Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 CrAccepted-AOC 5 217 D1 TEACHERS COLONY MOHANUR ROAD NAMAKKAL 637001 | NAMAKKAL | TAMIL NADU | 637001 | ₹11.7 Cr | L1 | Accepted-AOC Lowest bidder accepted after negotiaon |
| 2 | L2₹12.0 CrRejected-AOC NO 35 DADAGAPATTY SALEM SOUTH TALUK SALEM | SALEM | SALEM | ₹12.0 Cr | L2 | Rejected-AOC Highest bidder rejected. |
Tender Value
₹11.5 Cr
EMD Value
₹11.2 L
Closing Date
24 Feb 2025, 3:00 pmClosed
Superintending Engineer
Superintending Engineer, PWD, Heritage Buildings Circle, Chennai-05.
Providing additional amenities to the newly constructed Porunai Museum Building complex at Kulavanigarpuram village in Tirunelveli District.
2025_PWD_524266_1
29/ HBC/2024-25
Open Tender
Civil Works - Buildings
270 days
Tirunelveli
Please refer Tender documents.
11 documents required · 11 mandatory
₹0
₹11.2 L
4 Jun 2025
11 Feb 2025
24 Feb 2025
11 Feb 2025
24 Feb 2025
11 Feb 2025
Amount
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
Earth work open excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
Supplying and filling in foundation, basement, etc with filling M sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification and as directed by the department officers.
Supplying and filling of well gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete complying with standard specification and as directed by the departmental officers.
Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.Including cost of chemicals labour charges,transport and storing etc complete and as directed by the departmental officers.
Cement Concrete 1:5:10 (One Cement, Five crused stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
Foundation & Basement
In Ground floor
Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation & Basement
Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 440 kg/m3 and maximum water cement ratio of 0.40, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). Foundation & Basement
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.
Brick work in following Cement Mortar 1:6(One Cement and Six M-sand)using best quality of Second Class Table Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.
Foundation and basement
Ground Floor
Brick partition walls of 11.50cm thickness using best quality II class table moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
Construction of course rubble masonry footings/ dwarf wall work in cement mortar 1:5 using best quality of granite stones including curing, scaffolding arrangement etc. complete. (as per the directions of department officials)officers. (Hoop iron reinforcement will be measured and paid for separately)
Pointing the coursed rubble masonry both sides with combination mortar 1:1:5 after racking out the joints, toning up, curing etc. Cost including all materials and labour charges etc. complete
Finishing the top of slopped roof, sun-shade with Machine Pressed Ornamental Tiles of approved quality laid in cement mortar 1:3 20mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same red oxide mixed mortar etc complete, complying with standard specifications
Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works).
Providing and Fixing the Wooden Rafter Beams of different sizes for supporting on roof Tiles and sunshade tiles. The rate inclusive of all materials, labour power and conveyance of materials 14 drawing and design by to the work site, loading & unloading etc., and as per the Departmetnal Officers and All the materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Supply and fixing Teak wood for frames 100x75mm size of door including all material and labour charges for teak wood wrought and put up in position and the size and section as per the architural drawings & Specification
Teak Wood Scantlings 2m in length
Teak Wood Scantlings 2m to 3m in length
Providing and fixing panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel Inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick: Burma teak wood Heritage style
Supply and fixing Window M.S.Grill of approved design including welding, transporatation and one coat of primer etc., complete
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of roof with one course of machine pressed tiles following size of size of approved quality set in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Plastering external surfaces with Cement Mortar 1:3 (One Cement and Three M Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
Supply and fixing II class Teak wood for frames 100x75mm size of door including all material and labour charges for teak wood wrought and put up in position and the size and section as per the architural drawings & Specification
Supplying and painting the walls with two coats of emulsion paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
Supplying and fixing approved best quality aluminium anodised towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
Supplying and laying mangalore tiles of class A of approved quality at site of work for pre measurement as directed by the dep. Officers etc., complete roofing the mangalore tiles over flat tiles in Lime mortar 1:2 and pointing with same
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
Supplying and fixing in position 15mm dia brass CP Brass BIB tap Jaquar or Equivalent (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) For toilet & Urinal
Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....
Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works
Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. Below ground level
32mm Dia
40mm Dia
Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. Above Ground level
25mm Dia
20mm Dia
15mm Dia
Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
Coupler
40mm Dia
32mm Dia
25mm Dia
20mm Dia
15mm Dia
Elbow
40mm Dia
32mm Dia
25mm Dia
20mm Dia
15mm Dia
40mm Dia
32mm Dia
25mm Dia
20mm Dia
15mm Dia
40mm Dia
32mm Dia
25mm Dia
20mm Dia
15mm Dia
Reducer
40 x 32 mm Dia
32 x 25 mm Dia
25 x 20 mm Dia
20 x 15 mm Dia
Reducer Tee
40 x 32 mm Dia
32 x 25 mm Dia
25 x 20 mm Dia
20 x 15 mm Dia
Reducer Elbow
40 x 32 mm Dia
32 x 25 mm Dia
25 x 20 mm Dia
20 x 15 mm Dia
Jet Nipple
32mm Dia
25mm Dia
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50mm thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
160mm dia PVC soil pipes
110mm dia PVC soil pipes
75mm dia PVC soil pipes
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
160mm dia PVC Elbow
160mm dia PVC Elbow with Door
160mm dia PVC Bend
160mm PVC Tee with Double Door
110mm dia PVC Elbow
110mm dia PVC Elbow with Door
110mm dia PVC Bend
110mm PVC Tee with Double Door
75 mm dia PVC Elbow
75 mm dia PVC Elbow with Door
75mm dia PVC Bend
75mm PVC Tee with Double Door
Supplying and fixing approved best quality PVC water Tank complete complying with standerd specification supplying and fixing approved best quality PVC water Tank complete complying with standerd specifications
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
Providing and Fixing of Precast terracotta balustrade spaced at 300mm c/c between 230 mm high brickwork above and below the balustrade and Plastering with Cement Mortar 1:5 (One cement and five M-sand),12mm thick top and bottom of precast jally and as per drwgs and specification, The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers and All the materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc.,complete complying with standard specification. Terracotta Jally of Size 20 x 20 x 7.50 Cm
Providing and Fixing of Precast terracotta balustrade spaced at 300mm c/c between 230 mm high brickwork above and below the balustrade and Plastering with Cement Mortar 1:5 (One cement and five M-sand),12mm thick top and bottom of precast jally and as per drwgs and specification, The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers and All the materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc.,complete complying with standard specification. Terracotta Jally of Size 20 x 20 x 5.00 Cm
provision of Cornices with moulding, decorative bands using cement mortar (1:3 Cement Mortar and finishing it with fine mortar using brick masonry set in 1:0.5: 3 Cement mortar, plastered with 1:3 CM finished with 1:2 fine ground CM) including inserting brick pieces, onveyance of all materials and all labour charges,curing etc., complete complying with standard specifications.
Supplying and fixing in position of aluminium handrails anodised matt natural finish c type section of size 70x30x3 mm thick at 1.527 kg/m with all alu. Strip section No.5126 of 37 mm with 0.227 kg/m inclulding balustrades square section of size 25.40x25.40x1.50mm thick at 0.442 kg/m to a height 800mm from the finish floor level at step nesing fixed at 150mm intervals iln the two numbers for each step with necessary screws plugs etc. including providing holes iln the RCC masonry steps landing or floor and also fixing the aluminium depth and grouted with cement and redoing the damaged portion as original condition.
Supplying and fixing of Eaves Board of 250mm width and 20mm thick made up of TW planks with required design including cost of labour and material etc.,complete complying with standard specification.
Supply and fixing Granite Cut stone column, Beam,hooks and columns base of heritage type of design and dimensions etc.,complete complying with standard specification and as directed by the deparmental officers.
Rough stone dry backing for Revetment and water channel bed using New hard stones obtained from approved sources including the cost of new wedges for filling the gaps etc. and complete of the works.
Supplying and fixing best approved best quality stainless steel Health Faucet with Stop coak of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
Supplying and fixing 2hp jet motor with all accessories inclding giving neccesery electrical connetion and as directed by the deportmental officers
Supplying and fixing wall mounting with panelboard at suitable DOL type push botton , automatic starter etc., complete
Paving the floor with best approved quality fine polished shahabad stone slabs of size 20mm with machine cut edges of size 2' x 2' and above and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Supplying, erecting and fixing Granite Stone bench with back rest. Bench shall consisit of 2 Nos of "L" shaped base support and 2 Nos of Grnite Stone slabs for seat and back rest of approved size and shape. Complete complying with standard Specification and as per the directions of the departmental officers.
Trenching in ordinary soil upto a depth of 60 cm (shrubs pit size 60 cm diameter, 60 cm depth, ground cover 40 cm diameter & 30 cm depth) including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling wihtin a lead of 50m and making up the trenched area to proper levels by filling with earth (red soil)( mixed with manure before and after flodding trencyh with water (excluding cost of red soil, manure)
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with maure or sludge in the ratio of 2:1 by volume ( 2 parts of stacked volume of earth after reduction by 20%: 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with a all leads and lifts (cost of manure, extra good earth (red soil) if need to be paid for separately). For tree pits of holes 1.2m dia and 1.2m deep
Supplyting and stacking of good earth (red soil) for all plant pits, at site including royalty and carriage upto 5 km. complete
Supplying and stacking at site dump manure from approved source, including carriage upto 5km complete, secreened through sieve of IS designation 20mm
Trenching in ordinary soil upto a depth of 60 cm for hardscape paving incluidng removing and stacking of serviceable materials and then disposing of surplus soil by spreading and neatly leveling within a lead of 50 m and making up the renched area to proper levels by filing wiht earth or sludge before and after flooding trench with water
Planting (Trees and Palms) (Providing . Supply and stacking at site as per direction of officer incharge)
Cassia fistula (Amaltash) of height 120-135 cm. with 3-4 branches and thick stem in big size HDPE bags (CF)
Peltophorum pterocarpum of plants height 150-165 cm. with 304 branches and thick stem in big size HDPE bags (PT)
Plumeria acutifolia of plants height 150-165 cm with 3-4 branches and thick stem in big size HDPE bags (PA)
Terminalia chebula of plants height 150-165cm with 3-4 branches and thick stem in big size HDPE bags.
Manilkara zapota of plants height 105-120 cm with 3-04 branches and thick stem in big size HDPE bags
Spathodea companilata of plants height 150-165 cm with 3 -4 branches and thick stem in big size HDPE bags (SCO)
Lagerstroemia speciosa of palnts height 150-165 cm with 3-4 branches and thick stem in big size HDPE bags (LS)
Areca palm plant, having ht. 1.80m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthern pot / plastic pot (ACP)
Caryota urens (Fishtail palm) ht. 270-300 cm bottom girth 40-50 cm well developed in big size HDPE bag (CU)
Thespesia populnea of plants height 165-180 cm with 30-4 branches and hick stem in big size HDPE bags (TPO)
Mangifera Indica of plants height 165-180cm with 30-4 branches and thick stem in big size HDPE bags
Artocarus heterophyllus of plants height 150-165 cm with 3-4 branches and thick stem in big size HDPE bags
Phoenix dactylifera ht. 165-180 cm bottom girth 40-50 cm well developed in big size HDPE bag
Areca catechu ht 165-10 cm bottom girth 40-50 cm w2ell developed in big size HDPE bag
Cocos nucifera ht 165-10 cm bottom girth 40-50 cm well developed in bag size HDPE bag.
Shrubs (Providing . Supply and stacking at site as per direction of officer incharge)
Duranta repens of height 30-45 cm with thcik stem in medium size bags (DR)
Hymenocallis speciosa (spider lily) of height 30-45 cm with thick stem in medium size bags (HS)
Thumbergia erecta of height 30-45 cm with thick stem in medium size bags (TE)
Alphinia zerumbet of height of height 30 cm, with thick stem in medium size bags (AZ)
Mini Mixora of height 30-45 cm with thick stem in medium size bags (MI)
Acalypha wilkesiana of height 30-45 cm with thick stem in medium size bags (AW)
Cordyline termialis of height 30-45 cm, with thick stem in medium size bags (CT)
Nandina domestica of height 30-45 cm with thick stem in medium of size bags (Nd)
Jasminium sambac of geight 30-45 cm with thick stem in medium size bags (JS)
Plubagocapensis of height 30-45 cm with thick stem in medium size bags (PC)
Heliconia psittacorum Flore pleno of height 30-45 cm with thick stem in medium size bags (HP)
Variegated canna of height 30-45 cm with thick stem in medium size bags (VC)
Allamanda cathartica of height 30-45 cm with thick stem in medium size bags (ACA)
Tehvetia peruviana of height 30-45 cm with thick stem in medium size bags (TPE)
Oscimum scantum of height 30-45 cm with thick stem in medium size bags (OS)
Ground Cover (Providing . Supply and stacking at site as per direction of officer incharge)
Golden ophiopogon, having 10 to 15 leaves well developed with fresh & healthy in 25 cm size bag (GO)
Oohipogon japonicus having 10 to 15 leaves well developed with fresh & healthy in 25 cm size bag (OJ)
Asparagus spiringerii, full of leafy suckers in 25 cm size bags (AS)
Nephrolepis auriculata, havng 10 to 15 leaves well developed with fresh & healthy in 25 cm size bag (NA)
Liriope muscari having 10 to 15 leaves well developed with fresh & healthy in 25 cm size bag (LM)
Verbena bipinnatifida, having 10 to 15 leaves well developed with fresh & health in 25 cm size bag (VB)
Alternanthera dentata having 10 to 15 leaves well developed with fresh & healthy in 25 cm size bag (AD)
Roheo discolor, full of leafy suckers in 20 cm size bag.
Angelonia biflora, having 10 to 15 leaves well developed with fresh & healthy in 25 cm size bag (AB)
Syngonium podophyllum full of leafy suckers in 20 cm size bag (SP)
Pandaus variegated, having 10 to 15 leaves well developed with fresh & healthy in 25 cm size bag (PV)
Creepers (Providing . Supply and stacking at site as per direction of officer incharge)
Ipomea batatas, having 10 to 15 leaveds well developed with fresh & healthy in 25 cm size bag (IB)
Bamboo and grasses (Providing . Supply and stacking at site as per direction of officer incharge)
Bambusa multiplex of height 120-50 cm 2with 3-4 b4ranches and thicks tem in bag size HDPE bags(BM)
Pennisetum setaceum "Rubrum" with 5 to 6 branches in 20 cm size of bag (PSR)
Providing and laying sodding of zoysia tenuifolia (ZT) lawn gras sturn with earth 50mm to 60mm thickness, on existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with leight roller make the surface smoothena nd light watring with sprinkler and maintenance for 30 days or more itll the grass establish properly, as per directin of officer-in-charge
Planting
Plantaion of trees, shurbs, and hedge at site i/c watering and removal of unserviceable materi's as per direction o officer incharge (excluding cost of plant & water)
Shrubs plant (including bamboo and pennisetum
Trees plant
Ground cover including creepers
Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a "Helmholtz" fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be "tongue-and-grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge including wooden flooring installetion 12mm coating.
Accoustics for front, back & side wall - accoustics wall panelling with wooden channel with infill of 50mm/500gsm recron, gripper system with 15mm wood wool board & 12mm MDF with foam & pet panel fabric finish. We provide proper absorbtion & diffusion points. Accoustic celling with proper bass trap system
Supplying and fixing of Auditorium chairs of size 21 inches push back / Tipup Recliner chairs with Head support with LED lights on sides along with Installation in AV room as per the drawing complete in all respects as per the direction of Departmental officers ( AS PER quatation )
Supplying and laying of 1" thick teak wood plank flooring tile as per the drawing complete in all respects as per the direction of Departmental officers.
Finishing the top of slopped roof, sun-shade with Machine Pressed Ornamental Tiles of approved quality laid in cement mortar 1:3 20mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same red oxide mixed mortar etc complete, complying with standard specifications
Supplying and Stacking new best Mangalore ridge tiles at site of work for premeasurement as directed by the departmental officers etc., complete
Supplying and Fixing of mosquito net by using stainless steel mesh and aluminium frame with openable fit for require size and colour to the window,door,ventilators etc complete with standard specification.
Supplying and fixing of bird net by using stainlesss steel mesh and aluminium frame with openable fit for required size and colour to the courtyard and pargolas etc., complete complying with standard specifications.
Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. For 50mm dia UPVC pipe
Supply of ground y of Battery car is 8-Seater Golf Buggy has a robust powertrain that combines a single-speed direct drive system with a 5kW 3-phase AC induction drive motor from MAHLE 48V – 350A controller. overall width-1506mm, overall height-1891mm,wheelbase-2804mm, ground clearance -171mm,net vehicle weight -707kg, Gross vehicle weight -1267kg, Turning radius -5m,Max speed - 25kmph,Gradeability -20%, Tubeless tyres - 6ply
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCB as incoming and 5 nos. 63A TP MCB, 9 nos 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End
Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
Supply and clamping of 3-1/2 x 50 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps.
Supply and fixing of brass cable gland for 3 1/2 x 50 sq.mm aluminium PVC LTUG armoured cable with earth connection.
Supply and providing cable end termination of 3 1/2 x 50 sqmm PVC LTUG Aluminium armoured cable withnecessary aluminium cable sockets by crimping etc. with electrical connection comple.
Supply and clarnping of 3-1/2 x 185 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.
Supply and fixing of brass cable gland for 3 1/2 x 185 sq.mm LTUG armoured cable with earth connection.
Supply and providing cable end termination of 3 1/2 x 185sqmm PVC LTUG Aluminium armoured cable withnecessary aluminium cable sockets by crimping etc. with electrical connection complete.
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
Supply, fabrication, erection and commissioning of 400A dust and vermin proof floor mounting cubical type panel board of size 6ft x 5.5ft x 1.5ft made up of 16 SWG CRCA sheet steel for outer body and stiffness and doors, switch supports respectively and supply and fixing of following interior mounting switches with centre bus bar chamber and vertical covers on both sides of the bus bar chamber at the extreme ends side and confirming to IS specification. All the main switches should be L&T / Siemens make only interconnection of switches with busbar chamber.
1) 400A 4 Pole MCCB with Spreader Terminal and Rotary Handle as incomer - 1 No (L&T/Siemens) 3) 100 A 4 Pole MCCB with Spreader Terminal and Rotary Handle as outgoing - 6 Nos (L&T/Siemens) (4) 63 A 4 Pole MCCB with Spreader Terminal and Rotary Handle as outgoing - 4 Nos (L&T/Siemens) A separate chamber on top of one side should be built with multi function digital volt meter, ammeter and frequency meter with one set of LED pilot lamp set with fuse base, top with 10A HRC link for 3 phase (Siemns) the bus will have 2 Nos 1" x ⅛" earth bus must be run all around the panel to provide double earth connection to the cubical switches cable glands, cable adopter box, Multi function meter with CT coil etc. the bus should be mounted on synthetic moulded compound bus support at equal interval as per IS specifications. he switch should be separated from the bus by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as per CEA (MSES) Regulations 2023.
The panel should be painted with two high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3"x1½"x½" iron frame work support complete.
Supply, Erection, Testing, Commissioning and Handing over of 1 No 250 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below 1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 307 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins/ Equ) 1. Dry type Air cleaner 2. Expansion bellow 3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter(pre and micro) 8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10. 24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate 13. Residential Mufler 14. Fly wheel with starter ring.
ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure 2. High Water temperature 3. Vee-belt failure and over speed 4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load. 2. ALTERNATOR : Alternator capacity of 250 KVA/200 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ Greaves/ Equivlent.)
3.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt distance shall be less than 75 DBA average or as per CPCB norms. Surface treatment – Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and posphating. The canopies are passed through seven – tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability.Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature. No grouting required on the ground, only a level surface capable of with standing the DG weight.
4. FUEL TANK : 450 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance. 5. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges. 6. Battery: 2 Nos 12V 180AHR Battery. (Make:Exide/Equ )
28) Rectangular copper bus bars (1 No for each phase, neutral and earthling terminal) of adequate capacity duly colour coded with head shrinkable PVC sleeves. 29) 1 No mains voltage monitor 30) Hotter/Audio alarm for indication set fails to start and for DG O/L 31) 1 set timers 32) Audio and visual indication arrangement for a) Low lubricating oil pressure b) High water temperature c) over speed
Providing suitable concrete foundation with cement concrete 1:2:4 for height of 3feet with sand cushion all around the foundation and erection of 250kVA Generator set with proper alignment over the foundation
Providing 150 litres fuel oil to run the set for 8 hours on load, testing and commissioning using water rheostat or suitable loading elements
Supplying and fixing of Exhaust pipe with silencer for 250 KVA Genset
AADHISHIVAM ENGINEERING CONSTRUCTION LLP (BID ID -1257176)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid