Scheme for providing Temporary Shelter to 3000 displaced Families in connection with the Law And Order crisis (June 2023) Construction of Prefabricated Structures for 3000 families Package I for 1400 families

Amount

SH-(A)-Pre-fabricated Houses for 800 families in Churachandpur District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. in all kinds of soil.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders,bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

12mm cement plaster 1:3 finished with a floating coat of neat cement

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (800x1035) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

SH-(B)-Pre-fabricated Dining Cum Community hall for 800 families in Churachandpur District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. in all kinds of soil

Supply and Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground as directed by the Engineer in charge

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders,bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth(excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

12mm cement plaster 1:3 finished with a floating coat of neat cement

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (1200x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (800x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

c) Supplying, fixing and fittings of door of size (750x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (1000X1000) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Providing and fixing white wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: single hole basin mixer

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

SH-(C)-W.S. & S.I. for CCP for 800 families in Churachandpur District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in all kinds of soil

Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth(excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Structral steel work in built up tubular Square(60*60*3mm) trusses etc. including cutting,hoisting,fixing in position and applying a primingcoat of approved steel primer ,including welding and bolted including special shaped washer etc.all complete.(hot finished seamless type tubes.

Providing and fixing white viterous china water closet squatting pan indian type 450mm

Proving and fixing UPVC SOIL,waste ,rain water and ventpipes including all requisition fittings,jointings of pipes & fiitings with solvent cement ,trnching,refilling and testing of joints complete as per direction of engineer in charge. 110mm dia. Pipe

Supplying and Providing of PVC Septic tank(2000 Ltr.) i/c all accessories

Providing and fixing polyethelene-aluminium-ployethelene PE- AL -AE composite pressure pipe conforming to IS-15450,U.V stabilizing with carbon black having thermal stability for hot and cold water supply,capable to withstand temp. up to 80 degree C ,including all special fittings of composite materials . internal work -exposed on wall:1620(20 mm OD ) pipe

Providing and placing on terrace (at all floor level)polyethelene water storage tank IS12701 marked,with cover and suitable locking arrangments and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for the tank (80 nos)

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Providing and fixing controlled flush, low level cistern with all fittings completed - 10 litre (full flush) capacity (white)

SH-(D)-Drinking Water storage arrangements for 800 families in Churachandpur District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m all kinds of soil

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground as directed by the Engineer in charge

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Supply and Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Providing and laying in floor cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering

Neat cement punning

12mm cement plaster 1:3 finished with a floating coat of neat cement

Providing polythelene Storage Tanks-(4 nos of 1000 litres capacity for 100 families)

Providing & fixing brass bib cock 15mm

SH-(D)- Water storage pond 800 families in Churachandpur District

Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.50m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.50m, as directed by the Engineer-in-Charge - All kinds of soil

SH-(E)-Shingling for Approach Roads and Artery Roads 800 families in Churachandpur District

Providing laying & compacting granular base/sub-base according to lines, grades& cross-sections by using naturally occurring sand gravel/conforming to IRC Grade 2 of M.O.S.T. specification free from organic or other deleterious constituents compact by rolling with power roller of 8 to10 tonnes capacity in layers not exceeding 150 mm (spread thickness)including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge. ( without carriage charge of all materials)

SH-(F)- Providing IEI 800 families home in Churachandpur District

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated Al. conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR insulated Al. conductor single core cable in PVC casing & capping along with 1 No. 4mm2 PVC insulated Al. conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with the following sizes of PVC ins. Al.cond single core cable in PVC casing & capping etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing plate and switch box i/c connection but excluding plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core Al. conductor cable and G.I. beerer wire as reqd.

S/F brass batten/angle holder i/cconnection etc. as reqd.

S/F 12W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha/Crompton/Similar)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(a)10 amp MCB "C" Curve

(b)20 amp MCB "C" Curve

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

SH:- IEI for Pre-Fab Dining cum Community Hall - 4 nos. (Each for 50 families).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated Al. conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 PVC insulated Al. conductor single core cable in PVC casing & capping with 1 No. 4mm2 PVC insulated Al. conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with the following sizes of PVC ins. Al.cond single core cable in PVC casing & capping etc.as reqd.

2X4mm2+1X4mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing plate and switch box i/c connection but excluding plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core Al. conductor cable and G.I. beerer wire as reqd.

S/F brass batten/angle holder i/cconnection etc. as reqd.

S/F 15W LED bulb.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(a)20 amp MCB "C" Curve

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(Sh: Installation of 100 KVA transformer sub-station)

Providing & Installation of 11/0.4 KV 100 KVA Distribution Transformer i/c 2 nos. of 9m steel tubular poles, channels,angles,clamps, A.B. switch, D.B. box,sub-station earthing, sub-station fencing, energy meter, danger board, lightening arrestor and pole muffling complete set etc as reqd.

Standard bill of materials for one Km. of 11 KV line with ACSR Rabbit (6/1/3.35 mm) conductor with 9 m long steel tubular pole.

(Sh: Compound Lighting & External Service Connection)

S/F swaged type steel tubular pole 8 mt.long as per 410-SP-14 conforming to IS-2713 (Pt-II) 1980 with bracket in cement concrete 1:3:6 (1 cem.:3 c/sand : 6 gr. St. 40mm n/size) foundation i/c excavation and refilling etc. as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

S/F L.T. cross arm 50X50X6mm - 2 wires

S/F back clamp for L.T. pole

S/F stay set complete with stay wire & stay insulator etc.as reqd.

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F G.I. bracket 1 mt. long single arm etc.as reqd.

S/D of 2.5 sq mm FR Cu. Conductor.

SITC LED Street Light 60W 757K made of pressure dia housing with toughned glass and individual high power LED with secondary optics IP66 protection & impact resistance of (Havells) ENDURAPEARLPLUSL60W complete with all accessories i/c connection etc. as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 4 way single door

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(Sh:Providing and installation of water pump)

S/F of 3 HP, 230 volt single phase water pump (Aqatex ACS 2280) complete with all accessories i/c connection etc.as reqd.

S/F of 7.5 HP, 230 volt three phase borewell submersible water pump (Texmo JTI5S/8) complete with all accessories i/c connection etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X10mm2+1X10mm2 earth wire

P/F 125 amp. TPN stand ground on load change over switch (Compact design) 415/500 V i/c connection etc. as reqd.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

SH-(A)-Pre-fabricated Houses for 200 families in Imphal West District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. in all kinds of soil.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders,bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

12mm cement plaster 1:3 finished with a floating coat of neat cement

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (800x1035) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

SH-(B)-Pre-fabricated Dining Cum Community hall for 200 families in Imphal West District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. in all kinds of soil

Supply and Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground as directed by the Engineer in charge

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders,bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth(excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

12mm cement plaster 1:3 finished with a floating coat of neat cement

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (1200x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (800x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

c) Supplying, fixing and fittings of door of size (750x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (1000X1000) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Providing and fixing white wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: single hole basin mixer

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

SH-(C)-W.S. & S.I. for Imphal West District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in all kinds of soil

Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth(excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Structral steel work in built up tubular Square(60*60*3mm) trusses etc. including cutting,hoisting,fixing in position and applying a primingcoat of approved steel primer ,including welding and bolted including special shaped washer etc.all complete.(hot finished seamless type tubes.

Providing and fixing white viterous china water closet squatting pan indian type 450mm

Proving and fixing UPVC SOIL,waste ,rain water and ventpipes including all requisition fittings,jointings of pipes & fiitings with solvent cement ,trnching,refilling and testing of joints complete as per direction of engineer in charge. 110mm dia. Pipe

Supplying and Providing of PVC Septic tank(2000 Ltr.) i/c all accessories

Providing and fixing polyethelene-aluminium-ployethelene PE- AL -AE composite pressure pipe conforming to IS-15450,U.V stabilizing with carbon black having thermal stability for hot and cold water supply,capable to withstand temp. up to 80 degree C ,including all special fittings of composite materials . internal work -exposed on wall:1620(20 mm OD ) pipe

Providing and placing on terrace (at all floor level)polyethelene water storage tank IS12701 marked,with cover and suitable locking arrangments and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for the tank (80 nos)

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Providing and fixing controlled flush, low level cistern with all fittings completed - 10 litre (full flush) capacity (white)

SH-(D)-Drinking Water storage arrangements for 200 families in Imphal West District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m all kinds of soil

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground as directed by the Engineer in charge

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Supply and Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Providing and laying in floor cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering

Neat cement punning

12mm cement plaster 1:3 finished with a floating coat of neat cement

Providing polythelene Storage Tanks-(4 nos of 1000 litres capacity for 100 families)

Providing & fixing brass bib cock 15mm

SH-(D)- Water storage pond 200 families in Imphal West District

Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.50m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.50m, as directed by the Engineer-in-Charge - All kinds of soil

SH-(E)-Shingling for Approach Roads and Artery Roads 200 families in Imphal West District

Providing laying & compacting granular base/sub-base according to lines, grades& cross-sections by using naturally occurring sand gravel/conforming to IRC Grade 2 of M.O.S.T. specification free from organic or other deleterious constituents compact by rolling with power roller of 8 to10 tonnes capacity in layers not exceeding 150 mm (spread thickness)including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge. ( without carriage charge of all materials)

SH-(F)- Providing IEI 200 families in Imphal West District

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated Al. conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR insulated Al. conductor single core cable in PVC casing & capping along with 1 No. 4mm2 PVC insulated Al. conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with the following sizes of PVC ins. Al.cond single core cable in PVC casing & capping etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing plate and switch box i/c connection but excluding plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core Al. conductor cable and G.I. beerer wire as reqd.

S/F brass batten/angle holder i/cconnection etc. as reqd.

S/F 12W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha/Crompton/Similar)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(a)10 amp MCB "C" Curve

(b)20 amp MCB "C" Curve

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

SH:- IEI for Pre-Fab Dining cum Community Hall - 4 nos. (Each for 50 families).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated Al. conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 PVC insulated Al. conductor single core cable in PVC casing & capping with 1 No. 4mm2 PVC insulated Al. conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with the following sizes of PVC ins. Al.cond single core cable in PVC casing & capping etc.as reqd.

2X4mm2+1X4mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing plate and switch box i/c connection but excluding plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core Al. conductor cable and G.I. beerer wire as reqd.

S/F brass batten/angle holder i/cconnection etc. as reqd.

S/F 15W LED bulb.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(a)20 amp MCB "C" Curve

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(Sh: Installation of 100 KVA transformer sub-station)

Providing & Installation of 11/0.4 KV 100 KVA Distribution Transformer i/c 2 nos. of 9m steel tubular poles, channels,angles,clamps, A.B. switch, D.B. box,sub-station earthing, sub-station fencing, energy meter, danger board, lightening arrestor and pole muffling complete set etc as reqd.

Standard bill of materials for one Km. of 11 KV line with ACSR Rabbit (6/1/3.35 mm) conductor with 9 m long steel tubular pole.

(Sh: Compound Lighting & External Service Connection)

S/F swaged type steel tubular pole 8 mt.long as per 410-SP-14 conforming to IS-2713 (Pt-II) 1980 with bracket in cement concrete 1:3:6 (1 cem.:3 c/sand : 6 gr. St. 40mm n/size) foundation i/c excavation and refilling etc. as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

S/F L.T. cross arm 50X50X6mm - 2 wires

S/F back clamp for L.T. pole

S/F stay set complete with stay wire & stay insulator etc.as reqd.

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F G.I. bracket 1 mt. long single arm etc.as reqd.

S/D of 2.5 sq mm FR Cu. Conductor.

SITC LED Street Light 60W 757K made of pressure dia housing with toughned glass and individual high power LED with secondary optics IP66 protection & impact resistance of (Havells) ENDURAPEARLPLUSL60W complete with all accessories i/c connection etc. as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 4 way single door

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(Sh:Providing and installation of water pump)

S/F of 3 HP, 230 volt single phase water pump (Aqatex ACS 2280) complete with all accessories i/c connection etc.as reqd.

S/F of 7.5 HP, 230 volt three phase borewell submersible water pump (Texmo JTI5S/8) complete with all accessories i/c connection etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X10mm2+1X10mm2 earth wire

P/F 125 amp. TPN stand ground on load change over switch (Compact design) 415/500 V i/c connection etc. as reqd.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

SH-(A)-Pre-fabricated Houses for 200 families in Kakching District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. in all kinds of soil.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders,bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

12mm cement plaster 1:3 finished with a floating coat of neat cement

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (800x1035) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

SH-(B)-Pre-fabricated Dining Cum Community hall for 200 families in Kakching District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. in all kinds of soil

Supply and Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground as directed by the Engineer in charge

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders,bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth(excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

12mm cement plaster 1:3 finished with a floating coat of neat cement

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (1200x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (800x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

c) Supplying, fixing and fittings of door of size (750x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (1000X1000) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Providing and fixing white wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: single hole basin mixer

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

SH-(C)-W.S. & S.I. for Kakching District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in all kinds of soil

Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth(excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Structral steel work in built up tubular Square(60*60*3mm) trusses etc. including cutting,hoisting,fixing in position and applying a primingcoat of approved steel primer ,including welding and bolted including special shaped washer etc.all complete.(hot finished seamless type tubes.

Providing and fixing white viterous china water closet squatting pan indian type 450mm

Proving and fixing UPVC SOIL,waste ,rain water and ventpipes including all requisition fittings,jointings of pipes & fiitings with solvent cement ,trnching,refilling and testing of joints complete as per direction of engineer in charge. 110mm dia. Pipe

Supplying and Providing of PVC Septic tank(2000 Ltr.) i/c all accessories

Providing and fixing polyethelene-aluminium-ployethelene PE- AL -AE composite pressure pipe conforming to IS-15450,U.V stabilizing with carbon black having thermal stability for hot and cold water supply,capable to withstand temp. up to 80 degree C ,including all special fittings of composite materials . internal work -exposed on wall:1620(20 mm OD ) pipe

Providing and placing on terrace (at all floor level)polyethelene water storage tank IS12701 marked,with cover and suitable locking arrangments and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for the tank (80 nos)

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Providing and fixing controlled flush, low level cistern with all fittings completed - 10 litre (full flush) capacity (white)

SH-(D)-Drinking Water storage arrangements for 200 families in Kakching District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m all kinds of soil

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground as directed by the Engineer in charge

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Supply and Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Providing and laying in floor cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering

Neat cement punning

12mm cement plaster 1:3 finished with a floating coat of neat cement

Providing polythelene Storage Tanks-(4 nos of 1000 litres capacity for 100 families)

Providing & fixing brass bib cock 15mm

SH-(D)- Water storage pond for 200 families in Kakching District

Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.50m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.50m, as directed by the Engineer-in-Charge - All kinds of soil

SH-(E)-Shingling for Approach Roads and Artery Roads for 200 families in Kakching District

Providing laying & compacting granular base/sub-base according to lines, grades& cross-sections by using naturally occurring sand gravel/conforming to IRC Grade 2 of M.O.S.T. specification free from organic or other deleterious constituents compact by rolling with power roller of 8 to10 tonnes capacity in layers not exceeding 150 mm (spread thickness)including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge. ( without carriage charge of all materials)

SH-(F)- Providing IEI for 200 families home in Kakching District

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated Al. conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR insulated Al. conductor single core cable in PVC casing & capping along with 1 No. 4mm2 PVC insulated Al. conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with the following sizes of PVC ins. Al.cond single core cable in PVC casing & capping etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing plate and switch box i/c connection but excluding plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core Al. conductor cable and G.I. beerer wire as reqd.

S/F brass batten/angle holder i/cconnection etc. as reqd.

S/F 12W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha/Crompton/Similar)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(a)10 amp MCB "C" Curve

(b)20 amp MCB "C" Curve

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

SH:- IEI for Pre-Fab Dining cum Community Hall - 4 nos. (Each for 50 families).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated Al. conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 PVC insulated Al. conductor single core cable in PVC casing & capping with 1 No. 4mm2 PVC insulated Al. conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with the following sizes of PVC ins. Al.cond single core cable in PVC casing & capping etc.as reqd.

2X4mm2+1X4mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing plate and switch box i/c connection but excluding plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core Al. conductor cable and G.I. beerer wire as reqd.

S/F brass batten/angle holder i/cconnection etc. as reqd.

S/F 15W LED bulb.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(a)20 amp MCB "C" Curve

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(Sh: Installation of 100 KVA transformer sub-station)

Providing & Installation of 11/0.4 KV 100 KVA Distribution Transformer i/c 2 nos. of 9m steel tubular poles, channels,angles,clamps, A.B. switch, D.B. box,sub-station earthing, sub-station fencing, energy meter, danger board, lightening arrestor and pole muffling complete set etc as reqd.

Standard bill of materials for one Km. of 11 KV line with ACSR Rabbit (6/1/3.35 mm) conductor with 9 m long steel tubular pole.

(Sh: Compound Lighting & External Service Connection)

S/F swaged type steel tubular pole 8 mt.long as per 410-SP-14 conforming to IS-2713 (Pt-II) 1980 with bracket in cement concrete 1:3:6 (1 cem.:3 c/sand : 6 gr. St. 40mm n/size) foundation i/c excavation and refilling etc. as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

S/F L.T. cross arm 50X50X6mm - 2 wires

S/F back clamp for L.T. pole

S/F stay set complete with stay wire & stay insulator etc.as reqd.

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F G.I. bracket 1 mt. long single arm etc.as reqd.

S/D of 2.5 sq mm FR Cu. Conductor.

SITC LED Street Light 60W 757K made of pressure dia housing with toughned glass and individual high power LED with secondary optics IP66 protection & impact resistance of (Havells) ENDURAPEARLPLUSL60W complete with all accessories i/c connection etc. as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 4 way single door

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(Sh:Providing and installation of water pump)

S/F of 3 HP, 230 volt single phase water pump (Aqatex ACS 2280) complete with all accessories i/c connection etc.as reqd.

S/F of 7.5 HP, 230 volt three phase borewell submersible water pump (Texmo JTI5S/8) complete with all accessories i/c connection etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X10mm2+1X10mm2 earth wire

P/F 125 amp. TPN stand ground on load change over switch (Compact design) 415/500 V i/c connection etc. as reqd.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

SH-(A)-Pre-fabricated Houses for 200 families in Thoubal District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. in all kinds of soil.

Supply and filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground surface as directed by the Engineer in charge.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders,bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth (excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

12mm cement plaster 1:3 finished with a floating coat of neat cement

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (900x2020)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (650x2000)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (800x1035) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

SH-(B)-Pre-fabricated Dining Cum Community hall for 200 families Thoubal District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. in all kinds of soil

Supply and Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground as directed by the Engineer in charge

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders,bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth(excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Providing and laying in position cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering - all work upto plinth level

12mm cement plaster 1:3 finished with a floating coat of neat cement

Supplying and installation of PUF wall panels of 50mm thick composite PUF sandwich between outer and inner PPGI sheet (prepainted glavanized steel sheet ) of thickness-90 GSM and with 50mm thick layer of rigid CFC free polyerethane foam of density 40±2 kg/m3 as insulation , the wall panel will have tongue & groove arrangement and interlocked using cam lock system . PPGI sheet shall have a minimum coating of 4-5 micron epoxy primer and 25 micron polyester top coat on the finish surface and 7-8 micron primer alkyl base on reverse, color shall be preferably & RAL 9002 off white or RAL 5012 blue. Panel shall be GRIHA certified with all fittings and accessories complete as per approved design & drawings and as per instruction of the engineer in charge.

Providing & fixing precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engr-in-charge) with zinc coating 120 gms/sqm as per IS:277, in 240 mpa steel grade, 5-7 microns apoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engr-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with - Precoated galvanised iron profile sheets 0.50 mm thick

Providing & fixing precoated galvanised sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete: Ridges plain (500-600mm) - Precoated galvanised iron profile sheets 0.50 mm thick

a) Supplying, fixing and fittings of door of size (1200x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

b) Supplying, fixing and fittings of door of size (800x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

c) Supplying, fixing and fittings of door of size (750x2100)mm with M.S frame and puff panel shutter with PPGI channel frame including all door fittings and accessories as per approved drawing and design and as per instruction of the site engineer etc. complete.

a) Supplying ,fixing and fitting of powder coated extruded Aluminium window frame including clear float glass of 4mm thick 2 track sliding shutter of size (1000X1000) mm with aluminium grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net including locking arragment as per approved drawings and design and direction of engineer incharge etc. complete.

Supplying ,fixing and fitting of PPGI frame ventilator for 450x450mm with PPGI louver shutter and Aluminium Grill of 50mm square mesh of 4.5mm dia. Along with 1.2mm fiber mosquito net as per approved drawings and design and direction of engineer incharge etc. complete.

Providing and fixing white wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: single hole basin mixer

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete - Hot finished seamless tubes

SH-(C)-W.S. & S.I. for 200 families in Thoubal District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m in all kinds of soil

Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete (b) Thermo-Mechanically Treated bars

Centering and shuttering including strutting, proping etc. and removal of form for lintel,bean,plinth beam, girders, bressumers and cantilevers.

Providing & laying in position specified grade of reinforced cement concret, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level (b) 1:1½:3 (1 cement : 1½ : 3c/sand : 4 graded stone aggt. 20mm nominal size).

Filling available excavated earth(excluding rock) in trenchs,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50m and lift upto 1.5m.

Structral steel work in built up tubular Square(60*60*3mm) trusses etc. including cutting,hoisting,fixing in position and applying a primingcoat of approved steel primer ,including welding and bolted including special shaped washer etc.all complete.(hot finished seamless type tubes.

Providing and fixing white viterous china water closet squatting pan indian type 450mm

Proving and fixing UPVC SOIL,waste ,rain water and ventpipes including all requisition fittings,jointings of pipes & fiitings with solvent cement ,trnching,refilling and testing of joints complete as per direction of engineer in charge. 110mm dia. Pipe

Supplying and Providing of PVC Septic tank(2000 Ltr.) i/c all accessories

Providing and fixing polyethelene-aluminium-ployethelene PE- AL -AE composite pressure pipe conforming to IS-15450,U.V stabilizing with carbon black having thermal stability for hot and cold water supply,capable to withstand temp. up to 80 degree C ,including all special fittings of composite materials . internal work -exposed on wall:1620(20 mm OD ) pipe

Providing and placing on terrace (at all floor level)polyethelene water storage tank IS12701 marked,with cover and suitable locking arrangments and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for the tank (80 nos)

Providing and fixing brass bib cock of approved quality: a) 15 mm nominal bore

Providing and fixing controlled flush, low level cistern with all fittings completed - 10 litre (full flush) capacity (white)

SH-(D)-Drinking Water storage arrangements for 200 families in Thoubal District

Earth work in excavation by mechanical means(Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or on plan) i/c dressing of sides ramming of bottom lift up to 1.5m i/c getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m all kinds of soil

Supplying and Providing 75mm thick (unconsolidated) of brick aggt. 40mm nominal size well rammed and consolidated i/c preparation of ground as directed by the Engineer in charge

Providing laying cement concrete in foundation and plinth e/c the cost of centering and shuttering in 1:4:8(1 cement : 4 c/sand : 8 s/agtt 40mm nominal gauge)

Brick work with 1st class common burnt clay F.P.S (non modular) brick in foundation and plinth in 1:4

Supply and Filling in plinth with sandy soil under floor i/c watering, ramming, consolidating and dressing complete.

Providing and laying in floor cement concrete of M15( 1:2:4) excluding the cost of centering and shuttering

Neat cement punning

12mm cement plaster 1:3 finished with a floating coat of neat cement

Providing polythelene Storage Tanks-(4 nos of 1000 litres capacity for 100 families)

Providing & fixing brass bib cock 15mm

SH-(D)- Water storage pond for 200 families in Thoubal District

Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.50m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.50m, as directed by the Engineer-in-Charge - All kinds of soil

SH-(E)-Shingling for Approach Roads and Artery Roads 200 families in Thoubal District

Providing laying & compacting granular base/sub-base according to lines, grades& cross-sections by using naturally occurring sand gravel/conforming to IRC Grade 2 of M.O.S.T. specification free from organic or other deleterious constituents compact by rolling with power roller of 8 to10 tonnes capacity in layers not exceeding 150 mm (spread thickness)including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge. ( without carriage charge of all materials)

SH-(F)- Providing IEI for 200 families home in Thoubal District

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated Al. conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR insulated Al. conductor single core cable in PVC casing & capping along with 1 No. 4mm2 PVC insulated Al. conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with the following sizes of PVC ins. Al.cond single core cable in PVC casing & capping etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing plate and switch box i/c connection but excluding plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core Al. conductor cable and G.I. beerer wire as reqd.

S/F brass batten/angle holder i/cconnection etc. as reqd.

S/F 12W LED bulb.

S/F fan hook i/c bolt & nuts.

S/F 48"sweep (1200mm) AC ceiling fan complete with down rod,canopy, 3 (three) blades with regulator etc.as reqd. (Make Bajaj/Usha/Crompton/Similar)

S/F stepped type electronic fan regulator on the existing modular plate sewitch box i/c connection but excluding modular plate etc.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(a)10 amp MCB "C" Curve

(b)20 amp MCB "C" Curve

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

SH:- IEI for Pre-Fab Dining cum Community Hall - 4 nos. (Each for 50 families).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 PVC insulated Al. conductor single core cable in pvc casing & capping with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5mm2 PVC insulated Al. conductor single core cable etc.as reqd.

Group B

Group C

Wiring for light point/power plug with 2X4mm2 PVC insulated Al. conductor single core cable in PVC casing & capping with 1 No. 4mm2 PVC insulated Al. conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with the following sizes of PVC ins. Al.cond single core cable in PVC casing & capping etc.as reqd.

2X4mm2+1X4mm2 earth wire

Supply and fixing (following piano type switch/socket) on the existing plate and switch box i/c connection but excluding plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

Wiring for submain with 10mm2 weather proof twin core Al. conductor cable and G.I. beerer wire as reqd.

S/F brass batten/angle holder i/cconnection etc. as reqd.

S/F 15W LED bulb.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+4 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(a)20 amp MCB "C" Curve

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

(Sh: Installation of 100 KVA transformer sub-station)

Providing & Installation of 11/0.4 KV 100 KVA Distribution Transformer i/c 2 nos. of 9m steel tubular poles, channels,angles,clamps, A.B. switch, D.B. box,sub-station earthing, sub-station fencing, energy meter, danger board, lightening arrestor and pole muffling complete set etc as reqd.

Standard bill of materials for one Km. of 11 KV line with ACSR Rabbit (6/1/3.35 mm) conductor with 9 m long steel tubular pole.

(Sh: Compound Lighting & External Service Connection)

S/F swaged type steel tubular pole 8 mt.long as per 410-SP-14 conforming to IS-2713 (Pt-II) 1980 with bracket in cement concrete 1:3:6 (1 cem.:3 c/sand : 6 gr. St. 40mm n/size) foundation i/c excavation and refilling etc. as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

S/F L.T. cross arm 50X50X6mm - 2 wires

S/F back clamp for L.T. pole

S/F stay set complete with stay wire & stay insulator etc.as reqd.

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

S/F G.I. bracket 1 mt. long single arm etc.as reqd.

S/D of 2.5 sq mm FR Cu. Conductor.

SITC LED Street Light 60W 757K made of pressure dia housing with toughned glass and individual high power LED with secondary optics IP66 protection & impact resistance of (Havells) ENDURAPEARLPLUSL60W complete with all accessories i/c connection etc. as reqd.

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 4 way single door

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

(Sh:Providing and installation of water pump)

S/F of 3 HP, 230 volt single phase water pump (Aqatex ACS 2280) complete with all accessories i/c connection etc.as reqd.

S/F of 7.5 HP, 230 volt three phase borewell submersible water pump (Texmo JTI5S/8) complete with all accessories i/c connection etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in surface/recessed PVC conduit etc.as reqd.

2X10mm2+1X10mm2 earth wire

P/F 125 amp. TPN stand ground on load change over switch (Compact design) 415/500 V i/c connection etc. as reqd.

P/F 60 amp MCSPN switch unit 240/250v with rewireable fuses i/c drilling holes on the board connection, earthing the body etc.as reqd.

Earthing with G.I.earth pipe 4.5mt.long and 40 mm dia. i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

Extra for using salt and charcoal for pipe electrode as reqd.

P/F 4.06mm dia.copper wire on surface or in recess for loop earthing etc.as reqd.

Supply and drawing of AB cable of size (3x50+1x35)mm2

M/s Seven Clan Agency

M/s LL Enterprises