Loading
Loading…
Loading…
Tender Value
₹52.2 L
EMD Value
₹1.0 L
Closing Date
28 Sept 2026, 2:00 pmDue tomorrow
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
OA/1
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: Advance Correction Slip No. 1) Ref: 2022/ce- i/ct/gcc-2022/policy dated- 14.07.2022) A. Para 10.2., Part I of GCC shall be read as under: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover under: Financial Eligibility Criteria: Advance Correction Slip No. 1) Ref: 2022/ce-i/ct/gcc-2022/policy dated- 14.07.2022) A. Para 10.2., Part I of GCC shall be read as under: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover under: The tenderers shall submit requisite information as per Annexure-XIV (as per tender document & NIT), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar Nature of work: Any Civil Engineering Works.
16 conditions · 5 needing a document upload
A . Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. 1. The details of the works completed by the tenderer during the last Seven years to be filled in Annexure-I. 2. The details of Plants and Machinery with the tenderer to be filled in Annexure- II. 3. Details of Personnel and Organization of the Tenderer to be filled in Annexure-III. 4. Details of Works presently on hand of the Tenderer to be filled in Annexure- IV. 5. The details regarding Association of Railway Officer s with the tenderer to be filled in Annexure- V. 6. List of the Arbitration cases of the Tenderer during last Five years to be filled in Annexure-VI. 7. List of the Court cases of the Tenderer during last Five years to be filled in Annexure- VII. 8. NEFT MANDATE FORM. All Payments to the agency including the refund of the Earnest Money of the unsuccessful bidder preferably will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure-VIII. 9.Format for Certificate to be uploaded by Tenderer Along with the tender documents Annexure-IX and IX-A (As per GCC-2022 Annexure-V and V-A). 10. GST COMPLAINT INVOICE Annexure-X 11. LETTER OF CREDIT Annexure-XI, 12. Bid Capacity Declaration Annexure-XII.13. Bid Security declaration Annexure-XIII and 14. Annual Contractual Turnover Data Declaration Annexure-XIV (As per GCC-2022 Annexure-VI-B).
B . T h e tender offer complete in a l l respect and with all documents is t o b e submitted online by e-tendering process through the website www.ireps.gov.in before the closing time/date of this tender as mentioned in the NIT (Notice Inviting Tender). Tenderer can revise the bids any number of times till the closing time/date of the tender. No manual offers shall be accepted.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Repairing work of PWI and IOW office and store building including the painting, toilet renovation, replacement of door, window, roof treatment with replacing damaged old asbestos sheet, plinth protection, sanitary fittings, pipeline, lettering etc under AEN/LLH.
213_2026-27~ER
213_2026-27
Open
Works - General
6 Months
Howrah, West Bengal
₹0
₹1.0 L
3 Sept 2026
3 Sept 2026
14 Sept 2026
226 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 52,18,249.15 | ||
| — | 20.00 | — | — | ||
| EARTH WORK // General // Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. // All kinds of soil | — | — | — | 3,195 | |
| — | 5.00 | — | — | ||
| EARTH WORK // General // Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | — | — | — | 882 | |
| — | 10.00 | — | — | ||
| EARTH WORK // General // Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | — | — | — | 19,113.75 | |
| — | 1000.00 | — | — | ||
| EARTH WORK // General // Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. // All kinds of soil | — | — | — | 30,735 | |
| — | 2000.00 | — | — | ||
| EARTH WORK // General // Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | — | — | — | 31,680 | |
| — | 15.00 | — | — | ||
| CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | — | — | — | 1,12,601.48 | |
| — | 15.00 | — | — | ||
| CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: // 1:1 1/2:3 (1 cement : 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | — | — | — | 1,39,826.92 | |
| — | 10.00 | — | — | ||
| CONCRETE WORK // CEMENT CONCRETE (CAST IN SITU) // Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : // 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | — | — | — | 70,906.5 | |
| — | 60.00 | — | — | ||
| CONCRETE WORK // MISCELLANEOUS // Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | — | — | — | 40,462.2 | |
| — | 15.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // CAST IN SITU // Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : // 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | — | — | — | 1,22,117.63 | |
| — | 30.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // CAST IN SITU // Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : // 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | — | — | — | 2,93,029.65 | |
| — | 7.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // PRE-CAST RCC // Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | — | — | — | 66,691.17 | |
| — | 35.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Foundations, footings, bases of columns, etc. for mass concrete | — | — | — | 12,352.73 | |
| — | 50.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Suspended floors, roofs, landings, balconies and access platform | — | — | — | 41,726.25 | |
| — | 40.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Lintels, beams, plinth beams, girders, bressummers and cantilevers | — | — | — | 26,510.4 | |
| — | 40.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // FORM WORK // Centering and shuttering including strutting, propping etc. and removal of form for // Columns, Pillars, Piers, Abutments, Posts and Struts | — | — | — | 34,606.8 | |
| — | 1500.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more. | — | — | — | 1,45,597.5 | |
| — | 1500.00 | — | — | ||
| REINFORCEMENT CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more. | — | — | — | 1,45,597.5 | |
| — | 10.00 | — | — | ||
| MASONRY WORK // General // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: // Cement mortar 1:6 (1 cement : 6 coarse sand) | — | — | — | 64,190.25 | |
| — | 10.00 | — | — | ||
| MASONRY WORK // General // Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : // Cement mortar 1:6 (1 cement : 6 coarse sand) | — | — | — | 81,953.55 | |
| — | 200.00 | — | — | ||
| MASONRY WORK // General // Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure above plinth level and upto floor five level. | — | — | — | 1,55,817 | |
| — | 300.00 | — | — | ||
| CLADDING WORK // STONE WORK DRY CLADDING // Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | — | — | — | 3,42,346.5 | |
| — | 100.00 | — | — | ||
| WOOD AND P.V.C. WORK // MISCELLANEOUS-WOOD WORK // Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. // With 2nd class teak wood beading 62X19 mm | — | — | — | 1,17,751.5 | |
| — | 300.00 | — | — | ||
| STEEL WORK // General // Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | — | — | — | 31,684.5 | |
| — | 750.00 | — | — | ||
| STEEL WORK // General // Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | — | — | — | 90,247.5 | |
| — | 800.00 | — | — | ||
| STEEL WORK // General // Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. // Hot finished welded type tubes | — | — | — | 1,39,968 | |
| — | 250.00 | — | — | ||
| WOOD AND P.V.C. WORK // MISCELLANEOUS-WOOD WORK // Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. // Fixed to openings /wooden frames with rawl plugs screws etc. | — | — | — | 53,628.75 | |
| — | 100.00 | — | — | ||
| WOOD AND P.V.C. WORK // BRIGHT FINISHED M.S. FITTINGS // Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete : // 100x58x1.90 mm | — | — | — | 4,050 | |
| — | 20.00 | — | — | ||
| WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | — | — | — | 10,277.1 | |
| — | 15.00 | — | — | ||
| WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing to existing door frames. // 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | — | — | — | 50,230.13 | |
| — | 15.00 | — | — | ||
| WOOD AND P.V.C. WORK // GYPSUM BOARD PARTITIONS // Providing and fixing to existing door frames. // 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | — | — | — | 60,600.82 | |
| — | 25.00 | — | — | ||
| STEEL WORK // General // Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. // Using flats 30x6 mm for diagonal braces and central cross piece | — | — | — | 1,25,184.38 | |
| — | 15.00 | — | — | ||
| NEW TECHNOLOGIES AND MATERIALS // PREFAB/PRECAST TECHNOLOGY // Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). // Frame size 50 x 100 mm | — | — | — | 12,793.95 | |
| — | 457.00 | — | — | ||
| ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | — | — | — | 3,03,806.74 | |
| — | 50.00 | — | — | ||
| ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : // Gutter (600 mm over all girth) | — | — | — | 59,116.5 | |
| — | 50.00 | — | — | ||
| ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : // Ridges plain (500 - 600mm) | — | — | — | 23,955.75 | |
| — | 600.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | — | — | — | 10,665 | |
| — | 600.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | — | — | — | 13,581 | |
| — | 20.00 | — | — | ||
| NEW TECHNOLOGIES AND MATERIALS // PREFAB/PRECAST TECHNOLOGY // Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. // 30 mm thick | — | — | — | 78,240.6 | |
| — | 10.00 | — | — | ||
| WOOD AND P.V.C. WORK // ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI MARKED) // Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : // 250x10 mm | — | — | — | 1,036.35 | |
| — | 30.00 | — | — | ||
| FLOORING // General // Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. // 18 mm thick | — | — | — | 17,875.35 | |
| — | 350.00 | — | — | ||
| FLOORING // VITRIFIED FLOOR TILES // Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. // Size of Tile 600x600 mm | — | — | — | 4,89,336.75 | |
| — | 350.00 | — | — | ||
| FINISHING // CEMENT PLASTER (IN COARSE SAND) // 12 mm cement plaster of mix : // 1:6 (1 cement: 6 coarse sand) | — | — | — | 1,08,249.75 | |
| — | 100.00 | — | — | ||
| FINISHING // 6 mm CEMENT PLASTER // Neat cement punning. | — | — | — | 7,195.5 | |
| — | 450.00 | — | — | ||
| FINISHING // PEBBLE DASH PLASTER // Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | — | — | — | 1,06,393.5 | |
| — | 500.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. // Old work (one or more coats) | — | — | — | 28,215 | |
| — | 500.00 | — | — | ||
| FINISHING // INTERIOR FINISHING // Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : // New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | — | — | — | 83,542.5 | |
| — | 400.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Finishing walls with water proofing cement paint of required shade : // New work (Two or more coats applied @ 3.84 kg/10 sqm) | — | — | — | 42,084 | |
| — | 200.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Applying priming coat: // With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | — | — | — | 12,132 | |
| — | 200.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Painting with aluminium paint of approved brand and manufacture to give an even shade: // One or more coats on old work | — | — | — | 17,280 | |
| — | 650.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : // Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | — | — | — | 1,13,314.5 | |
| — | 120.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : // Two or more coats on new work | — | — | — | 16,837.2 | |
| — | 120.00 | — | — | ||
| FINISHING // 6 mm CEMENT PLASTER // 6 mm cement plaster of mix : // 1:3 (1 cement : 3 fine sand) | — | — | — | 32,448.6 | |
| — | 200.00 | — | — | ||
| ALUMINIUM WORK // General // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : // For fixed portion // Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | — | — | — | 89,109 | |
| — | 200.00 | — | — | ||
| ALUMINIUM WORK // General // Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : // For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) // Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | — | — | — | 1,07,748 | |
| — | 60.00 | — | — | ||
| ALUMINIUM WORK // General // Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): // With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | — | — | — | 63,547.2 | |
| — | 250.00 | — | — | ||
| STEEL WORK // General // Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | — | — | — | 1,73,790 | |
| letter per cm height | per | — | — | ||
| — | 800.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Lettering with black Japan paint of approved brand and manufacture | — | — | — | 4,428 | |
| — | 15.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: // White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap | — | — | — | 30,055.72 | |
| — | 3.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. // 10 litre capacity - White | — | — | — | 3,214.76 | |
| — | 8.00 | — | — | ||
| ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. // Bend 87.5 degree // 110 mm bend | — | — | — | 1,082.52 | |
| — | 30.00 | — | — | ||
| ROOFING // RAIN WATER SPOUT AND PIPE // Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. // 110 mm diameter | — | — | — | 10,189.8 | |
| — | 3.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing white vitreous china water closet squatting pan (Indian type) : // Orissa pattern W.C. pan of size 580x440 mm | — | — | — | 8,556.43 | |
| — | 2.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. // Semi rigid pipe // 32 mm dia | — | — | — | 187.02 | |
| — | 2.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | — | — | — | 2,894.31 | |
| — | 3.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. // Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | — | — | — | 330.48 | |
| — | 3.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | — | — | — | 454.55 | |
| — | 3.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. | — | — | — | 626.26 | |
| — | 3.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. // 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | — | — | — | 1,914.16 | |
| — | 30.00 | — | — | ||
| WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work // 32 mm nominal dia Pipes | — | — | — | 11,842.2 | |
| — | 40.00 | — | — | ||
| WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work // 50 mm nominal dia Pipes | — | — | — | 28,593 | |
| — | 50.00 | — | — | ||
| WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work // 20 mm nominal dia Pipes | — | — | — | 12,343.5 | |
| — | 30.00 | — | — | ||
| WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work // 25 mm nominal dia Pipes | — | — | — | 9,595.8 | |
| — | 60.00 | — | — | ||
| WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) // 15 mm nominal dia Pipes | — | — | — | 15,487.2 | |
| — | 60.00 | — | — | ||
| WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) // 20 mm nominal dia Pipes | — | — | — | 18,090 | |
| — | 60.00 | — | — | ||
| WATER SUPPLY // C.P.V.C. PIPES // Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) // 25 mm nominal dia Pipes | — | — | — | 21,683.7 | |
| — | 3.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: // White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | — | — | — | 18,271.98 | |
| — | 3.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : // W.C. pan with ISI marked white solid plastic seat and lid | — | — | — | 17,591.99 | |
| — | 3.00 | — | — | ||
| WATER SUPPLY // BRASS FITTINGS // Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet // 150 mm diameter | — | — | — | 600.34 | |
| — | 500.00 | — | — | ||
| Litre | Per | — | — | ||
| WATER SUPPLY // C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES // Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | — | — | — | 4,950 | |
| — | 2.00 | — | — | ||
| WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. // 20 mm nominal bore, 120 mm long, weighing not less than 198 gms | — | — | — | 463.68 | |
| — | 10.00 | — | — | ||
| WATER SUPPLY // C.P. BRASS FITTINGS // Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : // 15 mm nominal bore | — | — | — | 4,561.2 | |
| — | 10.00 | — | — | ||
| WATER SUPPLY // C.P. BRASS FITTINGS // Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. // 15 mm nominal bore | — | — | — | 6,034.05 | |
| — | 5.00 | — | — | ||
| WATER SUPPLY // PTMT FITTINGS // Providing and fixing PTMT grating of approved quality and colour. // Circular type // 125 mm nominal dia with 25 mm waste hole | — | — | — | 233.32 | |
| — | 2.00 | — | — | ||
| WATER SUPPLY // AIR VALVE & WATER METER (BULK TYPE) // Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | — | — | — | 282.42 | |
| — | 150.00 | — | — | ||
| REPAIRS TO BUILDING // ROUTINE MAINTENANCE WORK // Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25 degreeC, 0.87 - 0.89 kg/litre and viscosity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23 degreeC as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150 degreeC. Cold flexibility shall be upto -2 degreeC when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : // 3 mm thick | — | — | — | 72,555.75 | |
| — | 3.00 | — | — | ||
| REPAIRS TO BUILDING // ROUTINE MAINTENANCE WORK // Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. | — | — | — | 362.07 | |
| — | 3.00 | — | — | ||
| REPAIRS TO BUILDING // ROUTINE MAINTENANCE WORK // Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge. // Orissa pattern W.C Pan of size 580x440 mm | — | — | — | 12,092.63 | |
| — | 3.00 | — | — | ||
| REPAIRS TO BUILDING // ROUTINE MAINTENANCE WORK // Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. | — | — | — | 1,158.57 | |
| — | 2.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : // Kitchen sink with drain board // 510x1040 mm bowl depth 250 mm | — | — | — | 12,502.08 | |
| — | 30.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | — | — | — | 9,427.05 | |
| — | 15.00 | — | — | ||
| REPAIRS TO BUILDING // General // Fixing old glass panes with wooden fillets (excluding cost of fillets) | — | — | — | 9,174.6 | |
| — | 10.00 | — | — | ||
| REPAIRS TO BUILDING // General // Refixing old glass panes with putty and nails | — | — | — | 6,568.65 | |
| — | 80.00 | — | — | ||
| DISMANTLING AND DEMOLISHING // General // Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: // Asbestos Cement sheet | — | — | — | 5,565.6 | |
| — | 120.00 | — | — | ||
| DISMANTLING AND DEMOLISHING // General // Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. // For thickness of tiles 10 mm to 25 mm | — | — | — | 7,927.2 | |
| — | 30.00 | — | — | ||
| DISMANTLING AND DEMOLISHING // General // Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : // Of area 3 sq. metres and below | — | — | — | 9,914.4 | |
| — | 5.00 | — | — | ||
| DISMANTLING AND DEMOLISHING // General // Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. // In cement mortar | — | — | — | 9,270.9 | |
| — | 5.00 | — | — | ||
| DISMANTLING AND DEMOLISHING // General // Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | — | — | — | 15,980.63 | |
| — | 5.00 | — | — | ||
| DISMANTLING AND DEMOLISHING // General // Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. // Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | — | — | — | 10,954.13 | |
| — | 10.00 | — | — | ||
| SANITARY INSTALLATIONS // General // Providing and fixing soil, waste and vent pipes : // 100 mm dia // Sand cast iron S&S pipe as per IS: 1729 | — | — | — | 10,367.1 | |
| — | 10.00 | — | — | ||
| WOOD AND P.V.C. WORK // COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER IS: 1378) // Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) // 250x16 mm | — | — | — | 1,743.3 | |
| — | 10.00 | — | — | ||
| WOOD AND P.V.C. WORK // COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER IS: 1378) // Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) // 150x10 mm | — | — | — | 535.05 | |
| — | 10.00 | — | — | ||
| WOOD AND P.V.C. WORK // BRASS FITTINGS // Providing and fixing bright finished brass handles with screws etc. complete: // 125 mm | — | — | — | 2,309.85 | |
| — | 50.00 | — | — | ||
| REPAIRS TO BUILDING // General // Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: // Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | — | — | — | 49,079.25 | |
| — | 20.00 | — | — | ||
| REPAIRS TO BUILDING // General // Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. | — | — | — | 1,304.1 | |
| — | 50.00 | — | — | ||
| REPAIRS TO BUILDING // General // Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. | — | — | — | 13,448.25 | |
| — | 50.00 | — | — | ||
| wheel | per | — | — | ||
| REPAIRS TO BUILDING // General // Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. // Wheel 50 mm dia and below | — | — | — | 5,566.5 | |
| — | 1000.00 | — | — | ||
| REPAIRS TO BUILDING // ROUTINE MAINTENANCE WORK // Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | — | — | — | 450 | |
| — | 10.00 | — | — | ||
| REPAIRS TO BUILDING // ROUTINE MAINTENANCE WORK // Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in- charge. | — | — | — | 2,592.9 | |
| — | 70.00 | — | — | ||
| FINISHING // EXTERIOR FINISHING // Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : // One or more coats on old work | — | — | — | 6,476.4 | |
| — | 120.00 | — | — | ||
| DISMANTLING AND DEMOLISHING // General // Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | — | — | — | 28,506.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
LetterregardingrecommendedlistofBrands_makeofmaterialsdated03.09.2025.pdf
ATTACHMENT
Updatedtenderdocument_151.pdf
ATTACHMENT
GCCACS14.07.2022-compressed.pdf
ATTACHMENT
CheckList_3.pdf
ATTACHMENT
JPOSTCables_1.pdf
ATTACHMENT
Annexure-X2.pdf
ATTACHMENT
NewAnnexure-IX-merged.pdf
ATTACHMENT
Annexure-XII_.pdf
ATTACHMENT
ColouredFinal_GCC_April-22_pdf_27.04.22_1.pdf
ATTACHMENT
Annexure-XI_11_2.pdf
ATTACHMENT
Annexure-XIV_1.pdf
ATTACHMENT
Annexure-IIIIII_3.pdf
ATTACHMENT
ACS11GCCWorks2026.pdf
ATTACHMENT
Annexure-IVVVIVIIVIII_2.pdf
ATTACHMENT
Annexure-XIII_1.pdf
ATTACHMENT
Spl.Condition.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .