Painting, polishing false ceiling,wooden partition wall pannelling ,door work and other misc civil work at cabin no 518 lift machine room and 3rd floor chief engineer hydel office at shakti bhawan extn building lko

Amount

Laying and Jointing PVC Pipe. Heading

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Applying BIRLA PUTTY or equivalent putty on previousaly birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work

Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra)

Same as above in item no.3 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint.

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.

As in item 5 above but for every coat after first coat.

Spirit polish over new wood work after rubbing down the surface, with sand paper to give smooth and shining surface including cost of all materials, labour, T&P required for proper completion of the work.

Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profile white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong Miniral Fobre Sound Absorbing Sheet including cost of all materials,labour and T&P etc. required for proper completion of the work.

Providing & Making & Fixing of Wall Panneling as per drawing frame work to be covered with 12 mm thick plywood from the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate and grooves to polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work

Supply of mar keen cloth for binding file required for proper completion of the work.

Supply of labor for binding file and sifting file and furniture required for proper completion of the work.

Dismantaling doors and windows chowkhats including stacking of materials as directed by Engg-in-Charge within a distance of 60 meters.

Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work.

Supply and fixing brass polished godrej mortise lock of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Providing & Making & Fixing of Wall Pannelingas made with 6mm Water Proof & Fire Retardent ply fitted with the help of nails sulution on wall surface as per the approved design all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

Providing ,making & fixing full height wooden partitions as per drawing from seasoned wood of MIRINDI frame of 2"X1.5" size placed horizontally and vertically both way @ 2 ' c/c. the frame work fitted in floor with the help of nails ,screw then frame work to be covered with 12 mm thick plywood from both side with the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate on both sides and grooves to r polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Providing & fixing of 12 mm toughned glass door with all hardware as per design with edge polish m/c top & bottom pivot and bottom lock with handle all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

Providing & fixing of Plotter cutting film make crytal as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

Providing and fixing ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACP of 4.0 mm thickness

Providing and fixing superior, approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings at DIFFRENT cabinS no- 604,605of Shakti Bhawan Extn, Lucknow as per direction of Engineer in charge. The work includes cost of all labour, material and T&P etc.

Providing ,making & fixing wall panneling as per drawing from seasoned wood of MIRINDI frame of 2"X1.5" size placed horizontally and vertically both way @ 2 ' c/c. the frame work fitted in floor with the help of nails ,screw then frame work to be covered with 12 mm thick plywood from the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate and grooves to polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Providing fabrication of wooden cabinet of dept 0.42Mtr. to be fitted at cabin no-518 of Shakti Bhawan Extn building having 5 adjacent cup-board of 0.45X 1.3 Mtr.t wo cupboard divided by one middle vertical member..wooden cabinet fabricated with 19mm thick National or Swastik /green Block board or equivalent pasted with 1mm thick sunmica laminate of approved quality texture and shade on all outer exposed surface.The cup-board shall have lockable magnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle and one . fornt side coverd with flap door fabricated with 19 mm block boradThe visible exposed surface shall be glued with 1mm thick sun mica of approved quality shade and texture. The inner surface shall be glued with0.8 mm thick pointed sun mica of approved quality shade and texture. The cut edges and ends shall be finished with spirit polish teak wood beading of section. . The work includes cost of all labour, material, T&P etc. required for proper completion of work.

Repairing of old cushioned officer chair at cabin no -518 of SB Extn building, removing of old damage upholstery then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of chair using 50 mm thick sleepwell foam 32 denstry, Approved. The work include cost of all labour,material T&P required for proper completion of work.

Providing & fixing of Excutive office computer work station cum work table in room no-518 of Shakti Bhawan Extn. Building. The Unit shall be of size 1.2X0.7 mtr worktop & 0.76 mtr hight. The Entire Above Unit Shall be Fabricatrd with 19 mm Block Board Superior Quality Swastik Made all Extirior surface with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading.t.one no drawer nd one flap door fabricated with the help of19 mm block board Swastik Block board /green or equivalen The cup-board shall have lockable magnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle The main table rack shall be approved matel handle and necessery m.p lock. all drawrs shall be provided with approved qaulity slider machnism. The foot board shall be also provided in above three peace. Excutive work station .The work include cost of all labour,material T&P required for proper completion of work.

Repairing of of Executive office computer work station cum work table of size-1500x900x750 in diffrent room OF Shakti Bhawan Extn. Building. Top surface finished with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading. . one number lockable drawersone lockable cupboard 400mm wide finished with1 mm sunmica laminate f .one no lock and one no handle fitted in drawer and cupboard . & back side covered. .The work include cost of all labour,material T&P required for proper completion of work.

M/S R K CONSTRUCTIONS AND SUPPLIERS

Satguru Foam