Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC 0001D ATM HOUSE AIR FORCE NEENA THAPA GORAKHPUR UTTAR PRADESH 273008 UDYAM UP 32 0054752 | GORAKHPUR | UTTAR PRADESH | 273008 | ₹41.4 L Quoted ₹43.8 L | L1 | Accepted-AOC Admitted being L1 |
| 2 | L2₹46.7 L+₹2.9 L (6.51%)Rejected-Finance FLAT NO 201 GREEN VALLEY CHS PLOT NO 26 SECTOR 19 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | ₹46.7 L+₹2.9 L (6.51%) | L2 | Rejected-Finance Not admitted being L2 |
| 3 | L3₹47.2 L+₹3.4 L (7.76%)Rejected-Finance 1501 BHAGWATI EMINENCE SAVITRIBAI PHULE MARG BESIDES R R PATIL GARDEN SECTION 13 NERUL E NAVI MUMBAI | RAIGAD | MAHARASHTRA | 400702 | ₹47.2 L+₹3.4 L (7.76%) | L3 | Rejected-Finance Not admitted being L3 |
| 4 | L4₹48.1 L+₹4.3 L (9.76%)Rejected-Finance SHOP NO 106 1ST FLOOR ASHOKA SHOPPING CENTRE LT ROAD MUMBAI 400001 | MUMBAI | MUMBAI | MAHARASHTRA | 400001 | ₹48.1 L+₹4.3 L (9.76%) | L4 | Rejected-Finance Not admitted being L4 |
| 5 | L5₹49.8 L+₹6.0 L (13.7%)Rejected-Finance | ₹49.8 L+₹6.0 L (13.7%) | L5 | Rejected-Finance Not admitted being L5 |
| Sl No | Description | Qty | Unit | pk Enterprises L4 | Nexus Infratech L6 | M.K Enterprises L2 | SREE HARITHA ASSOCIATES L3 | Om Sai Enterprises L1 | BALAJI TRADERS L7 | M/S Royal Enterprises L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting and dismantling of unserviceable centrifugal pump set 150 HP of Kirloskar make Model No DSM 150-46, from pre-existing foundation complete with inlet/ outlet attachment and transporting to authorised dealer/ reputed workshop and reassembling complete unit after replacement of defective spares including machining of shaft as desired / required to ensure proper alignment with provisioning of commissioning / testing of pump set to the entire satisfaction of Engr in charge.
Note :- (i). Any adjustment in the pump set if required, the same shall also be carried out by the contractor without any extra payment.
(ii). Any damage to the pump set occurs due to improper installation of motor, the contractor shall be liable for repair at his own cost. | 3 | Each Job | 25,713 ₹77,139 | 27,310 ₹81,930 | 24,669 ₹74,007 | 25,000 ₹75,000 | 18,000 ₹54,000 Lowest | 30,500 ₹91,500 | 26,607 ₹79,821 |
| 2.00 | Supply only following spare parts suitable for centrifugal pumps set of Kirloskar make to incorporate in item No. 1 above, complete all as directed by Engr-in-Charge :-
(a) CI impellor suitable for 150 HP capacity | 4 | Each | 30,000 ₹1,20,000 | 30,777 ₹1,23,108 | 29,669 ₹1,18,676 | 29,723 ₹1,18,892 | 9,000 ₹36,000 Lowest | 31,200 ₹1,24,800 | 31,631 ₹1,26,524 |
| 2.01 | (b) Pump shaft suitable for 150 HP capacity | 2 | Each | 14,441 ₹28,882 | 16,731 ₹33,462 | 12,869 ₹25,738 | 13,800 ₹27,600 | 9,500 ₹19,000 Lowest | 17,800 ₹35,600 | 15,427 ₹30,854 |
| 2.02 | (c) Adjustable washer suitable for 150 HP capacity | 4 | Each | 637 ₹2,548 | 647 ₹2,588 | 629 ₹2,516 | 633 ₹2,532 | 600 ₹2,400 Lowest | 658 ₹2,632 | 643 ₹2,572 |
| 2.03 | (d) Oil seal (DE & NDE) suitable for 150 HP capacity | 4 | Each | 917 ₹3,668 | 927 ₹3,708 | 909 ₹3,636 | 913 ₹3,652 | 750 ₹3,000 Lowest | 940 ₹3,760 | 923 ₹3,692 |
| 2.04 | (e) ‘O’ ring suitable for 150 HP capacity | 4 | Each | 983 ₹3,932 | 993 ₹3,972 | 979 ₹3,916 | 981 ₹3,924 | 450 ₹1,800 Lowest | 1,035 ₹4,140 | 991 ₹3,964 |
| 2.05 | (f) Distance sleeve suitable for 150 HP capacity | 2 | Each | 3,310 ₹6,620 | 3,400 ₹6,800 | 3,259 ₹6,518 | 3,281 ₹6,562 | 2,900 ₹5,800 Lowest | 3,545 ₹7,090 | 3,383 ₹6,766 |
| 2.06 | (g) Key for impellor and coupling suitable for 150 HP capacity | 4 | Each | 1,010 ₹4,040 | 1,120 ₹4,480 | 989 ₹3,956 | 993 ₹3,972 | 950 ₹3,800 Lowest | 1,220 ₹4,880 | 1,077 ₹4,308 |
| 2.07 | (h) Bearing lock nut suitable for 150 HP capacity | 2 | Each | 967 ₹1,934 | 977 ₹1,954 | 959 ₹1,918 | 963 ₹1,926 | 550 ₹1,100 Lowest | 990 ₹1,980 | 973 ₹1,946 |
| 2.08 | (j) Shaft sleeve/bush | 6 | Each | 4,200 ₹25,200 | 4,300 ₹25,800 | 4,139 ₹24,834 | 4,173 ₹25,038 | 2,100 ₹12,600 Lowest | 4,480 ₹26,880 | 4,273 ₹25,638 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
13 Jun 2026, 6:00 pmClosed
GE NW KARANJA
NAVAL STATION KARANJA, URAN, RAIGAD, MAHARASHTRA
REPAIR / MAINTENANCE AND REPLACEMENT OF DEFECTIVE PARTS OF WATER SUPPLY PUMP/ MOTOR SET SUBMERSIBLE MOTOR AND PUMP SETS BORE WELL / DUG WELL PUMPS REWINDING TO PUMP MOTOR PAINTING WORKS INCLUDING CLEANING OF UNDER GROUND SUMP UG SUMPS AND ALLIED
2026_MES_767316_1
8327/E8
Open Tender
Civil Works
Item Rate
180 days
GE NW KARANJA
Class D and above and category a (ii)
8 documents required · 8 mandatory
₹500
Yes
GE NW KARANJA
₹98,000
Yes
14 Aug 2026
23 May 2026
15 Jun 2026
23 May 2026
13 Jun 2026
6 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Disconnecting and dismantling of unserviceable centrifugal pump set 150 HP of Kirloskar make Model No DSM 150-46, from pre-existing foundation complete with inlet/ outlet attachment and transporting to authorised dealer/ reputed workshop and reassembling complete unit after replacement of defective spares including machining of shaft as desired / required to ensure proper alignment with provisioning of commissioning / testing of pump set to the entire satisfaction of Engr in charge.
Note :- (i). Any adjustment in the pump set if required, the same shall also be carried out by the contractor without any extra payment.
(ii). Any damage to the pump set occurs due to improper installation of motor, the contractor shall be liable for repair at his own cost. | 3 | Each Job | - | - |
| - | Supply only following spare parts suitable for centrifugal pumps set of Kirloskar make to incorporate in item No. 1 above, complete all as directed by Engr-in-Charge :-
(a) CI impellor suitable for 150 HP capacity | 4 | Each | - | - |
| 2.01 | (b) Pump shaft suitable for 150 HP capacity | 2 | Each | - | - |
| 2.02 | (c) Adjustable washer suitable for 150 HP capacity | 4 | Each | - | - |
| 2.03 | (d) Oil seal (DE & NDE) suitable for 150 HP capacity | 4 | Each | - | - |
| 2.04 | (e) ‘O’ ring suitable for 150 HP capacity | 4 | Each | - | - |
| 2.05 | (f) Distance sleeve suitable for 150 HP capacity | 2 | Each | - | - |
| 2.06 | (g) Key for impellor and coupling suitable for 150 HP capacity | 4 | Each | - | - |
| 2.07 | (h) Bearing lock nut suitable for 150 HP capacity | 2 | Each | - | - |
| 2.08 | (j) Shaft sleeve/bush | 6 | Each | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
8327TenderDocs.pdf
Tender Documents • 1.10 MB
BOQ_859335.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .