GE 861 EWS-35/2024-25

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store/credit to contractor complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in floor to receive floor finishes etc. complete all as specified and directed.

M&L for Non skid ceramic coloured joint free tiles exceeding 0.18 sqm but not exceeding 0.38 sqm 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:6) for laying floor finish complete all as specified and directed.

M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x250x7mm/ 450x350x7mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed in cm 1:4 complete all as specified and directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs including cover fillets etc. complete all as specified and directed.

S&F for anodised aluminium snap grid of size 605 x605 mm frame work for false ceiling including straining with GI wire 4 mm dia complete all as specified and directed.

S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm thick plain PVC sheet suitably placed in false ceiling grid made of aluminium GI/MS as per specification and drawing complete all as specified and directed.

S&F for 9 mm thick veneered decorative plywood , grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screw to timber frame on wall and ceiling etc complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails Sectional area exc 06 sqcm but not exc 13 sqcm complete all as specified and directed.

S&F 40mm thick, 2nd class hardwood planks, planed one side with butt joints and fixed with nails fixed in any situation complete all as specified and directed.

M&L for weather boarding in 2nd class hardwood clean swan , plain, 20 mm thick feather edged, fixed with 30 mm laps joints complete all as specified and directed.

S&F in repairs 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F in repairs Solid PVC Wall Lining consisting of Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including roof covering etc. complete all as specified and directed.

S&F for galvalume aluminium zinc coating GI based pre-painted corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. (Make : Crill/Tata Blue scope/Jindal)

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, fixed with self tapping screws complete all as specified and directed. (Make : Crill/Tata Blue scope/Jindal)

M &L for preparing plastered or unplastered OLD SURFACES of walls and applying two coats of Cement base paint on walls.(External) including removal of existing treatment complete all as specified and directed. (Make : Crill/Tata Blue scope/Jindal)

M&L for applying 3 mm thick wall care putty on OLD SURFACES of wall and including two coats of oil bound distemper on plastered/ unplastered surfaces of wall including complete removal of existing treatment complete all as specified and directed.

M &L for applying two coats of white wash on OLD SURFACES of ceiling including complete removal of existing treatment complete all as specified and directed.

M&L for two coats of synthetic enamel paint on OLD WOODEN SURFACES including preparation of surfaces over 10cm width or girth complete all as specified and directed.

M & L for preparation of OLD STEEL SURFACES over 10 cm width or girth and applying two coats of synthetic enamel paint including roof painting complete all as specified and directed.

S&F in repairs of double door type SPN DB 12 Way, 240V with 200A busbar each phase, with metallic double door type IP-43 IK 09 protection suitable for housing MCB's complete all as specified and directed. Make: Legrand /Siemens/ABB C&S. Note : MCB DBs shall be concealed in wall where ever possible including making good the surface to match with surrounding.

S&F in repairs of double door type SPN DB 08 Way ,240V with 200A busbar each phase , with metallic double door type IP-43 IK 09 protection suitable for housing MCB's complete all as specified and directed. Make: Legrand /Siemens/ABB/C&S. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repairs of double door type SPN DB 04 Way, 240V with 100A copper busbar each phase , with metallic double door type IP-43 IK 09 protection suitable for housing MCB's complete all as specified and directed. Make: Legrand /Siemens/ABB/C&S. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repairs of double door type vertical type TPN DB 4 Way ,415V with 200A busbar, with metallic double door type IP 43 IK 09 protection suitable for housing MCCB's complete all as specified and directed. Make: Legrand /Siemens/ABB/C&S. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S & F MCB SP 6 Amps,10KA, 'B' series 240V complete all as specified and directed. Make : Legrand/Siemens/C&S/ABB

S & F MCB SP 10 Amps,10KA, 'B' series 240V complete all as specified and directed. Make : Legrand/Siemens/C&S/ABB

S & F MCB SP 16 Amps,10KA, 'B' series 240V complete all as specified and directed. Make : Legrand/Siemens/C&S/ABB

S & F MCB SP 20 Amps,10KA, 'B' series 240V complete all as specified and directed. Make : Legrand/Siemens/C&S/ABB

S & F MCB SPN 40 Amps,10KA 'C' series 240V complete all as specified and directed. Make : Legrand /Siemens/ABB/C&S

S & F MCB SPN 32 Amps,10KA 'C' series 240V complete all as specified and directed. Make : Legrand /Siemens/ABB/C&S

M&L for sub-main wiring with 2 runs of 10 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade Capping casing not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxes, reducer etc as required, including one run of 10 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unserviceable sub main wiring and making good the disturbed surfaces/location complete all as specified and directed. Note (1) :- 3 (Three) runs of 10 sqmm wires (2 main wires + one earth wire) and one run of PVC 25mm casing and capping shall be measured as one unit length for payment purpose. Note (2) :- (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

Taking down carefully old U/S point wiring copper/Aluminium (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material to store for keeping in safe custody/credit to contractor and making good to disturbed surfaces complete all as specified and directed.

M&L point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including pvc moulded box/hylem sheet/MS sunken box fixed on wall for fixing the switches, switch, socket complete all as specified and directed. (a) One light point controlled by one 5A switch Note:- a) Colour coding shall be followed as given below:- i) Phase - Red/Yellow/Blue ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (c) Make of wire :- Havells/ Finolex/ Plaza/Gloster/Polycab.

(b) Description ditto as per item no 34 above but for One Bell point control by one 5 Amp bell push switch complete all as specified and directed.

(c) Description ditto as per item no 34 above but for One Fan point controlled by one 5 Amp switch complete all as specified and directed.

(d) Description ditto as per item no 34 above but for One 5 Amp switch socket combination on the same board complete all as specified and directed.

(e) Description ditto as per item no 34 above but for One 5 Amp switch socket point on independent board complete all as specified and directed.

M&L point wiring complete with 2.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC moulded box/ hylem sheet ISI marked fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 2.5 Sq.mm as earth continuity conductor connected to common earth dolly for 15 amp swich socket on independent board complete including pvc moulded box/hylem sheet/MS sunken box fixed on wall for fixing the switches, switch, socket complete all as specified and directed. NOTE:- a) Colour coding shall be followed as given below:- i) Phase - Red/Yellow/Blue ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (c) Make of wire :- Havells/ Finolex/ Plaza/Gloster/Polycab. Plaza/Gloster/Polycab.

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by EIC. Make :Cone /Anchor/legrand/Crabtree

S & F switch piano flush type single pole one way, 5/6 Amps complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

S&F Bell push, 5/6 Amps, 240 volts SP complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

Supply and fix switch sockets combination Box type 2 in 1, 3 pin, 5 & 15 Amps flush type universal, 240 Volts AC complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

Supply and fix in repair switch sockets combination Box type 2 in 1, 3 pin, 5 & 15 Amps flush type universal, 240 Volts AC complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

Supply and fix switch socket combination box type multi purpose 3 pin 5 Amps controlled by one switch flush type 240 Volts AC complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

S&F in repair for Socket 3pin 5 Amps flush type, 230 volts complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

S&F in repair for Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type, 230 volts complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

S & F fan regulator electronic step type and making all necessary connections complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

S & F bell, AC, 230 volts, SP complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

S & F lamp holder PVC/polycarbonate insulated body type complete all as specified and directed. Make :Cone /Anchor/legrand/Crabtree

S&F in repacement Plug top 5/6A complete all as specified and directed.

S&F in repacement Plug top 15/16 A complete all as specified and directed.

Supply and fixing in repair wall/surface mounted 20W LED batten fitting 4' long with engineering plastic batten with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with twin core copper conductor cable with suitable size and complete all as specified and directed. Make : Bajaj/Wipro/Philips

Supply and fixing in repair of 9 watt pin type LED bulb complete all as specified and directed. Make- Bajaj cat /Philips/Wipro

Supply and fixing in repair new generation recessed mounting downlight ultra slim ROUND Luminaire 12watt and high translucent diffuser provides high quality economic energy saving lighting complete all as specified and directed Suitable for modular/POP/Gypsum ceiling. Make : Bajaj/Wipro/Philips

M&L for replacement of short circuit/over heated winding from stator of ceiling fan of any make having 1200mm sweep with matching gauge & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling complete re-assembling of fan with testing etc complete all as specified and directed.

Disconnecting & taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size & greasing ball bearing, with specified quality grease and painting & re-commissioning the same including making electric connection complete all as specified and directed.

Supply and fixing in replacement of gun metal bush with suitable size for ceiling any make any size and sweep complete all as specified and directed. Make: Bajaj/Khaitan/Oriental

Supply and fixing in replacement of ball bearing suitable for 1200/1400 mm sweep ceiling fan of any make complete all as specified and directed.

Supply and fixing in replacement of canopy (top & bottom) of ceiling fans any make/size with canopy of matching colour complete all as specified and directed.

Supply and fixing in replacement of rubber reel with nut, bolts, split pins etc of ceiling fan with rubber reel heavy duty for hanging fan complete all as specified and directed.

S&F in replacement of connector block of ceiling fan suitable size of approved quality complete all as specified and directed.

S&F in replacement of capacitor of ceiling fans with capacitor having capacity 2.5mfd complete all as specified and directed. Make-Bajaj/Havells/Universal.

S&F in replacement of blade of ceiling fan of any make with aluminium blade duly painted of sweep 1200mm including provision of screws etc fixing purpose complete all as specified and directed.

S&F in replacement of heating element AC 230 Volt of rating 1500W ISI mark as per existing any type complete all as specified and directed.

S&F in replacement of heating element AC 230 Volt of rating 2000W ISI mark as per existing any type complete all as specified and directed.

S&F in replacement of thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius complete all as specified and directed.

S&F in replacement of geyser assembly suitable for existing geyser 25-50 Ltrs 230 volts AC all as per sample complete all as specified and directed.

S&F in replacement of geyser bolt & nut suitable for existing geyser 25-50 Ltrs 230 volts AC all as per sample complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode of size 600x600x6.0mm thick burried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI wire 4.00mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 15mm bore from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or complete all as specified and directed including testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall deem to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item of Sch A part-IV (Sec-I) . (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department .

M/S HAFIZ AND SONS (BID ID -3083044)

M/S LUCKY BUILDERS (BID ID -3077396)