Loading…
Loading…
Tender Value
₹2.4 L
EMD Value
₹4,776
Closing Date
3 Aug 2026, 3:00 pmDue today
Executive Engineer Hort. Divn No.1, M.C., Chd.
Executive Engineer Hort. Divn No.1, M.C., Chd.
Providing and fixing of hut with benches and topiary figure in park near house no. 1321, Sector 37, Chandigarh under WDF.
2026_MCC_91286_4
MCC/H-1/45/2026
Open Tender
Civil Works
Percentage
60 days
Providing and fixing of hut with benches and topia
please refer tender documents
2 documents required · 2 mandatory
₹0
₹4,776
27 Jul 2026
27 Jul 2026
3 Aug 2026
27 Jul 2026
3 Aug 2026
27 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of Hut 14’x14’ and 8’ above ground level & 2’ below ground level made of 4” dia M.S. pipe medium class. M.S. angle iron 30x30x3 mm, M.S. Plate 9”x9”x8mm & MS pipe 1 ½ x3” (14 bg.). The ceiling made with corrugated sheet (20bg.) powder coated on MS pipe 1 ½ x1 ½ (16b.) 1’x1” (16bg.) and on the top MS sheet ridge piece of 20 gauge. The MS pipe 4” dia grouted with C.C. 1:2:4 in columns including steel and kota stone flowing to be laid on C.C. 1:8:16 in between toe wall and complete hut. Ceiling of corrugated sheet is to be painted with special quality paint over one coat of primer complete as per drawing and to the entire satisfaction of the Engineer-in-charge. | - | Nos. | 0.29 | - |
| 2 | Providing and fixing of steel pipe benches of size length 6’, seat width 18” back width 15”, four legs height 20” each with all the frame of seat and back made out of 1” (25mm) nominal bore 2”x1” (50x25 mm) of 14 gauge 4 strips in the back ad 5 strips at the bottom with MS flat support of 1 ½” x3/16” (40x5mm) strips in the centre of the below and back seat and provided to legs having arranged for embedded nicely welded. The rate shall includes the priming coat (special quality complete on all exposes and also 4” long anchorage piece welded at the bottom of the legs. The benches shall further be embedded in ground in cement concrete 1:2:4 block of size 1’x1’x1’ complete in all respects as per entire satisfaction of the Engineer-in-Charge | - | Nos. | - | - |
| 3 | Providing and fixing of topiary figure of Duck family compelte as per Drg. No. 1.
Male Duck height = 5’
Female Duck height = 4’
Baby Duck height = 4’ | - | Nos. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.64 MB
BOQ_115647.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].