WELCOME MAINTENANCE TO MD ACCN AND REPAIR REPLACEMENT OF CERTAIN B R ITEMS SUCH AS TILING SANITARY ITEMS FLOORING PLUMBING JOINERIES AND OTHER MISC ITEMS AT PHASE II ZONE B PH III UNDER GE I RD EAST BANGALORE

Amount

Taking down cement plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries / rubbish etc., complete all as specified and as directed.

Material and labour rendering (Internally) 15mm thick in cement mortar (1:6) on brick walls or on concrete surfaces, plastered surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling, etc., plastered surfaces finished even and smooth, without using extra cement, complete all as specified and as directed.

Material and labour preparing new plastered surfaces of walls and applying two coats of distemper oil emulsion of approved tint over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces on ceiling and applying three coats of white wash etc complete all as specified and directed.

Material and labour for preparation of old white wash surfaces and applying one coat of white wash on wall complete all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 6 above, but one coat of white wash on ceiling.

Material and labour Washing, rubbing down and stopping of of old distempered wall surfaces and applying one finishing coat of distemper oil emulsion of approved tint on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 8 above, but two coats of oil bound emulsion distemper.

Material and labour washing, rubbing down and stopping of distempered and painted surfaces of old distempered surfaces and applying one coat of distemper oil emulsion of approved tint on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 10 above, but two coats of oil bound emulsion distemper.

Material and labour for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 12 above, but two coats.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 14 above, but two coats of synthetic enamel paint on steel surfaces.

Material and labour for applying one coat of synthetic varnish on old wooden surfaces of any description over 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Repairing and refixing of shutters of any type not exc. 1 sqm each complete all as specified and as directed

Repairing and refixing of shutters of any type area exc 1 sqm but not exc. 2 sqm each complete all as specified and as directed.

Repairing and refixing of 15mm & 20 mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and as directed.

Material and labour welding in repairs n.exc. 2.5cm in length and thickness of metal to be welded exc. 20mm but n.exc. 25mm complete all as specified and as directed.

Material and labour welding in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded exc.20mm but n.exc 25mm complete all as specified and as directed.

Material and labour for grinding of old Terrazzo / Kota stone tile floor, skirting, marble / granite kitchen cooking plat form using machine with acrborandum of 220 to 350 grit and applying oxalic acid powder, machine fitted with hessain bobs and finally applied with wax polish complete all as specified and as directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frames) area exceeding 1.5 sqm but not exceeding 4.0 sqm etc complete all as specified and as directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frames) area not exceeding 1.5 sqm and removing to store etc complete all as specified and as directed.

Taking down shutters of any description area exc. 1 sqm ad n exc 2 sqm each etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

Supply and fitted to chowkats 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc,. (without sash bars) edges of framing plain , chamfered or rounded, fitted with cut and mitred beads for securing glass etc, 35 mm thick shutter, size of members of shutters as specified in SSR Part-I clause 8.20 (a) complete all as specified and as directed.

Supply and fix in repairs double action spring hinges,150mm size mild steel with steel wire spring, stove enamelled black complete all as specified and as directed by the Engineer in charge.

Supply and fix pressed steel door frames of size 105mm x 60 mm with one or more rebates manufactured out of 1.25 mm thick plain black mild steel sheet including necessary fixing lugs, hinges, lock strike plate etc all as specified and as directed.

Material and labour for Plain Cement Concrete (1:3:6), type C1 using 20 mm graded stone aggregate) for filling in pressed steel door frame complete all as specified and as directed.

Supply and fix second class hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc all as specified and as directed.

Supply and fix plain, framed, panelled shutter (any number of panels) of second class hard wood 30 mm thick, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc., complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS tube, supplying and fixing in opening as per specification and drawing.

Supply and fix factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick(styles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face and fixing in frame at site as per specification and drawing.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or aluminium wire staples complete all as specified and as directed by the Engineer in charge.

Supply and fix rolled mild steel sections as in bends straps etc as in hold fast and similar articles conforming to Fe 290 Gde-E-165 etc., complete all as specified and as directed.

Material and labour for preparing surface of wood and wood based material treating back of chowkats etc, area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each and treated with tar or coal tar black paint etc complete all as specified and as directed.

All as per Sl Item No. 37 here-in- before, but treating small articles such as hold fast etc area not exceeding 0.1 sqm each complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer etc complete all as specified and as directed.

Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) section as in window, ventilation, glazed with aluminium shutter, one or more rebates including joining clips for fixing, glazing clips, rubber beading screwed and handle including taking down old joinery complete all as specified and directed by EIC

Supply and fix sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane of 4 mm thick etc complete all as specified and as dircted

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc. 250 Ltrs but not exc. 500 Ltrs all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc. 500 Ltrs but not exc. 1000 Ltrs all as specified and as directed.

Dismantling floor, Granite tiles, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles and rubbish off the premises complete all as specified and as directed.

Material and labour for 15mm thick screed bed or bedding layer of cement mortar in CM (1:4) for laying floor finishes complete all as specified and as directed.

Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:3) as in backing coat for fixing of tiles as in dados/ skirting complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 300 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors complete all as specified and as directed

Material and labour for glazed ceramic tiles 300 x 200 x 7 mm jointed in cement slurry and pointed in white or coloured cement to match as in dados/skirting complete all as specified and as directed.

Material and labour for vitrified coloured ceramic floor tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Supply and fix granite tiles 20 mm thick, machine cut, bull nosed /rounded edge, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing etc over and including 15mm thick screed bed in CM(1:4) complete all as specified and directed.

Supply and fix 100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fix in repairs aluminium anodized barrel tower bolt 150mm long extruded section complete all as specified and as directed.

Supply and fix in repairs aluminium anodized barrel tower bolt 75mm long extruded section complete all as specified and as directed.

Supply and fix 150mm size aluminium anodized handle fabricated type anodised complete all as specified and as directed.

Material and labour prelaminated particle board 18mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutters for kitchen shelves/cupboards fixed in repairs complete all as specified and as directed.

All as per Sl Item No 56 above, but fixed in pelmet boxes.

Material and labour for external teak wood lipping 6 mm thick, fixed with nails fixed to particle board of 18 mm thick complete all as specified and as directed

Supply and fix in repairs 40mm dia cupboard knobs fixed with nut, screw and washers of brass, polished complete all as specified and as directed.

Supply and fixed in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and as directed.

Supply and fix in repairs tubular towel rail brass chrmoium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Supply and fix in repairs pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs chromium plated fancy type angular stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore all as specified and as directed.

Supply and fix in repairs stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.

Supply and fix in repairs Bib taps 15 mm bore cast copper alloy fancy type Chromium plated, screwed down, screwed for iron pipes complete all as specified and as diercted

Supply and fix in repairs Bib taps 15 mm bore cast copper alloy fancy type Chromium plated (Foam flow type) screwed down, screwed for iron pipes complete all as specified and directed.

Supply and fix in repairs brass chromium plated shower rose 125mm size complete all as specified and as directed.

Supply and fix Bib tap, fancy type (two way) chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed 15 mm dia fixed in repairs complete all as specified and as directed.

Supply and fix of Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections with necessary GI fittings and fixed in position complete in all respect all as specified and as directed.

Supply and fix in repairs viterious china wash down water closet pan (pedestal pattern), white including fixing bolt, trap, connecting to out going pipe and flush pipe, complete including PVC seat cover complete all as specified and as directed. MAKE :- Hindware/Parryware/Cera

Supply and fix in repairs vitreious china squatting pan, 'Orissa' pattern of size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as dircted MAKE :- Hindware/Parryware/Cera

Supply and fix in repairs 10 Ltr capacity PVC symphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and as directed

Supply and fix in repairs viterious china wash basin, white, flat back, size 550 x 400 mm complete all as specified and as dircted. MAKE :- Parryware / Cera / Hindustan

Supply and fix in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 200mm all as specified and as directed.

Supply and fix in repairs plastic water closet seat cover black or white, closed pattern with flat bottom and cover and mild steel, chromium plated or aluminised or PVC hinging device complete all as specified and as directed.

Supply and fix powder coated aluminium frame / shutter for doors, windows, ventilators with one or more rebates including joining cleat for fixing, rubber neoprene packing for fixing, including minor fittings like lock, handle, roller for sliding etc. complete all as specified and as directed. NOTE :- (i) For payment purpose weight of aluminium section shall only be measured. (ii). Cost of aluminum mongeries, lock, rubber packing, roller for sliding are included in the quoted rate. (iii) Sheet glass and wire gauge shall be measured and paid separately.

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frame, concrete or brick surroundings, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty, or beading and necessary clips as in squares n.exc. 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs complete all as specified and directed.

MAYDINI CONSTRUCTION CO

Meghana and Gowda Enterprises

Solar Electricals and Electronics

Moulya Builders

VP DEVELOPERS AND CONTRACTOR

ARCHANA CONSTRUCTION CO

yuvan constructions