Provn of Perimeter Wall at Demolition Ground at Mil Stn Beas under GE Kapurthala

Amount

M&L for surface dressing of soft/loose soil n.exc 15cm deep and getting out complete all as specified and directed.

M&L for excavating over areas, not exceeding 1.50m deep and getting out in soft/loose soil complete all as specified and directed.

M&L for removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. i) Watch tower-15.24 ii) Earth work-1000.00 iii) Boundary wall-477.48

M&L for dismantling of posts or struts (wood, steel or RCC) any section, embedded in concrete, bricks works masonery, etc of any description including taking out embeded portion and making good distrubed ground complete all as specified and directed.

M&L for dismanting of galvanised mild steel barbed wire from RCC or Iron post of any size, section, including taking out from frame complete all as specified and directed.

M&L for dismantling of galvanised mild steel fencing wire mesh, any type and size, section including taking out from frame complete all as specified and directed.

WATCH TOWER WORKS

M&L for excavation in trenches in soft/loose soil n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and n.exc 10 Sqm on plan and n.exc 1.5m depth and getting out complete all as specified and directed. i) Watch tower-31.74 ii) Gate Work-12.96 iii) Boundary wall-1657.94

M&L for excavation in trenches of soft/loose soil exc 1.5m wide and exc 1.5m in depth for foundation etc and n.exc 10 Sqm on plan and exc 1.5m depth and getting out complete all as specified and directed. i) Watch tower-10.58 ii) Gate Work-0.86 iii) Boundary wall-107.43

M&L PCC (1:4:8) type B-2 using 40mm graded stone agg as in foundation filling and mass concrete complete all as specified and directed. i) Watch tower-2.12 ii) Gate Work-0.86 iii) Boundary wall-133.84 iv) Path-711.00 v) Fencing-21.06 vi) Boundary Pillar-5.88

M&L for RCC M-25 (20mm graded aggregate) for foundations, beams, plinth beams, base for columns etc under reamed pile and basement slab and mass concrete complete all as specified and directed. i) Watch tower-13.64 ii) Gate Work-2.86 iii) Boundary wall-343.59

M&L for TMT bar 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. i) Watch tower-274.00 ii) Boundary wall-30185.30 iii) Boundary Pillar-1125.41 iv) Fencing-4270.74

All as per description of Sr item No 11.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. i) Watch tower-134.62 ii) Gate Work-176.91 iii) Boundary wall-10908.79 iv) Boundary Pillar-2234.57

Use and waste of form work to sides of concrete foundations, footings, base of columns, raft and raft beams, side and sofits (if any) of foundation and plinth beams, bands, pillars to produce external splayed bar and similar work vertical or to batter complete and similar work complete all as specified and directed. i) Watch tower-48.00 ii) Gate Work-18.71 iii) Boundary wall-957.72

S&F of mild steel frame work of angle iron as in Guard Post, doors, gates of angle or other section frame with gusset plates, MS plates, rail and fastening and heavy bracketing frame including distance piece cleat etc complete drilled for fixing of roof sheet, steel sheeting or other covering, doors, staire, truss, bracing of angle iron section, base of sentry post etc, to be prepare for hanging or sliding with and including either hooks, weld, nut and bolt and hinges and fastening and fixing in structure complete all as specified and directed, including all necessary welding drilling for holes, flat iron and all necessary drilling, bolting or reveting etc and similar work quality conforming to Fe-410-W (Gde E-250) quality complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, fixed with self tapping screws complete all as specified and directed.

S&F 3mm thick fibre glass for security post and assembled with complete accessories, any standards with screw etc complete all as specified and directed.

S&F second class hard wooden planks 40mm thick planed one side, with butt joints and fixed with nails nut and bolt angle iron frame including neceesary drilling, to frame and with nails supplied and fixed with frame of iron on stage complete all as specified.

M&L preparation of new or previously untreated steel surface of any discription over 10 cm width or girth not otherwise discribed and applying two coats of synthetic enamel paint over a coats of red oxide zinc chrome primer complete all as specified and directed. i) Watch tower-101.40 ii) Gate Work-45.90 iii) Boundary wall-72.36 iv) Fencing-947.08

M&L for preparation of new or previously untreated wooden surfaces of any discription over 10cm width or girth not otherwise discribed and applying two coats of synthetic enamel paint over a coat of Pink primer complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm each layer complete all as specified and directed. i) Watch Tower- 27.08 ii) Boundary Pillar- 13.32 iii) Boundary wall-1285.98

PATH WORKS

M&L for surface excavation of soil/loose soil n.exc 30cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

M&L for hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for sand cusioning under floor of interlocking tiles including spreading & levelling and removing unwanted materials from sand complete all as specified and directed.

S&F machine pressed precast concrete rubber moulded interlocking paver block, joint should be filled with Grey coment and pigment, any shape and size confirming to IS 15658-2006 of 60mm thick , M-35 Grade complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks (1:3:6) 20mm graded stone aggregate exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15mm thick with CM (1:4) on fair faces of brick work or concrete surface to be finished even and smooth (without using extra cement) complete all as specified and directed. i) Path work- 2749.20 ii) Boundary wall- 2235.60

M&L for preparation of new or previously untreated concrete surfaces of any discription over 10 cm width or girth not otherwise discribed and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. i) Path work- 2212.00 ii) Boundary Pillar- 241.20 iii) Boundary Wall - 3079.45 iv) Gate work - 25.10

SECURITY FENCING

Excavation in post holes for soft/loose soil (or similar holes) each n.exc 0.50 cum and getting out, returning filling in and ramming earth with broken rubble mixed with earth around in layers n.exc 25cm, watering etc and removing surplus soil to a distance n.exc 50m and making good surface in loose/soft soil complete all as specified and directed. i) Fencing - 1040.00 ii) Boundary Pillar- 41.16

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and directed.

M&L for mild steel work as in fencing post and struts in fencing, fixed independently, including cutting top to shape and bending as directed including all necessary welding, drilling for holes, notching for wire etc, flat iron fillets (for securing barbed wire and mesh etc including all necessary drilling, bolting or rivetting etc and similar work quality conforming to Fe-290, Gde E-165), complete all as specified and directed. i) Fencing- 31194.69 ii) Boundary Wall - 1614.14

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc complete including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type with 4mm dia GI wire and average size of mesh 75mm x 75mm incl line wires, to any type of standards rails, staining bolts etc incl provn of binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed.

S&F mild steel screws bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of neck in mm 16 to 20 mm complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc (each line of wire to be measured) complete all as specified and directed. i) Fencing-142.20 ii) Boundary wall - 56.07

M&L for preparation of new steel furfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

GATE WORKS

M&L for RCC M-25 (20mm graded aggregates) for beam, cantilevers, lintels, columns pillars, post, arches slabs, canopies etc similar work complete all as specified and directed. i) Gate works-2.19 ii) Boundary wall - 81.65

S&F MS round bar 10mm dia and above cut to length bend to shape required, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire wtc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290, Gde E-165 and confirming to IS complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions, pillars to produce external splayed bar and similar work vertical or to batter complete and similar work all as specified and directed. i) Gate works-24.30 ii) Boundary pillar - 422.40

S&F of mild steel frame work as in doors or gate of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing with other accessories with necessary cutting, welding and wending as site requirement complete and fixing in Col structure complete all as specified and directed conforming to Fe-410-W (gde E-250) quality-A complete all as specified and directed.

M&L for rendering 05mm thick with CM (1:4) on fair faces of brick work or concrete surface to be finished even and smooth (without using extra cement) complete all as specified and directed. i) Gate works-25.11 ii) Boundary wall - 843.85

BOUNDARY PILLAR

M&L for RCC M-25 (20mm graded aggregates) for wall, retaining walls, pillar boundary and the like of similar works any thickness, above top of footings including attached pilaster and buttressess and mass concrete complete all as specified and directed.

M&L for rendering 10mm thick with CM (1:4) on fair faces of concrete surfaces complete all as specified and directed.

BOUNDARY WALL WORKS

M&L for burnt brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built with cement motar (1:6) complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, beams, lintels including supports overhangs etc for fair finished work complete all as specified and directed.

S&F PVC (SWR) pipes for weap hole, single socketed in any length 110mm dia for passing of rain water from compound wall at interval of wall complete all as specified and directed.

NARINDER KUMAR SONS (BID ID -3242371)

WELWAYS ENGINEERS INDIA (BID ID -3245304)

M/S Vinod Kumar (BID ID -3247328)

Sachdeva Builders (BID ID -3247798)

UNITED SAINI BUILDERS (BID ID -3248050)