Estimate for Construction of Head Regulator of Machhiwara Disty Offtaking at Rd 8900/L of Sodhiwala Disty

Amount

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 Height upto 5m With Batching Plant, Transit Mixer and Concrete Pump (CSR Item no: 21.32 f/a/i).

RCC Grade M25 Height upto 5m With Batching Plant, Transit Mixer and Concrete Pump (CSR Item No. 21.4 )

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M20 Height upto 5m With Batching Plant, Transit Mixer and Concrete Pump (CSR Item no: 21.32 (E/a/i).

PMastic Asphalt 25mm thickness Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen 85/25 or 30/40 @10.2%, fine aggregates, coarse aggregates, lime filler @ 17.92% of total mix, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surface is not less than 100 degree C, protruding 1 mm to 4 mm over mastic surface complete as per technical clause 516 of MORT&H specifications.

Furnishing and placing reinforcement / prestressed cement concrete RCC Grade M-25 for solid slab by using concrete Mixture ht.upto 5 m as per Drawing and Technical specification including shuttering & centering (CSR item no. 22.1 (B (i) )

Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and Technical Specifications (CSR item no. 21.33)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. A- Mechanical Means B- Depth upto 3 m (CSR Item No. 21.1)

Extra for compaction of earth including laying earth in 20 cm layers , watering and rolling in specification. (csr no 24.5/b)

Dressing of bed/Side slopes and prepration of sub grade for lining complete in all respect as per PWD specification and instruction of engineer in charge.(csr no 19.2)

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 10 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (dia 22) (100/44)

Supply, Providing and fixing of steel Bolts & nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects. CSR 18.15

MS Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects upto 0.5 Ton capacity

M.S Spindle with double start or triple start threading 11‘ Height 1/3/4" dia. up to 1.50 ton capacity.

Supply and fixing of spindle cover

Providing & fixing clamp plate, complete in all respects.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface. Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Providing and fixing Skin Plate 8 mm

Providing and fixing ISMC

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel

Supply of multi grade mobile oil.

Providing and fixing of chequred plate 8mm

Providing and fixing M.s Plate i.e Stiffner Plate, , Top Base Plate, bottom base plate, ladder base plate, Square bar, flat plate Etc

Providing and fixing ISMB 150 mm @ 14.9 kg/meter

Fixing and Holding the gate with the help of 35 tonne capacity crane.(including GST)

Providing and fixing Sqaure hollow section

Providing and fixing Stainless steel flat, complete in all respescts.

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge (/mm depth)

Any Other Item

THE JAND WALA COOP L AND C SOCIETY LTD