Replacement of Wornout conductor and rotten poles under UT capex 2022-23

Amount

Supply ,Installation,testing & Commissioning (SITC) of 09 Mtr. Long Poles (ST-410 SP33) along with carriage to site and Loading/Unloading including ,Supply & Painting of Poles Red Oxide and aluminium paint(2-coats each),Earthing Complete by GI rod 20 mm 3 mtr long through GI Strip 25x3 mm as per REC Standard,Cement bottoming of poles 1:2:4 mix as per REC standards 0.5cum /pole & Providing & Fixing of Danger Plates (Glazed Type) with Clamps and anticlimbing devices.

Installation Testing and commissioning (ITC) of 09 Mtr. Long Poles (ST-410 SP33) along with carriage to site and Loading/Unloading including Supply & Painting of Poles with Red Oxide and aluminium paint(2-coats each),Earthing Complete by GI rod 20 mm 3 mtr long through GI Strip 25x3 mm as per REC Standard,Cement bottoming of poles 1:2:4 mix as per REC standards 0.5cum /pole & Providing & Fixing of Danger Plates (Glazed Type) with Clamps and anticlimbing devices .

Supply ,Installation,testing & Commissioning (SITC) of 08 Mtr. Long Poles (ST-410 SP15) along with carriage to site and Loading/Unloading including ,Supply & Painting of Poles Red Oxide and aluminium paint(2-coats each),Earthing Complete by GI rod 20 mm 3 mtr long through GI Strip 25x3 mm as per REC Standard,Cement bottoming of poles 1:2:4 mix as per REC standards 0.45cum /pole .

SITC of ACSR 50 sq. mm. Conductor including carriage to site and loading/unloading including site clearance along with providing & fixing of Aluminium jointing sleeves at joints.

SITC of G.I Channel/Angle/Flat iron for V-cross,braces of sizes including clamps and GI Nut Bolts

SITC LT Shackles(90X75mm) along with muckhi clamps of G.I flat iron 50X8mm with requirred nut/bolts & washers.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

computerized site plan of work's depicting complete details of works along with land marks on 12X18 inch good quality paper sheet

identification of assets by way of marking of ST poles with Black paint at a height of 2.4 meters from ground level with clear mentioning of name of scheme ,implementation agency (JKPDD),year of work (2022-23) and pole No.

Pre ,during and post GEO tagged photographs of size not less than 8x6 inches on good quality photopaper .

Dismantling of Rotten poles and returning back to divisional stores along with allied material

Dismantling of Wornout conductor and returning back to divisional stores

FAYAZ AHMAD DAR

M/S UNIQUE ELECTRICALS

GH RASOOL WANI