DAY TO DAY B/R MAINTENANCE SERVICES AT AREA III (NML AREA) OF AGE B/R (CENTRAL) AND REPAIR/MAINT OF LIFT ROOM AND SHAFT INCLUDING WATER PROOFING OF LIFT PITS UNDER GE (W) COLABA, MUMBAI

Amount

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site all as specified and directed. Note : Up to fourth floor.

All as per item No. 1 above but 5th to 8th floor all as specified and directed.

All as per item No. 1 above but 9th to 12th floor all as specified and directed.

All as per item No. 1 above but 13th to 16th floor all as specified and directed.

M&L 5 mm thick rendering plaster in cement mortar 1:3 on ceiling surfaces, finished surfaces even and smooth without using extra cement in any height of building all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick wall or concrete surfaces, finished surfaces even and fair all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) mixed with in liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, finished surfaces even and fair all as specified and directed. Note :- Upto fourth floor

All as per item No. 7 but 5th to 8th floor all as specified and directed.

All as per item No. 7 but 9th to 12th floor all as specified and directed.

All as per item No. 7 but 13th to 16th floor all as specified and directed.

Supply only liquid integral water proofing compund.

M&L 1.5 mm thick wall care putty on old/ new wall Surfaces all as specified and directed.

M&L 1.5 mm thick wall care putty on old/ new ceiling Surface all as specified and directed.

M&L for preparation of old/ newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer only of approved shade all as specified and directed. Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE .

M&L for preparation of old/ newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat primer only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE.

Providing & applying anti algal water-based Elastomeric exterior wall finish on old as well as newly plastered surfaces including surface preparation, applying suitable wall Prime seal primer 8-10 Sqm per ltr coverage area and application of two coats (base coat 4.2 -4.7 & top coat 6-6.5 sqm per ltr coverage area ) & of paint by roller all as specified and directed. Make- Dr Fixit Rain coat classic, Asian paints, Berger

M&L for Rebuilding the section of damaged RCC elements to its original size including demolition or as per consultants recommandations in thicknesses of 40-100 mm by providing and casting with micro concrete of grade M-40 and above including use & waste of water tight foam faced finish shuttering of minimun 18 mm thick with supporting frame work, all lead & lift, mixing, placing, deshuttering, levelling the surface by grinding off cementitious slurry or construction joint differences if any to satisfaction of engg. incharge, curing etc. complete.(Rate including- cube test to be conducted for every 5 M.T. workdone.6 no's of sample required per test). Ensure the quality of water by testing water as per IS 456 and document the same. Ensure temperature at time of mixing should be between 25 to 40 degree celcius by electronic temperature gauge Name of Manufacturer: BASF/Fosroc/Sika/ Dr Fixit

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and directed.

M&L for mild steel TMT bars any dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed.

Taking down door chowkhat with shutter area exc 1.5 Sqm but n-exc 4.00 sqm each (without taking off shutters from the frame) all as specified & directed.

Taking down door chowkhat with shutter area n exc 1.5 Sqm each (without taking off shutters from the frame) all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 50 X 100 MM size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed Make for (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 28- 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges shall be paid separately

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple 150 mm (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple 150 mm (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

S&F Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 100mm size fixed with necessary screw or welding as required all as specified and directed.

S&F 150 mm long handles, anodised extruded aluminium aloy, fixed with screw all as specified and directed.

S&F Aluminum, anodized, barrel tower bolts of extruded section 150 mm long all as specified and directed.

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

S&F aluminium grill of 7.5mm x 5.2mm bars of opening as per design No DG No 103 of M/s Decogrille/ RG-103 of M/s Royal Grill fixed with aluminium channel 'F ' 20mmx15mm fixed in position with screw all as specified and directed.

S&F galvanised M S Wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane all as specified and directed.

S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane all as specified and directed.

S&F in repairs Steel rolling shutters 1.25 mm thick lath thickness, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle all as specified and directed.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed.

S&F in repairs Ball bearing for rolling shutters all as specified and directed.

M&L for servicing/greecing and minor repairs of existing rolling shutters/lock/ball bearing of any Size and in any positiong including Opening and Refixing in the same position all as specified and directed.

M&L for preparation of old wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over red oxide zinc primer all as specified and directed.

Roughening the surfaces of old concrete surfaces or demolition/taking down existing roof treatment incl PCC padding by picking sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and PCC padding any thickness and brushing neat with cement slurry @ 3 Kg/Sqm including 15 mm thick screeding in CM (1:4) finished surfaces even and smooth mixed with water proofing compound all as specified and directed. (WPC shall be measured and paid separately)

M&L for applying bituminous primer on roof surfaces conforming to IS-3384 of 1986 @ 0.70 kg/Sqm and applying APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with non -woven polyester matt laid on primed surface by torch application all as specified with overlap of 10 cms (overlaps to be thermo fused by flame) all as specified and directed.

M&L PCC padding 1:2:4 type B-0 of uniform thickness 25 mm top surface of plain cement concrete padding shall be furnished even and smooth w/o using extra cement all as specified and directed.

M&L for one coat of aluminium paint at the rate of 100 gm/Sqm as per manufacturer's instructions laid over bituminous layer all as specified & directed at site.

M&L PCC 1:2:4 type B-0 as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and directed.

Dismanteling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

S&F Solid PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S&F for Anodised aluminium snap grid frame work for false ceiling including hanging arrangement for receiving of PVC ceiling all as specified and directed.

S&F PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing

Demolition of stone slab and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for Black Granite (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulding, cutting and polishing all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over 15 mm thick cement screed 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

M&L for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish all as specified and directed.

Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles and removing debris out of MD land all as specified and directed.

M&L HD ceramic coloured digital tiles 7-8 mm thick (square/rectangular) are of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc. set and jointed in neat cement slurry laid over 15 mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match all as specified and directed.

M&L HD ceramic coloured digital tile 7-8 mm thick (square/rectangular) are of each tile exc 0.18 sqm but not exc 0.38 sqm in skirting/dado etc. set and jointed in neat cement slurry laid over 10mm thick rendering in cement mortar 1:4 and pointed in white or coloured cement to match the shade of the tiles all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MoD land all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 all as specified and directed.

Empolying One Plumber and One helper for plumbing & sanitary works on all working day from 0900 Hrs to 1700 Hrs in area II of AGE B/R central with all plumbing smart tools all as specified and directed

Empolying One Carpenter and One helper for Joinery & carpentry works on all working days from 0900 Hrs to 1700 Hrs in area II of AGE B/R central with all necessary smart tools all as specified and directed

S&F in repairs 15mm bore bib taps cast copper alloy fancy type with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed

S&F in repairs bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.

S&F in repairs 15mm bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms all as specified and directed.

S&F in repairs Chromium plated brass angle valve for 15mm bore pipe, fixed in repairs all as specified and directed.

S&F in repairs, two way angle valve cock chromium plated brass fancy type bore 15mm all as specified and directed.

S&F in repairs two way bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.

S&F in repairs rubber door seal 32 mm wide with aluminium strip of size 19mm wide fixed with machine steel with washer all as specified and directed.

S&F in repairs Chromium plated brass shower rose 75 mm dia with arm swivel joints, as per sample kept in GE's office all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore all as specified and directed.

Taking up or down steel tubing 15mm bore pipe and connections including cleaing for refixing or removal from site all as specified and directed.

Taking up or down steel tubing 20mm bore pipe and connections including cleaing for refixing or removal from site all as specified and directed.

Taking up or down steel tubing 40-50 mm bore pipe and connections including cleaing for refixing or removal from site all as specified and directed.

S&F 15mm bore, steel water tubing, medium grade, galvanised with all fitting and fixed to walls and ceiling or laid in floors all as specified and directed.

S&F 20 mm bore, steel water tubing, medium grade, galvanised with all fitting and fixed to walls and ceiling or laid in floors all as specified and directed.

S&F 40 mm bore, steel water tubing, medium grade, galvanised with all fitting and fixed to walls and ceiling or laid in floors all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket complete all as specified and directed.

S&F in repairs PVC flush pipe 32 mm dia, for low level flushing cistern all as specified and directed.

S&F in repairs plastic seat cover black/white premium quality of pattern W.C including fixing divice and Chromium plated nuts all as specified and directed.

S&F in repairs vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe and making good to floor all as specified and directed.

S&F in repairs vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe and making good to floor all as specified and directed.

S&F in repairs flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts all as specified and directed.

S&F in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts all as specified and directed.

S&F in repairs PVC grating doom 125 mm dia with hole fixed to floor /tarp with cement all as specified and directed.

S&F in repairs PVC waste pipe 32 mm dia, 60 cm long for WHB with cup all as specified and directed.

S&F in repairs PVC waste pipe 40 mm dia, 60 cm long for sink with cup all as specified and directed.

S&F in repairs Stainless steel waste coupling for S.S Sink 75 mm to 100mm dia set with rubber washer plug all as specified and directed.

S&F in repairs sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 CM wide with CP bracket guard and railing 60 cm long all as specified and directed.

S&F in reapirs Aluminium anodised handles of extruded section 125 mm long all as specified and directed.

S&F in repairs Aluminum, anodized, barrel tower bolts of extruded section 150 mm long all as specified and directed.

S&F in repairs Aluminum, anodized, barrel tower bolts of extruded section 100 mm long all as specified and directed.

S&F in repairs aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F in repairs Butt hinges medium weight, cold rolled mild steel 100mm size fixed with necessary screw or welding as required all as specified and directed.

S&F in repairs Butt hinges medium weight, cold rolled mild steel 75mm size fixed with necessary screw or welding as required all as specified and directed.

S&F in repairs vitreous china wash basin, white flat back size 550 x 400 mm excluding chain and plug and porcelain stopper but including brackets all as specified & directed including 32 mm bore CP based fittings and PVC waste pipe suitable for 32mm bore all as specified and directed.

S&F in repairs Aluminum, anodized, hasp and staple safety type 125 mm size all as specified and directed.

S&F in repairs 250 mm mild steel sliding door bolts, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts all as specified and directed.

S&F in repairs mild steel , barrel tower bolts 200 mm long all as specified and directed.

S&F in repairs mild steel, pressed handle oval type stove enamelled black 150mm size all as specified and directed.

S&F in repairs mild steel, pressed handle oval type stove enamelled black 125mm size all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins all as specified and directed.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane all as specified and directed.

S&F figured glass 3 mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane all as specified and directed.

S&F in repairs tubular towel rail of Aluminium anodised plated, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S&F in repairs 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate all as specified and directed.

S&F in repairs 25 mm dia mild steel PVC coating desinger drapry/ curtain rod all as specified and directed.

S&F mild steel PVC coating bracket/ holder for drapry rod fixed with screws all as specified and directed.

M&L in repairs for 2nd class hardwood beads sectional area n.exc 3 Sqcm for glazed or gauged Joinery, ceiling including secured with nails all as specified and directed.

M&L in repairs for Block board 18/19 mm thick, grade 2 quality, interior grade, commercial type, fixed with nails/screws sin cup board shutter/pelmets or to timber frame work all as specified and directed.

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) all as specified and directed.

S&F in repairs PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110mm bore all as specified and directed.

S&F in repairs PVC (SWR) bends any radius, 110 mm bore all as specified and directed.

M&L mild steel brackets of 35 x 35 x 5 mm 45 cm long including cutting holes in wall and fixed with cement concrete 1:2:4 including making good facing all as specified and directed.

S&F in repair toilet paper holder SS with flat recessed type, superior quality all as specified and directed.

S&F in repair CP brass, soap dish, superior quality all as specified and directed.

S&F in repairs Stainless steel sink 1 mm thick with drainage board for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm all as specified and directed.

S&F in repairs Stainless steel sink 1.00 mm thick for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm all as specified and directed.

S&F in repairs Health foucet including PVC pipe 1.50m long with brass nuts for EWC all as specified and directed.

S&F in repairs brass pad Lock, 6 lever of size 100 mm suitable for Aluminum doors all as specified and directed. Make Godrej/Link

Taking down Aluminium/wooden shutters of any description exc 1 Sqm and not exc 2.50 Sqm each and refixing in the same opening after easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws all as specified and directed.

S&F in repairs PVC mirror cabinet, coloured of size 300 x 450 mm fixed with screw and PVC gutty on wall all as specified and directed. Make:Prayag Cat part No : 551 or equvilent as approved.

S&F 18/19 mm thick Both Side pre laminated MDF Board of any colour, Matt surface finish, grade I as per IS 14587, for frame and shutter for kitchen cabinets all as specified and directed by Engr-in-charge. Make:- Tesa, Greenply and archidply

S&F in repairs first class hard wood external teak wood leaping, 6mm thick to 18-19 mm thick block board or veneered particle board, fixed with nails all as specified and directed.

M&L in repairs 2nd class hard wood (Sal) plain fillets square rectangular or triangular in section clean swan secured with nails or brads sectional area exc 6 but not exc 13 sq cm all as specified and directed

M&L in repairs 2nd class hard wood (Sal) plain fillets square rectangular or triangular in section clean swan secured with nails or brads sectional area exc 13 but not exc 25 sq cm all as specified and directed

S&F for continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter all as specified and directed.

S&F 100 mm long handles anodised aluminium aloy, fixed with screw all as specified and directed.

S&F ply wood 6 mm thick, 5 ply, grade BWP, type BB, fixed with screws to timber frame work all as specified and directed.

S&F Telescopic channel/slider, 450mm long extruded MS galvanised over rollers of approved make all as specified and directed.

Dismantling water storage tank exc 250 & n’ exc 500 ltr capacity all as specified and directed.

Dismantling water storage tank exc 1000 & n’ exc 2000 ltr capacity all as specified and directed.

Dismantling water storage tank exc 2000 & n’ exc 4000 ltr capacity all as specified and directed.

S&F 500 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc all as specified in SSR part I

S&F 1000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc all as specified in SSR part I

S&F 2000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc all as specified in SSR part I

S&F 4000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc all as specified in SSR part I

S&F in repairs Ball Valves 40 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 40mm-690gms) all as specified and directed.

binta construction

Panther Facilities

Unitech Enterprises

GANGAJAL

NATH CONSTRUCTION

PRABHU ASSOCIATES

Vandan Enterprises

Bidder Name

Unitech Enterprises

NATH CONSTRUCTION

SHRI SAI ENTERPRISES

Vandan Enterprises

PRABHU ASSOCIATES

Panther Facilities

GANGAJAL

binta construction