Provision of Electrical Installation and IT work at North side Hall of 12th floor in Sanchar Bhawan, New Delhi.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supply & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

Supplying and drawing 4 Pair 0.5 mm dia. FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply & fixing of following conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

20 mm medium class PVC conduit

25 mm medium class PVC conduit

Supply & fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Blanking Plate

Supply & fixing suitable size GI box with modular plate and cover in front on surface or in recess etc. as required.

3 Module (100mmX75mm)

12 Module (200mmX150mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

3 Module

4 Module

6 Module

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

2 run of cable

3 run of cable

Supplying and fixing of 100mm x 50 mm size raceway made of 1.6mm GI sheet for wiring/cable drawing including accessories /fittings in floor, making good the damages if any complete as required.

Supplying and fixing of following PVC Box on surface or in recess etc. complete as required.

12 module

8 module

6 module

4 module

3 module

1/2 module

Supplying and fixing of following Equipments/accessories for local area networking of computers through database servers etc. as reqd.

CAT 6 information outlet plate

Patch cord Cat 6 (1m)

RJ 45 connector

Supply & laying of following sizes PVC insulated, PVC sheathed flexible unarmoured, copper conductor power cable of 1.1 kV grade complete as required.

3 x 2.5 sq. mm

3 x 4 sq. mm

Installation, testing and commissioning of 400 mm sweep, 1350 rpm, Plastic body wall fan, complete with all accessories etc. directly on wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying, Installation, Testing & Commissioning of Energy Efficient Ultra modern of about 600mm x 600mm size LED luminaire having the following specifications i/c high brightness SMD LEDs as light source, making suitable arrangement for installation, connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing complete with all accessories as reqd etc. in all respect to the entire satisfaction of Engineer-in-charge:

a) Wattage : 34 Watt + 10% b) System lumens efficacy : Not less than 120 lumen per watt c) Driver efficiency : Not less than 85% d) THD : Not more than 10% e) CRI : Not less than 80 f) UGR : Less than 19% g) LED Life : Not less than 50000 hours @ LM 70% h) Colour temperature : 5500 - 6500 K i) Operating voltage range : 140 Volt to 270 Volt

j) Material of construction for housing : CRCA powder coated white after phosphochromate treatment k) Material of construction for cover : Scratch resistant and polycarbonate diffuser / cover l) Electronic Driver : independent Isolated type (Constant current supply) m) Internal surge protection : Not less than 2.5 kV n) Ingress protection (IP) : Not less than 20

Panel Recess Ceiling Installation type

Panel Slim Surface Installation type

SPECIAL CONDITIONS OF CONTRACT 1. The rates should be inclusive of all taxes. 2. Skilled manpower will be deployed by the agency at site along with required tools and plant etc. to keep all the services operational upto the required standards & to receive the complaints and for co-ordination for the work. For this, one mobile no. with whatsapp facility will be provided by the agency. 3. Adequate inventory of material will be kept at site by the agency for prompt attending the complaint. 4. Penalty of Rs. 500/- per complaint per day will be imposed for non-compliance of the complaint. If at any stage, it is observed that the performance of agency is not adequate, work will be rescinded, and the agency will be debarred from doing any work for one year in Delhi region. The work will then be carried out at his risk and cost without serving any notice 5. The Agency should quote amount keeping in view all Statutory requirements including minimum wages/ESI/EPF etc.

Note:- 1. The Agency has to submit police verification record & ID proof of each worker. 2. Prior approval of competent authority is required for deviation. 3. The GST / other Input Tax Credit (ITC) taxes shall be quoted by the firm as applicable as per latest amendments of GST Rules. 4. The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit. 5. Servicing Scrap items will be credited to the firm. The rate may be quoted accordingly. 6. Bidder must mandatorily quote for all GST components (CGST, SGST, and IGST) as required. 7. The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services. 8. In case, dealer is registered under compounding scheme or any rule/notification where the BSNL is not eligible for input tax credit then the bidder should not disclose any amount in column 7 to12 & 14.

Note: 9. % age Rate of FF & Packing should be shown of basic unit price excluding all taxes & charges (i.e. as %age of col.4). 10. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc. 11. Bidder must mandatorily mention HSN & SAC numbers. 12. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST. Declaration by Bidder 1. We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date. 2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 14 above are admissible as per GST Laws. Name of bidder: Seal of Company: GST No./(s)

PAWAN ENTERPRISES

STAR ELECTRIC WORKS

kashyap electricalsd