REPAIR TO DOOR GATE ROOF TREATMENT ROOF SHEETING,DAMPNESS AND OTHER CONNECTED ITEMS AT 21 SIGNAL GP AND ENTITY B 61 WEU AREA AND CLEANING AND REPAIR OF SEWAGE LINE MANHOLES DRAIN FENCING PATH ETC AT 21 SIGNAL GP UNDER AGE B R II OF GE NORTH DELHI

Amount

SCH 'A' PART-I Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

Dismantling framed work timber scantling 40 sq cm and over in section and in any position complete all as specified.

Dismantling Wall & ceiling boards any thickness, including cover fillets etc.

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing to store complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n.exc 4 sqm each and removing to store complete all as specified.

Taking down shutters exc 1sqm but not exc 2 sqm each all as directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred.

M & L 4 mm thick size non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminium frame work with screws complete all as per manufacturers instructions and as directed.

S&F GI powder coated frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L Roughening surfaces of old concrete surfaces by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 Kg/Sqm complete all as specified and directed.

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 15mm thick screed bed in CM 1:4 mixed with water proofing compound as per manufacture instruction on existing surfaces. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.40 Kg/Sqm of area complete all as specified. (c) Laying 3mm th APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.6 Kg/Sqm with laps & overlaps as specified & joints sealed by torch application method over a layer of 85/25 bitumen @ 1.20 Kg/Sqm complete all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge

Dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed.

M&L for light shade vitrified tiles 10mm thick in floors etc, area of each tile not exc 0.36sqm, set and jointed in neat cement slurry and pointed with white or coloured cement with pigment to match the shade of tile, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

All as per ser Item No-16 here -in-before but on vertical surface as in dados/ skirting over 10mm thick rendering as backing coat in CM 1:4 complete including dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles 300mm x 200 mm x 7mm to 8 mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm and not exc 0.18Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match, over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L in repair for machine cut kota stone slab flooring 18-to -20 mm thick over and including bedding layer 20 mm thick in cement mortar 1:6, pointed & jointed in neat cement slurry mixed with pigment to match the shade of the slab including grinding and polishging etc complete as directed and specified.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 40 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in floors finished even and smooth using extra cement all as specified.

Supply only glass diving strips 3 mm thick and 38mm width inserted in position, confirm to design.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified

M & L machine pressed precast colour concrete interlocking paver block any shape and sizewith grey cement and pigment confirming to IS 15658-2006 of 60mm thickness,M-35 grade.

M & L sand filling under floors including watering and consolidation complete all as specified

M&L for plain cement concrete 1:3:6 type C-1 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment , and the like, finish the surfaces even and fair without using extra cement all as directed and specified

M & L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent etc.complete and applying two coats of oil bound distemper on wall complete all as specified and directed.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc.completeall as specified

M&L for 15 mm thick rendering on brick or stone walls other than fair face in cement mortar 1:6 finished even and fair complete all as specified

M&L for prepartion of newly plastered surface of wall and applying 3 mm thick wall care putty two or more coat to get eeven and smooth surface (Birla white or equivalent) and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed..

M&L three coats of white wash on newly plastered surfaces of wall including preparation, complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying two coat of white wash on walls complete all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick cement plastering over brick wall in cement mortar 1:4 finished even and smooth all as specified and directed

M/L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying two coats of cement base paint on external wall surface complete all as specified and directed.

S & F for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed baluster; walk ways; railings; framework of watertanks and similar work confirming to Fe-290. Gde-E-165

S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F for 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing wire cloth etc,sizes of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a) complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F steel windows with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing/gauging bars, dovetailed or welded.complete all as specified.

S&F MS bars as in window guard bars welded to steel window frame or fixed to wooden frame all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

S&F Solid PVC factory made door frame of size 50x47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F for 200mm long aluminium anodised, barrel tower bolt , extruded section complete all as specified.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F for 150mm size extruded aluminium handle, fabricated type, anodised complete all as specified and directed.

S& F 250 mm long Aluminium alloy, anodised , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones

M&L brass coated aluminium decorative curtain rod 20mm dia of make VISTA or eqv. including brackets, side knobs and fixed to wall complete all as specified and directed.

Taking up or down steel tubing 15mm bore complete all as specified and directed.

Taking up or down steel tubing 20mm bore complete all as specified and directed.

S&F in repairs 15mm bore tubes medium grade galvanized with all fittings andfixed complete to walls and ceilings or laid in floors including taking down all as specified.

S&F in 20 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors including taking down all as specified.

S&F fancy type chromium plated two way bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as specified & directed.cat part no. CON-041 KN).or Prayag Cat Part No - 9312.

S&F 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, complete all as specified and directed.

S&F In repair angle valve cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S & F in repairs CP hygienic spray (2 in 1 facucet with 1.5M long tube) complete all as specified.

S & F in repair CP toilet paper holder complete all as specified.

S&F in repair CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge (AKP-35731P) or Prayag Cat Part No BA - 25.

S& F 15 mm dia CP Central hole basin Mixture swivel type for mixing hot and cold water with regular spout without pop up waste system with 450mm long braided Hoses (Cat Part No : CON-167KNB)

S & F in repairs CP wall mixer fancy type all as specified. (Cat part no : FLR-5281 N)

S&F in repair 20mm dia brass CP Tubular towel rail , D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed.

M & L in repair 32mm bore brass CP bottle traps for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap. all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white(including fixing bolts, flushing cistern & flush pipe) all as spd and dir.

Supply only PVC low level flushing cistern valveless, 10 ltr capacity syphonic action type with inlet ball valve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in 75mm bore Cast iron soil,waste and vent pipes sand cast, in any length with or without ears, with cement joints,laid in trenches or in floors complete and including dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 75mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) and fitted with oval access door complete all as specified and directed.

S&F in 100 mm bore Cast iron soil,waste and vent pipes sand cast, in any length with or without ears, with cement joints,laid in trenches or in floors complete complete all as specified and directed.

S&F 100mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

M & L in repair 75 mm CI floor traps including joint to waste pipe fixed in cement concrete B1 ( 1:2:4) complete all as specified and directed.

Dismantling water tanks exc. 250 ltr & n.exc 500 ltr and removing complete all as specified and directed

Dismantling water tanks exc 500 ltr & n.exc 1000 ltr and removing complete all as specified and directed

S&F rotational moulded polythene water storage tanks, multi-layered, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20mm bore PTMT high pressure rate float valve with aluminium rod and ball screwed for iron pipe complete all as specified and directed.

All as per Srl Item No 83 above but capacity of tank 500 ltrs.

S & F 20mm bore PTMT high pressure rate float valve with aluminium rod and ball screwed for iron pipe complete all as specified and directed.

Disconnecting existing tanks exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Disconnecting existing tanks exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 250 to 500 ltrs capacity of tanks, complete all as specified and directed. (Up to four Storey)

All as per Srl Item No 88 above but exc 500 ltrs and not exc 1000 ltrs.

SCH 'A' PART-II Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC pipes all types top to bottom including junctions etc, cleaning of sewage line upto GT complete all as specified and as directed.

Cleaning of manhole up to 1.00 meter depth any size of manhole and taking out sludge and depositing the same in notified area by Municipal Corp of Delhi for dumping or out side Defence land complete all as specified and as directed.

Cleaning of manhole depth exc1.00 meter and n exc 2.00 meter of any size of manhole and taking out sludge and depositing the same in notified area by Municipal Corp of Delhi for dumping or out side Defence land complete all as specified and as directed.

Cleaning of sewage line from GT to Ist manhole complete all as specified and as directed. Note:-Cleaning of sewage line of daimeter upto 100mm to 150mm

Cleaning of sewage line 100 mm dia from manhole to man hole by manual/ mechanicalrooding removing all sludge/waste aqnd making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Cleaning of sewage line 150 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Cleaning of sewage line 200 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Cleaning of sewage line 300 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specified and as directed.

Dewatering/desludging of septic tanks, soakage wells etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical scrappers etc and burried off the same out side the defence area notified by Municipal Corporation of Delhi all as specified and as directed by Engr-in-Charge.

Cleaning of sewage line, man holes exc 1.25 m depth and septic tank etc using mechanically oprated Hydraulic pressure machine equpied with jet and suction pressure cleaning all as specified and directed.(08 working hours for one job). Note work will be executed in foul condition

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with clamps etc including taking out/dismantling of old pipes complete all as specified.

All as per item No 99 above but bore of pipe in 110 mm.

S&F in repair PVC (SWR) bends any radius bore 75 mm

All as per item No.101 above but bore of pipe in 110 mm.

S&F in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, fixed to walls with clamps etc, bore of pipe 75mm complete all as specified and directed.

S&F in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, fixed to walls with clamps etc, bore of pipe 100mm complete all as specified and directed.

S&F 75mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors as in door 'T', door bends, 'Y' section complete all as specified and directed.

S&F 100mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors as in door 'T', door bends, 'Y' section complete all as specified and directed.

S & F in repair for precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mmx500mmx 80mm complete all as specified and as directed.

S & F in repair precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mm x1000mmx80mm omplete all as specified and as directed.

Excavation in any type of soil in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out complete all as specified and as directed.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and as directed.

Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil omplete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia SGSW / RCCpipes after they are laid and tested including demolition of old bed and pipes omplete all as specified and as directed. (thickness of concrete bed 100mm).

All as per ser item No above here-in-before but for 200 mm internal dia SGSW/RCC pipes (thickness of concrete bed 150mm).

Supply and laying, jointing 150mm internal dia of salt glazed stoneware pipes grade 'A' incl testing and laid in trenches to a level on concrete bed complete all as specified.

All as per item No.37 here-in-before but 200mm internal dia of salt glazed stoneware pipes grade 'A' .

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150/200mm dia pipes omplete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for all as specified.

S & F for precast reinforced cement concrete Manhole covers in 1:2:4 using 20 mmgraded stone agg and set in CM 1:4 all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10 to 12mm dia and over, cut to length, bent to shape required including cranking bending, spirally for hooping end and binding with and incl mild steel wire (annealed) not less than .9mm dia or securing with clips quality confirming Fe 410S or Fe-410O

Vitreous china squattting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests including CI 'P' or 'S' trap excluding flushing cistern but including connection to trap, anti syphonage pipe etc. complete, fixed in repairs all as specified.

M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

M/L for providing precast reinforced cement concrete type B0, 1:2:4 using 12.5mm graded aggregate as in jallies 45mm thick (measured solid) set in cement mortar 1:4, cemplete all as directed and specified

Supply only Liquid water proofing compound and SBR of FOSROC as per manufactrurs instruction complete all as directed and specified.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated surfaces of any description and applying one coats of cement base paint on external wall surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L Chequered cement concrete tiles 200x200mm by 25 mm thick, with grey cement and no pigments incl over 15 mm thick screed bed in CM 1:6, jointed and pointed in neat cement slurry in floors.

M&L in repair for Ultra design coloured tiles with PU coating of size 300x300x25 mm thick rubber moulded with white cement, as in floors incl over 15 mm thick screed bed in CM 1:6 jointed and pointed in neat cement slurry all as directed.

Dismantling fencing wire mesh, any type as per site all as directed.

S&F galvanised 2 starand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provn of galvanised mild steel wire staples or steel pins etc as dirrected.

S&F in repair for framed work such as fencing posts, supporting flat iron strips, nut bolts, gates etc complete all as specified and directed.

Supply only chain link MS galavnised any size and type complete all as specified and directed

Fixing only chain link fencing incl line wires any mesh size & type to any type of standards rails straining bolts etc. incl provision of bindig wire.

S&F screw bolts (machine made) with hexagonal or squre heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts not exc 5cm and dia of shank 10 mm.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs. 45309.00

The new hut furnitures

AAYUSHI ENTERPRISES

V M CONSTRUCTION