Repair of glass house, Division of FLS at IARI PUSA, New Delhi-12.

Amount

Dismantling of MS jaali including pipes, angle etc. complete and stacking within 50 metres lead, as per the direction of engineer-in-charge.

Complete roof and side structure made of hollow GI section size 2mm thickness. A) 48 X 48 mm

Complete roof and side structure made of hollow GI section size 2mm thickness. B) 38x38mm

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

P/f U. V. Stabilized both side mulitiwall polycarbonate sheet 10mm thick triple wall of approved brand as desired by the client, the sheet shall be fixed using self drilling /self tapping screws with aluminium/G.I. profiles channels of F/U shape upto any pitch in horizontal/ vertical or curved surfaces and weather proof Neoprene for EPDM rubber gasket to fix the sheet. The open end of the sheet shall be sealed with anodised aluminium channel and with silicon sealent of approved make., including cutting, bending, hoisting in position of any size and shape wherever required, as desired by engineer-in-charge.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth)

P/f Aluminate ( Thermal ) net i/c making all necessary arrangements by manual rolling system.

Providing & Fixing of Shading Net 50% with Manual Rolling System on Top Side including all accessories, as per the direction of engineer-in-charge.

P/f exhaust fan of 18" size i/c making all necessary arrangements of approved quality as per the direction of engineer-in-charge.

P/f of cellulose cooling pad of 100mm thick, along with water circulation system including aluminium water collecting gutter, profiles to fix pads of approved brand i/c all fittings and accessories. .

PVC double layer water tank 500 liter of approved quality, as per the direction of engineer-in-charge.

P/f monoblock pump of 0.5HP i/c making all necessary arrangements of approved quality as per the direction of engineer-in-charge.

P/f pump of 1HP 3 phase i/c making all necessary arrangements of approved quality as per the direction of engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm nominal dia Pipes

White/Green colour, 50% shading net i/c making all necessary arrangements by manual rolling system.

It consists of electrical control panel (indian), which consist of MCB, relay, Contractors, Three way switch, Volt meter, RYB indicator with temperature and humidity sensor to operate fogging system and cooling system in Auto mode.

Complete electrical wiring with copper wire, MCB/Main switch/power points/ connections for pump/ exahust fans etc. as per requirement.

It consists of overhead, four way anti-leak foggers with 22-28 lph discharge which gives very fine drop lest size at spacing 2.5m X 2.5m, PVC pipe of 6 kg/cm2 pressure rating of various sizes, GI wire rope, air release valve, PVC ball valves Flush valves for flushing of sub-man, plastic disc filter, fitting and Accessories.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by truck of 5cum capacity, including loading, transporting, unloading to approved municipal dumping ground or approved by Engineer-in-charge.

RAJDEEP AGRI PRODUCTS PVT. LTD.

ALICE BIOTECH PVT. LTD.