150 mm dia

Providing and fixing PVC Bend of Approved Brand and manufacture (Make Finolex/Prince/Supreme) 110 mm dia bend

-------------do------------------ 100 to 75mm Dia Floor Trap

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve (Jaguar Make)

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately

Providing and Fixing of branded Vitreous China Sinks/Wash Basin Flat Back and Rectange of Appoved brand and manufacture.white vitreous China Basin Size 550X400mm with a 15mm CP brass single hole Basin Mixer. Make Cera/Jaguar/Hindware/Parryware)

Providing and fixing White Vitreous China Pedestal for Wash Basin Completely recessed at the back of reception of pipes and fittings (Parryware/Hindware/Cera)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid (Make Parryware/Hindware/Cera)

Providing and laying in position cement concrete of specified grade including curing, centering and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing, centering and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick

P/F solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ Jindal/Cera) White colour

Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms.

P/F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm

Providing and Fixing C.P Brass Phase of approved quality.

P/F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

P& F CP jet with PVC pipe to be fixed with WC of approved quality.

Providing and Fixing ISI grating of approved quality.

Providing and Fixing Syphon set of approved quality.

Providing and Fixing Long bend of approved quality.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position using structural steel etc. as required.In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works including applying a coat of steel primer and then painting with synthetic enamal paint (two or more coats) of approved brand and manufacture (Make Asian/Nerolac/Berger).

Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete Stainless steel (grade 304) wire gauze of 0.5mm dia wire and 1.4 mm aperture on both sides.

Higher charges of welding set including cost of labour (welder with helper) and welding rods etc.

Engagement of Labours for different works Carpenter II Class

------------do-------------- Mazdoor

------------do-------------- Blacksmith II Class

Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing PVC Panelling to walls including openining Electricals fittings including cost of mouldings, chaneels whereas necessary all job complete (Heavy duty). Sample to be got approved from the Engineer-in-charge.

Uprooting of rank vegetation/Plants grown on walls/roofs by way of dosmantling brick masonary/concrete, taking out of the roots and then doing the brick work and refinishing the wall including scaffolding wherever required. All work upto floor V level. (Cost of brick masonry & finishing shall be paid separately).

M/S RICKY LANGER GUPTA

M/S IMRAN KHAN

MUDASIR BASEER ZARGAR