84797PROVISION OF COMPOUND WALL AT 02 ARJUN MARG IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE.

Amount

Surface excavation n exc 30 cm deep and getting out in hard /dense soil complete all as directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in hard /dense soil complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and as directed.

Removal of excavated soil to a distance exc 250 m and n exc 500 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete, M25 Gde, design mix, (using 20 mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete, M25 Gde, design mix, (using 20 mm graded crushed stone aggregates) as in columns, piers, pillars, posts and similar items complete all as specified and as directed.

M&L for reinforced cement concrete, M25 Gde, design mix, (using 20 mm graded crushed stone aggregates) as in beams, lintels etc similar items complete all as specified and as directed.

M&L for Formwork to sides of concrete foundation footing, bases of columns, plinth beams and similar works flat rough finished surface of concrete complete all as directed.

M&L for Formwork to sides of pillers, post, struts, columns and stanchions flat rough finished surface of concrete complete all as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as directed.

M&L for brick work with flyash brick, stright or curved on plan exc 6 m mean radious, built in cement mortar (1:4) complete all as specified and as directed.

S&F TMT steel bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colunms, hooking ends and binding with and including mild steel wire not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

S&F TMT steel bars 5 mm dia and over, upto and incl 10 mm dia in stirrups, spacers and binders etc incl cut to length, bent to shape required including cranking, bending sprially for hooping for column, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia etc complete all as specified and as directed.

M&L for PVC pipes of 110 mm bore fixed in masonary wall as in weep holes / spouts complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work / block masonry /concrete surfaces and surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on other than fair faces of brick work / block masonry surfaces and surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company, Depot, Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces complete all as specified and as directed.

M&L for forming 20 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and as directed.

S&F Framed work such as grills with ornamental and intricate design, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of nwater tanks and similar work conforming to Fe. 290.Gde-E-165 complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed.

M&L for painting on steel and iron surfaces of any description with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surface n exc 10 cm in width or girth complete all as specified and as directed.

Vijay Construction and Company

K.S.JITE AND SONS

Ridhi Constructions

Suraj Sukhdev More

Pratap enterprises

M/S - R K CONSTRUCTIONS

GANESH ELECTRICALS AND AIR CONDITIONERS

M/s Akshay Contruction

M/s DEVRATAN ENTERPRISES