GRAM SHEKPURA KE KABRISTAN KE PASS KASBA KHATAULI ME PASHUCHIKITSHALYA KE PRAGAN ME GRAM BHALWA KE MATA MANDIR KE PASS, GRAM SAHAPUR ME HARIJANO KE MANDIR KE PASS, GRAM AMBERPUR KE CHAURAHE PER SHIVAYE KE PASS, KHATAULI GRAMIN GURUDWAR ke pass mod ..

Supply and Fixing of 12.5 mtr High Mast Pole of approved make with Rising system, hot dip Galvanized inside & outside , having pole sheet thickness 3mm, top minimum100mm, bottom dia minimum 310mm, Base Plate 25mm thick, suitable for wind velocity as per IS 875 part 3. & having no circumferential weld, with Accessories for High Mast such as head frame suitable for 6 luminaries & its control gear boxes,0.75 HP Power tool motor, 3 point suspension system with steel wire rope 6mm dia , Double Drum winch Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers , anchor plates etc Complete in all respect. as per direction and satisfaction to the Engineer-in-charge As per SI No 651 of UPPWD Electricals Items Scheduled

Supply and Fixing of Factory Wired Integral LED flood light luminaires with die cast Aluminium housing built with dirver set suitable for 120 Watt. Confirming to IP 65 protection complete in allrespect. As per SI No 1453 of UPPWD Electricals Items Scheduled CAT AA

Supply and Laying of 10 Sqmm 2 core Aluminium Conductor PVC Insulated Armoured Served Sheathed Cables 1100 Volts grade at a depth of 750 mm below ground leve lover a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge,complete in allrespect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.As per SI No 501b of UPPWD Electricals Items Scheduled

Supply and Wiring of submains with two nos. of 4 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completionof the work as directed at site by Engineerin charge. As per SI No 289A of UPPWD Electricals Items Scheduled

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with Crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.As per SI No 725A of UPPWD Electricals Items Scheduled

S/F Information /sign board i/c all comp. at site.

Deduction 5% as per letter no. 273 dated 03.03.2025