Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST QUOTED BIDDER | |
| 2 | L2₹46.0 L+₹6.0 L (15.1%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER | |
| 3 | L3₹47.8 L+₹7.8 L (19.6%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST QUOTED BIDDER |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SECUNDERABAD
CWE AF SECUNDERABAD BOWENPALLY POST SECUNDERABAD 500011
ADDITION / ALTERATION AND IMPROVEMENT TO BUILDING NO P 149 AT AFS BEGUMPET UNDER GE (AF) HAKIMPET
2022_MES_555596_1
84698/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF HAKIMPET
AS PER NIT
9 documents required · 9 mandatory
₹500
GE AF HAKIMPET
₹89,000
Yes
12 Nov 2022
1 Oct 2022
9 Nov 2022
1 Oct 2022
7 Nov 2022
24 Oct 2022
1 Oct 2022 - 15 Oct 2022
Amount
SCHEDULE 'A' PART -I (B&R PORTION) :- Demolition of cement concrete not exc.15 cm thickness in ground/1st floors including floor tile complete including removal of debries to a distance exc. 150 m and not.exc. 200 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
Demolition of brick work or ston / boulder masonry, built in cemnet mortar including all quoins, pillars etc/ complete all as specified and as directed.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and type C-1 mix , PCC 1:3:6 using 20 mm graded stone aggregate, in cement mortar 1:6 complete all as specified and as directed.
M&L for 25 mm thick cement concrete 1 : 2 : 4 type B-1 mix (using 20 mm graded crushed stone aggregate) laid in base, and cement concrete surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes.etc complete all as specified and as directed.
M&L for Vitrified ceramic coloured /printed tiles double charged of area exc 0.36 sqm and n.exc 0.42 Sqm, 10 mm thick, in floors / skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles. (Screed bed shall be measured and paid for separately) complete all as specified and as directed
Description all as per Ser item No 7 above but on verticle surfaces complete all as specified and as directed.
M & L for non skid ceramic coloured /printed tiles of area exc 0.11 sqm and n.exc 0.18 sqm, 6 to 7 mm thick, in floors/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles complete all as specified and as directed. (NOTE :- Screed bed shall be measured and paid for separately)
Description all as per Ser item No 9 above but on verticle surfaces complete all as specified and as directed.
M&L for rendering to brick surfaces, 10 mm thick in cement mortar 1:4, scoured for fixing tiles /stone slabs etc complete all as specified and as directed.
M&L for Glazed ceramic tiles in vertical surface 350 mm x 250 mm x 7 mm / 450 mm X 350 mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and as directed. (NOTE :- Screed bed / dubbing coat shall be measured and paid for separately)
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms, stair case and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.(NOTE :- Screed bed shall be measured and paid for separately)
Rounding to edge of stone slab one edge, such as in stop, cooking plateform, and other similar situation complete all as specified and as directed.
Complete removal of existing treatment from walls including scrapping and removing the entire scales of existing treatment complete all as specified and as directed.
Description all as per Ser item No 15 above but on ceilings complete all as specified and as directed.
M&L for applying two coats of oil bound distemper on surfaces of walls over a coat of primer including preparation of surfaces and application of 1.0 mm thick wall care putty finish complete all as specified and as directed.
Description all as per Ser item No 17 above but on Ceiling surfaces complete all as specified and as directed.
Demolition of cement concrete in roofs, floors (other than ground floors), etc. (unreinforced) including old tarfelt & cement mortor bedding and plastering, tiles etc complete all as specified and as directed.
M &L for cutting out cracks to 'V' section in existing roofs or terrace cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.
M & L for Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces complete all as specified and as directed.
M&L for 25 mm average thick PCC 1:2:4 type B-0 mix (using 12.5 mm graded stone aggregate) as in padding concrete on RCC roof surface finishing the surface even and smooth without using extra cement, complete all as specified and as directed.
M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement , finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Supply Only Liquid water proofing compound complete all as specified and as directed.
M&L for Disconnecting existing tanks, exc 500 ltr and not exc 1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. (Cleaning repairing, etc)
S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks incl suitable nipple( cylindrical shape with vertical top closed) hoisted and fixed in position including taking down unserviseable water tanks complete all as specified and as directed.
Description all as per Ser item No 26 above but capacity of 1000 ltrs complete all as specified and as directed.
S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and as directed.
M&L for cleaning the roof surface and applying oil bond bitumen primer @ 0.20 kg / sqm providing and laying 4.0 mm thick APP modified water proofing membrane weight not less than 4 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800/N/sqm cum tearing strength 180N with minimum of 10 cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2 kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed.
M&L for cleaning the vertical surfaces of roof and applying oil bound bitumen primer @ 0.20 Kg / Sqm providing and lying 4.0 mm thick APP modified water proofing membrane weighing not less than 4.0 Kg / Sqm reinforced with non woven polyster mat weighing not less than 160 gm/Sqm having softening point not less than 140 degree centigrade. longitudinal tensile strength not s than 800 N / Sq cm tearing strength of 180 N with minimum of 10 cm side laps and 15 cm end laps by application of torch, applying a coat of blown grade hot bitumen over the membrane @ 1.2 Kg/Sqm over complete area of membrane complete all as specified and as directed.
Demolition and breaking up AC drain pipes 100 mm internal dia of pipes set in cement mortor of any description complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore complete all as specified and as directed.
M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 mix for 100 mm dia pipe complete all as specified and as directed.
M&L for SWG drain pipe grade `A` of 100 mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.
S&F PVC (SWR) junction double,(single T) equal or unequal. 110 mm dia complete all as specified and as directed.
S&F PVC (SWR) junction double,(double T) equal or unequal. 110 mm dia with access door complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.
S&F PVC (SWR) bend / shoes of 110 mm bore complete all as specified and as directed.
S&F in repairs 25 mm dia powder coated fancy type aluminium curtain drapery rod fixed to curtain brackets complete all as specified and as directed. Note: Curtain brackets shall be measured and paid under relevant item.
S&F fancy type curtain brackets (pair of 02 No's) fixed to concrete or brick or stone masonry surfaces of walls including making good if required any in repairs complete all as specified and as directed.
M&L for Resecuring or easing and adjusting, without taking down shutters (Per Leaf) of any description not exceeding 1.0 Sqm each complete all as specified and as directed.
M&L for Resecuring or easing & adjusting, without taking down shutters (Per Leaf) of any description exceeding 1.0 Sqm but n exc 2.0 sqm each complete all as specified and as directed.
Hacking out old broken of glaass from wooden frame or stone concrete or brick with putty or fixed with nail complete all as specified and as directed.
Supply and fix sheet glass, ordinary quality, 4 mm thick, in squares not exc 0.50 Sqm in each pane and glazing with oil putty/wooden bedding complete all as specified and as directed.
Taking down chowkats or frames not exc. 1.5 Sq mtr each with shutters without taking off shutters from the frames complete all as specified and as directed.
Description all as per Ser Item No 46 above but exc 1.5 Sqm and not exc 4 sqm icl steel window each complete all as specified and as directed.
Taking down shutters of any description not exc 1 Sq mtr each complete all as specified and as directed.
Description all as per Ser Item No 48 above but exc 1.0 Sqm and not exc 2.0 sqm each complete all as specified and as directed.
Supply and fix mild steel work as in hold fasts including sanding and tarring etc complete all as specified and as directed.
Supply and fix solid PVC moulded door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed.
Supply and fix 30 mm thick factory made PVC moulded door panel shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mm x 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed.
S&F 75 mm long stainless steel butt hinges for PVC door frame complete all as specified and as directed.
Supply and fix 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.
Supply and fix 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed.
Supply and fix 150 mm size extruded aluminium door handles fabricated type fixed in repairs complete all as specified and as directed.
Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed.
S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.
Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
S&F 35 mm thick Flush shutters, solid core construction, with block board core and commercial type on both sides with 1mm thick sunmica finishes complete all as specified and as directed.
S&F in repairs aluminium dia cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.
M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed
M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and as directed.
M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed
M&L for powder coated aluminium frame for doors, windows (fixed/ sliding), ventilators with one or more rebates including joining cleat for fixing etc. including Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified and as directed.
S&F powder coated aluminium window shutters powder coating of any colour (Thickness or powder coating not less than 50 micron)., sliding type three track, two for fixing glass sections and one shutter with wire mesh aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note :- Glass and Wire cloth will be measured and paid seperately under relevant item.
S&F 12mm thick frameless toughened glass door pivot or hinge doors with double shutter complete all as specified and as directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
M&L for Sheet glass, 5.5 mm thick transparent type ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.
M&L for 18 mm thick plywood,grade BWR, type BB, with 1mm thick sunmica fixed complete all as specified and as directed.
M&L for Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F Steel work as in tubular trusses, purlin and post including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified and as directed.
S&F Pre- painted self supported galvalume aluminum zinc coating GI based corrugated steel sheet 1.00 mm thick of any colour having tensile strength of 550 Mpa as in roof coveringl, fixed all as per manufacturer instructions using required tools and plants at site complete all as specified and as directed.
M&L for applying two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.
M&L for 25 mm thick plywood, grade BWR, type BB, fixed as a fillets to receive wall panelled complete all as specified and as directed.
M & L 18 / 19 mm thick plywood, grade BWR, type BB, fixed as a wall panell over 19 mm thick plywood battens at 1.0 mtr centre to centre bothways screws to frame work complete all as specified and as directed.
M&L for 1.0 mm thick decorative laminate sheet type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and as directed.
M&L for corner wooden beading with polishing of standard hard board, size of 20 mm x20 mm, and fixing with screws etc complete all as specified and as directed.
Supply and fix in repairs vitreous china ware wash hand basin 550 mm x 400 mm size flat back or angle including new bracket and making good all connections i complete all as specified and as directed.
Supply and fix in repairs vitreous china Wash Basin, White, Glossy Finishing including all fittings with new brackets and making good all connections complete all as specified and as directed. Make :- Jaquar Model No LYS - WHT 38801 of Size 590 mm x 490 mm x 185 mm
S&F Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed. (NOTE :- Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F Vitreous China Concealed Urinals complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed. Make : - Jaquar Model No URS - WHT - 13253N Size 385 mm x 325 mm x 635 mm (NOTE :- Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F 32 mm Dia PVC waste pipe for sinks or wash basines etc . in repairs complete all as specified and as directed.
Supply and fix in repairs 32 mm dia waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and as directed.
S&F Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm dia and fixed complete all as specified and as directed.
S&F Bib taps, Faucet (Wall Mount Installation Type) chromium plated, fancy type 15 mm dia and fixed complete all as specified and as directed. Make :- Parryware Cat No G4704A1 or equivalent approved make of Jaquar / Soma / Leader / Seiko /Marc
S&F in repairs 15 mm dia angle valves, cast copper alloy, chromium plated crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
Supply and fix in repairs15 mm bore LDPE pipe 45 cm long with brass nuts and washers on both ends all as complete all as specified and as directed.
S&F unplasticiscd PVC pipes of pressure rating 10 kgf / Sqcm laid in trenches complete all as specified and as directed.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Supply and fix Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, fancy type with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply and fix Pillar taps 15 mm dia, chromium plated, single lever extended basin mixer 450 mm long braided hoses screwed down high pressure, fancy type with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make :- Jaquar Model No FON 40052B
Supply and fix in repairs vitreous china wash down water closet pan (Pedestal type), Indo- western white including removing the existing one complete and making good all connections complete all as specified and as directed.
Supply and fix in repairs Single Piece EWC with UF soft close slim seat cover , hinges , dual flush cistern and fixing accessaries complete all fittings and removing the existing one complete and making good all connections complete all as specified and as directed. Make :- Jaquar Model No LYS - WHT - 38851P 180 UFSM
S&F in repairs white / black plastic seat cover solid confirming to ISI any type complete all as specified and as directed.
Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and as directed.
S&F Towel Rail 600 mm long 20 mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs complete all as specified and as directed.
S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) and fixed in repairs complete all as specified and as directed.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed in repairs complete all as specified and as directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) and fixed in repairs complete all as specified and as directed.
S&F Sheet glass assembely consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long above WHB complete all as specified and as directed.
S&F brass chromium plated hand shower health faucet ABS body 15 mm dia fitted to GI pipe with 8 mm dia , 1.5 mtr long spirochrome flexible pipe and wall hook complete all as specified and as directed. Make :- Jaquar Model No ALD- 587
S&F stop valve Single Lever Exposed Parts Kit of Deusch Mixer Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), (Compatible with ALD-227 & ALD-229) complete all as specified and as directed. Make :- Jaquar Model No FON- 40227K
S&F bib cock with wall flange fixed to GI pipe complete all as specified and as directed. Make :- Jaquar Model No FON- 40037
S&F for 15 mm dia Two way bib tap chromium plated fancy type fixed to GI pipe complete all as specified and as directed.
Taking up or down steel tubing and connections 15 mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to store complete all as specified and as directed.
Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Description all as per Ser item No 109 above but 20 mm dia complete all as specified and as directed.
Fixing Only 15 mm bore old steel water tubing obtained from dismantling with all fittings such as bends, tee, nipples, elbow, reducers, etc fixed to walls and ceilings or laid in floors complete all as specified and as directed.
Description all as per Ser item No 111 above here-in-before but 20 mm bore of pipe complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6, type C-1 mix (using40 mm graded stone aggregate) for plinth protection and path , finished even and fair without using extra cement complete all as specified and as directed
M&L 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and as directed.
Dismantling ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and as directed.
M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mtr length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40 mm long complete all as specified and as directed.
S&F for fixing 12 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with sunk or raised moulding or over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and as directed. (NOTE :- Fillets, metal frame work and G.I. wire mesh paid separately)
M&L for preparation of new plastered / ceiling surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters ,walk ways,railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Fixing Only aluminium window / partitation frame / guard bars etc from materials obtained by dismantaling of old aluminum window complete all as specified and as directed. (NOTE :- item obtaind from item No 47 above)
M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finishes etc complete all as specified and as directed. .
M&L for Colour Rubber moulded Chequred cement concrete tiles 80 mm thick with grey cement with pigment set ionted and pointed in neat cement slurry colour to match in floors complete all as specified and as directed.
SCHEDULE 'A' PART -II (E&M PORTION) :- Taking down carefully copper/ aluminium point wiring (light, fan,socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn thorough and including non metallic med grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sqmm PVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches / sockets/ regulators etc.complete all as specified and as directed for the following :-
(a) One light point controlled by one way switch.
(b) One ceiling fan/ exhaust fan point controlled by one way switch.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches.
(d) One 3 pin 5 Amps socket outlet the switch board of light point ini the same vertical plane.
(e) One 3 pin socket outlet 5 Amps on the Independent board.
(f) One bell/ buzzer point controlled by one push button independent.
Description all as per item No 123 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.
Supply and fixing LED light fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S & F LED light fitting 1 x 9W / 1X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35 / 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fixing lamp holder with red / green LED bulb 3 W complete all as specified and as directed.
Supply and fixing lamp holder with LED bulb 5 W in ' T ' shape suitable for mirror complete all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including mounting bracket made of GI pipe 32mm dia light grade of minimum length 60 cm complete all as specified and as directed.
Taking down unserviceable sub main wiring of any description and M&L for sub main wiring with 2x4.0 Sq mm and 1x4 Sqmm(Earth), FRLS PVC insulated, unsheathed, multi-stranded, 1100 volts grade copper conductor calbe, single core, drawn through and including PVC conduit of suitable size (concealed) complete all as specified and as directed. Note :- Three runs 4 Sq mm copper cable and one run of suitable dia of PVC conduit shall be measured as one unit length. Cost of cutting chases into exist brick wall and concealing PVC conduit and making good is deemed to be included in quoted rate.
Description all as per Ser item No. 134 here-in-before but with 2 x 6.0 Sq mm and 1x6 Sqmm (Earth) complete all as specified and as directed. . Note :- Three runs 6 Sq mm copper cable and one run of suitable dia of PVC conduit shall be measured as one unit length. Cost of cutting chases into exist brick wall and concealing PVC conduit and making good is deemed to be included in quoted rate.
Description all as per Ser item No. 134 here-in-before but with 4x6.0 Sq mm (3Ph+1N) + 2x 6 Sq mm (Earth) complete all as specified and as directed. Note : - Six runs 6 Sq mm copper cable and one run of suitable dia of PVC conduit shall be measured as one unit length. Cost of cutting chases into exist brick wall and concealing PVC conduit and making good is deemed to be included in quoted rate.
Description all as per Ser item No. 134 here-in-before but with 4 x 10.0 Sq mm (3Ph+1N) + 2x10 Sq mm (Earth) complete all as specified and as directed. Note :- Six runs 10 Sq mm copper cable and one run of suitable dia of PVC conduit shall be measured as one unit length. Cost of cutting chases into exist brick wall and concealing PVC conduit and making good is deemed to be included in quoted rate.
Supply and fix Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed.
Supply and fix Switch socket combination 2 in 1, 5 Amps flush type complete all as specified and as directed.
Supply and fix Switch socket combination, 3 pin, 5 and 15A, 5 IN 1 flush type complete all as specified and as directed.
Supply and fix Switch bell push 5 Amps flush type complete all as specified and as directed.
Supply and Fixing Stepped type electronic fan regulator flush type complete all as specified and as directed.
Supply and fixing Ceiling rose PVC/ Polycorbonate insulated body with three terminals complete all as specified and as directed.
Supply and fix bell, Ding Dong AC, 230 volts, SP (Single Pole) complete all as specified and as directed.
M&L for Taking down ceiling / exhaust fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying and writing MES No including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan complete all as specified and as directed.
Supply and fix in repair distribution board 415V IP 43 protection TPN double door 4 way when incomer and outgoings are MCB's complete all as specified and as directed. Note :- DB shall be concealed in exist Brick wall and making good
Supply and fix in repair distribution board 415V IP 43 protection TPN double door 8 way when incomer and outgoings are MCB's complete all as specified and as directed. Note :- DB shall be concealed in exist Brick wall and making good
Supply and fix in repair distribution board 240V IP 43 protection SPN double door 4 way when incomer and outgoings are MCB's complete all as specified and as directed. Note : - DB shall be concealed in exist Brick wall and making good
Supply and fix in repairs Single pole & Neutral Metal clad enclosure with a two pin and earth plug and socket including one single pole MCB of 20 amps complete all as specified and as directed.
Supply & fix in repairs MCBs suitable for fixing in MCB DB's 'C' series complete all as specified and as directed for the following capacities:-
MCB FP 50 Amps, 10 KA.
MCB FP 32 Amps , 10 KA.
MCB DP 6-32 Amps, 230 volts
MCB SP 6-32 Amps , 230 volts.
M&L in repair for earthing complete with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 25x4 mm galvanized iron strip as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 40mm dia med. gr. GI pipe for protection of galvanized iron strip in the ground, including excavation, earth work, Charcoal & Salt all as specified, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I, complete including old U/S earth pit all as specified and as directed. NOTE :- (a) GI Pipe for protection of earthing strip and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items.
Taking down the AC, carefully the indoor and outdoor units along with voltage stablizer of split type air conditioner of capacity upto 2.0 TR by disconnecting all electrical connections, suction and discharge lines from its installed position and refixing, making hole into brick/stone wall & filling back with white cement where directed and installing the indoor and outdoor units alongwith stablizer at specified location and connecting all the electrical, suction and discharge lines, including M&L for topping up the refrgerant gas as required and testing on completion for proper functioning complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm or nearest size complete all as specified and as directed.
K LAKSHMAN SINGH AND CO
M/S P.SWAROOP KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .