Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAccepted-AOC | L1 | Accepted-AOC ACCPETED | |
| 2 | L2₹13.9 L+₹38,655.68 (2.85%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Highest | |
| 3 | L3₹14.3 L+₹78,855.82 (5.82%)Rejected-Finance | L3 | Rejected-Finance Highest | |
| 4 | L4₹14.4 L+₹81,522.07 (6.01%)Rejected-Finance UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance Highest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
Military Engineer Services, Jalipa Military Station, Garrison Engineer (Army), Barmer, PIN 344001
REPAIR TO CERTAIN MISC B R AND E M WORK AT TEMP BUILDINGS AT JALIPA MIL STN UNDER GE ARMY BARMER
2022_MES_554553_1
8660/E8
Open Tender
Civil Works
Item Rate
330 days
GE ARMY BARMER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY BARMER
₹30,000
7 Dec 2022
27 Sept 2022
26 Oct 2022
27 Sept 2022
25 Oct 2022
11 Oct 2022
Amount
M&L for Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Fixing only Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet except sheeting any thickness of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .
M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .
M&L for Dismantling boarding, any description, fixed with screws and providing and fixing 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing in any position complete all as specified and directed.
M&L for Dismantling boarding, any description, fixed with screws and providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructionsin any position with nails complete all as specified and directed.
M&L for Dismantling boarding, any description, fixed with screws and providing and fixing 12 mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in ceiling, flat or sloping with staples on snap grid as per manufacturers instructions in any position complete all as specified and directed.
M&L for Dismantling boarding, any description, fixed with screws and providing and fixing 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping in any position complete all as specified and directed.
S&F Anodised aluminium snap grid frame work of grid size 605 x 605 mm for false ceiling complete all as specified and directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
M&L for Dismantling framed trusses of span n. exc 10 mtr complete all as specified and directed.
M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Steel work in tubular (Square/rectangular/circular hollow section) in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed .
S&F mild steel framed work as Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc and fixing complete all as specified and directed.
S&F mild steel framed work as in framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
M&L for Demolition of wall stone/brick/PCC block masonry built in cement mortar including all quoins arches pillars etc complete all as specified and directed.
M and L for Pre-cast cement concrete type C-1 (1:3:6) block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete set in CM (1:6) etc complete all as specified and directed .
M&L for cement plaster 15mm thick in CM 1:6 on internal wall surface of stone wall etc finished even and smooth without using extra cement complete all as specified and directed.
M&L for cement plaster 15mm thick in CM 1:4 on external wall surface of stone wall etc finished even and smooth without using extra cement complete all as specified and directed.
M&L for Demolition of floor (cement concrete and stone tiles) in ground floor and paving n.exc 15 cm thickness including removing of debris to out side MD land complete all as specified and directed.
M&L for priming coat of concrete/plaster surface with bituminous primer at 4 Kg per 10 sq metre complete all as specified and directed .
M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) laid on primed surface by torched application and as per manufacturer instructions complete all as specified and directed.
M&L Cement concrete Type E2 1:5:10 (40 mm graded aggregate) in foundations, filling and mass concrete as in sunken floor complete all as specified and directed .
M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 graded stone aggregate as in sub base of floor complete all as specified and directed.
M&L non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat ement slurry and pointed in white or coloured cement to match including 15mm thick cement screed bedding layer in CM 1:6 complete all as specified and directed.
S&F Light shade vitrified ceramics tiles 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.
S&F Dark shade vitrified ceramics tiles 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.
S&F Green marble work 18 to 20mm thick (table rubbed and polished) as in floors and like over 20mm thick screed bed in cement mortar (1:4) including grinding, polishing, rounding edge etc complete all as specified and directed.
M&L 18 to 20 mm thick granite stone slab machine cut bedded and jointed with grey cement slurry and pointed with white cement or coloured cement to match the colour of granite for WHB platform/window cills over 20mm thick screed bed in cement mortar (1:4) including grinding, polishing, rounding edge etc complete all as specified and directed.
M&L for Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing from site complete all as specified and directed.
M & L for coloured glazed cermic tiles size 300x450x7 mm thick on vertical surface of wall over and including 10mm thick rendering/backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement/coloured cement to match the tiles complete all as specified and directed .
Taking down GI steel tubing of 15mm bore pipe and connections complete all as specified and directed.
Taking down GI steel tubing of 25mm bore pipe and connections complete all as specified and directed.
Supply and laying of CPVC pipes 16 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.all directed.
Supply and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.all directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F stack clamps for 100/110 mm bore pipe out of 50mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed
S&F stack clamps for 75 mm bore pipe out of 50mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed
S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed
S&F 110 mm bore PVC (SWR) bends any radius with door complete all as specified and directed
S&F 75 mm bore PVC (SWR) bends any radius with door complete all as specified and directed
S&F PVC (SWR) vent cowl suitable for 110mm bore pipe complete all as specified and directed
S&F PVC (SWR) floor trap of 75 mm outer dia, plain with grating including jointing with solvent cement complete all as specified and directed
S&F rotational moulded polyethylene water storage tanks 500 litre capacity three layered any colour as approved (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I inluding dismantling existing PVC water tanks of any type and capacity complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks 1000 litre capacity three layered any colour as approved (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling existing PVC water tanks of any type complete all as specified and directed.
Taking down chowkhat or frame with shutter (without taking off shutter from the frames) n. exc 1.5 Sqm each of steel window/wooden door/PVC door/ventilator complete all as specified and directed.
S&F solid PVC door frame of size 50 x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying nd fixing in opening as per specification & drawing complete all as specified and directed.
S&F butt hinges 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed type complete all as specified and directed.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm long aluminium handles, cast type, anodised complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specified and drawing complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of wall and distempering with two coat of distemper oil emulsion over a coat of primer with alkali resistant priming paint complete all as specified and directed.
M&L for Complete removal of existing surfaces of wall and distempering with two coat of distemper oil emulsion over a coat of primer with alkali resistant priming paint complete all as specified and directed.
M & L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
S&F in repair vitreous China wash hand basin of size 550x400 mm with CI bracket and comprising of the following complete all as specified and directed :- (a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed. (b) 15 mm bore Pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down, high pressure with or without leltered hot or cold with long screwed shank and fly nut. (d) PVC Connection 15mm size with PTMT nuts of length 450mm long.
S & F CP Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) complete all as specified and directed. Make: Model No.ALD- 579 of JAQUAR or equivalent model in Kohler/ Grohe
S&F in repair soap dish holder complete all as specified and directed. Make: Cat No. ACN-1131N of Jaquar or equivalent model in Kohler/Grohe
S&F in repair Toilet roll holder complete all as specified and directed. Make: Cat No. ACN-1151N of Jaquar or equivalent model in Kohler/Grohe
S&F in repair PVC connections 450mm long, 15mm size with PTMT nuts for flushing cistern, gysers etc complete all as specified and directed.
S&F in repair vitreous china squatting pan "Orissa' pattern size 580x440 mm with 'P' or 'S' trap, white with integral foot rest complete all as specified and directed.
S&F for vitreous china wash down water closet pan / padestal pattern white with following accesseries and including taking down existing vitreous china wash down water closet pan complete all as specified and directed: - (a) PVC seat cover with fixing bolts. (b) JET CP steel for EWC Spray.
S&F stainless steel plate rack 600x750x250mm made of stainless steel 1mm thick sheet and fixing with plug screws incl making good disturbed surface in CM (1:3) complete all as specified and directed. Make : Prayage/Nirali or equivalent make.
S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets, complete all as specified and direcetd .
S&F in repair brass chromium plated angle valve/stop valve quarter turn suitable for 15 mm bore pipe complete all as specified and direcetd .
S&F in repair, bib tap fancy type chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed
Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and direcetd.
S & F in repairs 900 mm long , 32mm dia PVC waste pipe fixed to kitchen sink/wash hand basin complete all as specified and directed . Make : Prayag/Cera or equivalent.
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and directed . Make : Cera/Prayag or equivalent
S&F in repair tubular towel ring brass chromium plated, 20mm dia, fixed with chromium plated brass screws complete all as specified and direcetd . Make : Cera/Prayag or equivalent
S &F chromium plated shower roses with or without swivel joints, 125mm in size including fixing to steel pipe or union complete all as specified and directed.
M&L complete removal of existing finishes on old painted steel surfaces and applying 2 coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.
M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation complete all as specified and directed.
M&L preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed .
Taking down chowkhat or frame with shutter (without taking off shutter from the frames) exc 1.5 Sqm but n.exc 4 sqm of steel window/wooden door/PVC door complete all as specified & directed
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
M&L for Running welding in repairs for thickness of metal to be welded n. exc 6mm complete all as specified and directed.
S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over 25 mm thick sand cushioning spreading and levelling under floor complete all as specified and directed.
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty or fixed in window frame rubber packing in square n exc 0.5 sq. m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick Figured glass, pin head type and glazing with oil putty or fixed in window frame rubber packing in squares n exc 0.5 sq. m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M/s Malinath Electricals
Kusum Traders
M/S Tanisha Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .