Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (Balance Work)

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (Civil Works)

Earth work in surface excavation by manual means for lowering & levelling the ground by chiselling and wedging in Hard rock for all works other than foundation & depth ...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete with all lead

Ruled / Flush pointing on Sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) : 1/2 marble dust}....

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

Providing Brick work with common burnt clay machine moulded perforated bricks of clasS designation 5.0 conforming to IS: 2222 in superstructure above plinth level in c...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of ce...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end ...

Providing& fixing of Openable window made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and le...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per direction...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to giv...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, fac...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm di...

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

Food Graded water proofing Membrane - Providing and laying water proofing treatment to the Water tanks & Liq- uid Retaining structures with two component acrylic polymer modified cementitious waterpro...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners where...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work - Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint confor...

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

Water Bound Macadam - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand ...

Dry Lean Cement Concrete Sub-base - Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse...

Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid using Paver - Construction of M30 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base wi...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...

supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engi...

Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as ...

supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, c...

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity ai...

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per re- quirement, all complete for borewell of: 200 mm dia -...

Providing and fixing M.S. clamp of required dia to the top of casing/ hous- ing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. - 200 mm clamp --...

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom

of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia ---- etc., complete with all lead

Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply ...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...

Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

KSRB 4.2.11 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 27.20kgs, with 12mm and down size graded granite metal coarse aggregates @0.5865cum and fi...

Providing and fixing RCC slabs 5 cms thick for wall shelves with 12mm and down size jelly cement concrete design mix M20 including CM 1:3 plaster finishing, curing etc., complete (excluding the cost o...

Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply package internally finished with enamel ...

KSRB 10-3 :Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc , consisting of following app...

Foot steps 15" x 14" Heavy ---- etc., complete with all lead

Manufacturing, supplying and fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded water proof block board, shutters allround ward robe, lockable drawers with sliding channels, cupboard ...

Providing and fixing polished granite sink of size 60cms x 60cms of 23cm thick, the sink portion shall be 15cm in depth of shapes oval/round/square over brick masonry in cement mortar 1:6 including co...

Providing and fixing stainless steel staircase railing with hand rail 50mm dia 16 gauge hollow pipe welded to vertical hollow 50mm dia pipe of 16 gauge, stainless steel vertical pipe spaced at 1.20 m ...

Providing & Fixing of Hold fast MS to wall including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead

Providing and fixing Aluminium fixtures like Aldrops of size 300 x 16 mm, Tower bolts of size 200 x 12 mm, Latches of size 250 x12 mm, 100 mm length oxidized Iron Hinges, Handles of size 150 mm, Door ...

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (Water Supply & Sanitary Works)

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Economy ---- etc., complete with all lead

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931. ---- etc., complete with all lead

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- etc., complete with all lead

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- etc., complete with all lead

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern w...

Providing and fixing gun metal non- return valve of approved quality

(screwed end) : 25 mm nominal bore - Horizontal ---- etc., complete with all lead

KSRB13-9.2 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall...

KSRB13-9.3 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall...

KSRB13-9.9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall...

KSRB13-8.9 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter raising mains & exposed distribution pipes with special...

Drilling holes of 2.50 cms dia (roof/chajja/stone). in slabs upto 7.50 cms thick

---- etc., complete with all lead

Drilling holes of 2.50 cms dia (roof/chajja/stone). in slabs upto 10 cms thick

---- etc., complete with all lead

Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by applicatio...

Supplying and fixing Elbow operated taps of approved quality with necessary white lead and thread etc.,complete as per directions of Engineer-in-charge of the work. ---- etc., complete with all lead

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (Electrical Works)

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copp...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copp...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copp...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copp...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copp...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected

accessories on existing modular switch plate as per IS 3854

and IS 1293. Using Group "A" materials 6Amps one way. ---- etc., complete with all lead

Supplying and fixing of modular switch & connected

accessories on existing modular switch plate as per IS 3854

and IS 1293. Using Group "A" materials 6Amps 3way socket. ---- etc., complete with all l...

Supplying and fixing of modular switch & connected

accessories on existing modular switch plate as per IS 3854

and IS 1293. Using Group "A" materials Stepped Fan Regulator Two Module ---- etc., compl...

Supplying and fixing of modular switch & connected

accessories on existing modular switch plate as per IS 3854

and IS 1293. Using Group "A" materials 32Amps DP switch ---- etc., complete with all le...

Supplying and fixing of modular switch & connected

accessories on existing modular switch plate as per IS 3854

and IS 1293. Using Group "A" materials 6/16Amps universal socket ---- etc., complete wit...

Supplying and fixing of modular switch & connected

accessories on existing modular switch plate as per IS 3854

and IS 1293. Using Group "A" materials TV/Telephone socket ---- etc., complete with all ...

Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead

Supplying and fixing of metal clad industrial plugs and sockets. 2pole+earth 250V PLUG 32A ---- etc., complete with all lead

Fabricating supplying and mounting MS box made out …

SWG suitable for floor / wall mounting, fully weather proof

with provision for better heat dissipation, provided with

hinged front cover, equippe...

Supplying and fixing miniature circuit breakers on existing

MCB distribution boards using necessary fixing materials

and 'C' Type curve, indicator ON/OFF, energy cross-3 with

Short circuit breaking ca...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running be...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running be...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running be...

Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cuttin...

Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cuttin...

Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cuttin...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board. 16-25 Amps 2 pole ---- etc., complete with all lead

Supplying, fixing, wiring, earth electrode for grounding

conduits, I.C. cutouts and other equipment's on the meter

board using 40mm dia 2.90mm thick GI pipe 2.5 mtr

long buried in a pit … The pit sh...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 25 x 3 mm GI strip ---- etc., complete with all lead

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 50 x 6 mm GI strip ---- etc., complete with all lead

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 cor...

Labour charges for laying of 1.1 KV class UG cable in

existing trench GI pipe / stoneware pipe / on wall / on pole

as required. 2.5 to 25 Sqmm ---- etc., complete with all lead

Supplying and fixing of heavy duty cable glands suitable for

UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete with all lead

Supplying of recess mounting non integrated type LED down

light...... W luminaire comprising of pressure decast/ extruded

aluminium housing, with spring loaded false ceiling clamps, LED of

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power I...

Supplying of recess mounting non integral type ........ LED w

luminaire comprising of pressure decast/extruded aluminium housing,

with spring loaded false ceiling clamps, Power LEDs with CCT 6500

Supplying and fixing of LED Bulkhead of 10W with IP65 protection

and IK 08 impact resistance suitable for surface and wall mounting

applications. ---- etc., complete with all lead

Supply of LED Streetlight luminaire with pressure die cast aluminium housing

body for optimal thermal dissipation. Lamp compartment comprising of anti

glare clear diffuser with Injection moulded polyc...

Supplying of 1440rpm heavy duty exhaust fan with bracket

blades suitable to operate on 230V 50Hz, AC Supply

complete. 15" Sweep (450mm) ---- etc., complete with all lead

Supplying exhaust fan of 1440 RPM of 300mm (12") size

with bracket blades complete for light duty suitable to operate

on 230V 50Hz, AC Supply. ---- etc., complete with all lead

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double b...

Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wire...

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary len...

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling...

Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL stree...

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting

over existing pole / wall ceiling including clamps, bolts, nuts

and wiring using suitable capacity wires. ---- etc., complete with all l...

Supplying ......... amps rated 3phase with neutral bus bar

using required capacity electrolytic aluminium strips covered

with heat shrinkable coloured PVC sleeve, mounted on

phenolic/FRP/DMC insulator...

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying of multi function digital meter with three line back

light LCD type display for voltage, Current, frequency,

Power, power factor, KVA, KWH, KVAR suitable for 3

phase, 4 wire LT network with ...

Supplying and fixing of LED type panel board indicating

lamp with required colour suitable for 230/440v A.C. 50 Hz

12/24v D.C. ---- etc., complete with all lead

Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden

Current Transformer. Class 0.5 accuracy with Tape Wound. ---- etc., complete with all lead

Supply and Installation I Fixing I Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust pro...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. ---- etc., complete with all lead

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (Fire Fighting works)

Supply, erection, testing & commissioning of electrical motor driven end

suction back pull out centrifugal pump capable of delivering,adequate LPM

at required head. when running at 2900 rpm directly c...

Supply, installation, testing & commissioning of diesel engine driven pump,

horizontal mounted, Horizontal spiltcase centrifugal single stage pump,

capable of delivering required flow at required head...

Supply, Installation, testing and commisioning electrically driven jockey

pump of capacity 180.0 Lpm at required head end suction type bronze

impeller pump oupled to electrical driven motor with suita...

Supply, erection, testing and commissioning of Fire Fighting panel cubicle

type made out of 14/16 Swg MS CRCA sheet which is derusted, degreased,

phosphated and passivated with angle iron skeleton or ...

Supply, installation, testing and commissioning electrically driven Terrance

pump of capacity 900.0 Lpm at 35.0m Head bronze impeller pump coupled to

electrical driven motor with suitable HP with all ...

Supplying, installing , testing and commissioning of PN16 CI butterfly valves

of confirming to IS 13039 with necessary nuts & bolts etc., complete - etc.,

complete as per specificaiton with all lead a...

Supplying, installing , testing and commissioning of PN16 CI butterfly valves

of confirming to IS 13039 with necessary nuts & bolts etc., complete - etc.,

complete as per specificaiton with all lead a...

Supplying, installing , testing and commissioning of PN16 CI butterfly valves

of confirming to IS 13039 with necessary nuts & bolts etc., complete - etc.,

complete as per specificaiton with all lead a...

Supplying installing, testing and commissioning of PN16 CI "Non Return

Valve " confirming to IS 13039 with necessary bolts and nuts etc complete

includes cost of all materials labour charges with all ...

Supplying installing, testing and commissioning of PN16 CI "Non Return

Valve " confirming to IS 13039 with necessary bolts and nuts etc complete

includes cost of all materials labour charges with all ...

Supplying installing, testing and commissioning of PN16 CI "Non Return

Valve " confirming to IS 13039 with necessary bolts and nuts etc complete

includes cost of all materials labour charges with all ...

supply and installing testing and commissioning of CI " Y " stainer

confirming to IS standard with necessary bolts and nuts complete includes

cost of all materials labour charges with all lead lift lo...

supply and installing testing and commissioning of CI " Y " stainer

confirming to IS standard with necessary bolts and nuts complete includes

cost of all materials labour charges with all lead lift lo...

Supplying fixing and testing of Air cushions vessel. Fabricated out of 8mm

thik It is a 250 mm dia MS pipes (the ends should be dished) 1.2 M high

installed verically on suitable legs. Flange connecti...

Pressure guage of 150 mm dia including Isolation Valve and forged siphon

Tube including with all accssories as per IS:Spec. etc., complete as per

specificaiton with all lead and lift, loading unloadin...

Pressure Switch including Isolation Valve and forged siphon Tube including

with all accssories as per IS:Spec. - etc., complete as per specificaiton with

all lead and lift, loading unloading, labour, ...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

FIREFIGHTING ELECTRICAL 1.1 kV, XLPE or Heat resistant PVC

insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip

thickness and resistivity ...

FIREFIGHTING ELECTRICAL 1.1 kV, XLPE or Heat resistant PVC

insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip

thickness and resistivity ...

FIREFIGHTING ELECTRICALSupply of the Following XLPE armoured cable 1100 V Grade with ISI mark stranded / solid, aluminimum conductor complete with crimping type Lugs and Glands etc completed. 12 C...

Supply, intallation, testing and Commissioning 3 Core x 1.5 Sqmm for Pressure Switch ---- etc., complete with all lead

Supplying, installation, testing & commissioning of 12V ..AH

batteries in poly propylene container for D.G. sets. Low maintenance

batteries, plate type. (150 AH capacity) ---- etc., complete with all ...

Supplying and installing following size of perforated painted with powder cating m.s. cable trays with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from th...

GI/Copper strips for grounding connections, using necessary fixing

materials as required. (25 x 3 mm GI strip) ---- etc., complete with all lead

Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete...

SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges ne...

SITC of Gun metal BALL VALVE SIZE OF 19/20 mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charge...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...

Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete ...

Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete ...

Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specificaiton with all lea...

Providing & fixing Flow Switch in following sizes M.S. pipe including connnection etc as required.150mm dia ---- etc., complete with all lead

Supplying Installing, testing and commissioning of hydraulically operated sprinkler Gong Valve with water meter gong bell and trims as required, pressure gauges drain Valve, ball Valves check valve, s...

Supplying Installing, testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia. including cost of materials, labour, usage charges of machin...

Supplying Installing, testing and commissioning of 100mm dia 2 way Fire brigade inlet connection of 2 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per sp...

FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve,spindle and cast iron hand wheel. It has a female ...

Supplying Installing, testing and commissioning of63mm mm dia double headed Gun mental Hydrant Valve with flanged inlet 2Nos, stop valve, spindle and cast iron hand wheel. It has a 2 Nos female insta...

Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal cou...

Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour,usage charges of machinery complete as pe...

Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...

Supplying Installing, testing and commissioning of Hose reel cabin ---- etc., complete with all lead

Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or f...

Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete...

SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges ne...

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...

Supplying Installing, testing and commissioning of, pendent Type/Upright Type ,Standard Response Standard Coverage, Sprinkler, K5.6(80),1/2”NPT, 68 Degree C, Chrome finish, UL liste ---- etc., compl...

Providing,Installation,testing & commissioning of Water Curtain Nozzle, 15mm dia nickel chrome plate brass,BSPT, K- factor as per design consideration complete as required. ---- etc., complete with al...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Socke...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Socke...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Socke...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Socke...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Socke...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Socke...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Socke...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Socke...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work Forge...

CO2 2Kg Squeeze grip

Supply and installation of 2 Kg C02 Gas Type Fire Extinugisher Squeeze

grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg.

empty Weight 7.1 Kg. Can Height 595MM D...

Providing Aqueous Film-Forming Foam - 9 Ltr

Supply and installation of 9 Ltr Fire Extinugisher Aqueous FilmForming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight

15.1Okg. empty weight 6...

Providing ABC Powder based MAP 50, 6Kg Supply and installation in position, testing and commissioning 6kg Fir e

Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure

Type, Pressure Gauge, ...

C02 4.5Kg Squeeze grip Supply, installation in position, testing and commissioning of 4.5Kg C0

Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight

Management used Unused Mechanism, Squeeze Grip...

Supplying of two bucket stand alongwith buckets. complete ---- etc., complete with all lead

Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, ...

Providing and fixing in position the signages "FIRE ORDER" it should contain the following text on 3mm thick "Opaque" PVC foam board of computerized cut, PVC non-reflective self adhesive vinyl painted...

ACTION BY SECURITY/RECEPTION UPON RECEIPT OF INFORMATION THROUGH FIRE ALARM OR FIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM. A) ALERT THE OCCUPANTS BY USING PUBLIC ADDRESS SYSTEM. B) INFORM FIRE C...

Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, ...

Supply installation testing commissioning of P.A System Rack made out of 18 gauge M.S. Sheet with glass door with locking arrangement and powder coating grey paint two coats at inner and outer of box,...

Supplying Installing, testing and commissioning of P.A.System console panel with push button with speaker and indictoron Accomdated in M.S.Cabinet with painting -do- 40 Zone cansole. Complete ---- etc...

P.A.System amplifier 250W RMS out put with complete wiring and controls accessable form front ---- etc., complete with all lead

Supplying Installing, testing and commissioning of MIKE suitable to I.A.System. Complete ---- etc., complete with all lead

Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, t...

Supply & Laying of 2 X 1.5 Sqmm fire alarm armored cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. ---- etc....

Supply, install, test and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character /240X64 Pixel / 7inch Touchscreen graphic...

Supply, intallation, testing and Commissioning of Graphical software for entire fire alarm panels including detector configuration, commissioning etc ---- etc., complete with all lead

Supply, intallation, testing and Commissioning of Network card for fire alram panels integration ---- etc., complete with all lead

Supplying Installing, testing and commissioning of Response Indicator constists of twin LED wioth electronic circutarx work on 24 DC enclose in PVC retangular. complete including cost of materials, la...

Repeater Panel Supply, Installation , Testing & Commissioning  of Network Active Repeater Panel with 1500 Character / 240X64 Pixel / 7inch Touchscreen. The LCD shall Display all events / detectors, d...

Supply, intallation, testing and Commissioning of loop card ---- etc., complete with all lead& lift, as per specifications and as per directions of the Engineer in charge of the work. ---- etc., comp...

Supply Installation testing & Commissioning of conventional type photo/Heat

electric smoke sensor with flashing LED capable of woking at 9V to 33 V DC .The

Optical Smoke Detector is unaffected by wind...

SITC OF Fault isolation module:- Supply, Erection,Testing and Commissioning of UL-APPROVED Analog addressable fault isolator circuit modules of wall mounted type with mounting accessories. ---- etc., ...

Sounder cum Strobe

Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon  with inbuilt isolator and  having Min 15 distinct sound patterns/ multitone to...

Supply, install, test and commissioning of Analogue addressable Manual Call Point (Resettable Type) with inbuilt isolator and LED indicator, designed for IP44 requirements and approved to operate in m...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm. ---- etc., c...

Supply, install, test and commissioning of Analogue addressable Monitor Cum Control (Input/Output) module (1+1) with inbuilt relay and isolator with LED indicator, approved to operate in minus10degC t...

Supply, intallation, testing and Commissioning of 2C 1.5 sq mm armoured FRLS cables in celing with suitable clamps and screws (RED colour) ---- etc., complete with all lead

SISupply, intallation, testing and Commissioning TC of 7AM-12 V Battery for fire alarm system ---- etc., complete with all lead

Supply, intallation, testing and Commissioning of GRP Tank of 10000L capacity for Fire Fighting GRP Water Tank ; Material. GRP ; Capacity. 10000 L ;Shape:Rectangular with suitable size; Usage/Applicat...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar - etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work ---- etc.,...

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (MGPLS Works)

OXYGEN SUPPLY SYSTEM OXYGEN MAIN MANIFOLD SYSTEM : 40 cylinder

(20+20) Oxygen Manifold should

be suitable to withstand a pressure of 140 Kg/Cm2and above along with high pressure copper

annealed tail p...

Micro process based Automatic High flow Upto 2200 ltrs/min Oxygen Control

Panel. Fully automatic changeover panel

3 SOURCE FULLY AUTOMATIC OXYGEN CONTROL PANEL

Working Pressure from the oxygen concent...

Oxygen Manifold System : Emergency The Control pannel shall be of fully integrated type with all saftety futures inbuilt for high

pressure and high flow upto 2200 ltrs / min Oxygen system. 4+4 Cylinde...

NITROUS OXIDE MAIN MANIFOLD SYSTEM

Supply, Installation, Testing and commissioning of 2 cylinder (1 + 1) Nitrous Oxide manifold

supply with all necessary controls and safety fittings. Make of AKTIV or...

Nitrous Oxide EMERGENCY MANIFOLD SYSTEM

Supply, Installation, Testing and commissioning of 1 cylinders Nitrous Oxide manifold supply

with all necessary controls and safety fittings and 0 To 10 Kg/cm2 ...

VACCUM SUPPLY SYSTEM The pump installation shall be Duplex system consisting of 2 Nos (1W+1S BY) identical Rotary

Vane Type Pumps each of which shall be capable of independently producing designed sys...

VACUUM BACTERIAL FILTERATION,

Suitable Medical Vacuum filters are used for removal of bacteria & other contamination from the

suction side of vacuum pumps, preventing infection of pump and the atmosph...

MEDICAL AND SURGICAL AIR SYSTEM Compressed Air System: System For

Medical use. Type : Reciprocating, Air cooled, Oil/ Grease free Capacity of Piston Displacement :

52.7 cfm 1620 Lpm Drive : Belt drive...

Duplex Medical Air Dryer System ( Breathing Air System) (2 Nos of 1 set) 100

CFM Air Dryer Min Working Pressure should be 4 bar, Rated Inlet Pressure should be 7 bar Max

Working Pressure should be 16 ...

DUPLEX COMPRESSED AIR BREATHING FILTERATION SYSTEM-3 STAGE The

filters Shouldhave maximum contaminant removal efficiency with minimum pressure drop. The

filtration system should conform to breathing a...

Supply, Installation, Testing and Commissioning of 80 CFM Air

cooler system, with 3 phase fan (High RPM Fan) suitable for 415 V, 3Phs 50 Hz ---- etc., complete with all lead

Supplying & fixing of Janatic Air Pressure Regulation ---- etc., complete with all lead

Supplying & fixing of Auto Drain Valve for Air Reciver Tank ---- etc., complete with all lead

Automatic change over Electrical panel for air Compressor system Auto change over every six hours change cycle, booster, hour meter, volt meter, RYB indicator, MCB, starter, MS powder coated etc. ----...

Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming t...

Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming t...

Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming t...

ACCESSORIES ALONG WITH CALIBRATION CERTIFICATES. ISOLATION VALVES: Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, co...

ACCESSORIES ALONG WITH CALIBRATION CERTIFICATES. ISOLATION VALVES: Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, co...

ACCESSORIES ALONG WITH CALIBRATION CERTIFICATES. ISOLATION VALVES: Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, co...

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (CCTV system and Networking system)

IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080( 2MP),2.7mm about 13.5mm,F1.4, Motorized, with a min illumination of 0.05lux ...

IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm about 13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/...

Supplying, installation, testing and commissioning of SITC of complete 32 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up ...

Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete with all lead

Supply and Installation of 16 Port L2 Managed Poe Switch The rate shall include all mounting accessories complete as required ---- etc., complete with all lead

Supply and Installation of I/Os ---- etc., complete with all lead

Supply and Installation of 2 Mtrs Patch Chord The rate shall include all mounting accessories complete as required ---- etc., complete with all lead

Supply and Installation of Quad Face Plate Camera Side With IOS The rate shall include all mounting accessories complete as required ---- etc., complete with all lead

Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete with all lead

Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete with all lead

Supply, Installation, Testing and Commissioning of 6-core OFC - Armoured outdoor cable (SM) ---- etc., complete with all lead

Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting...

Supplying & Fixing of Patch panel for LAN cabling .16 Port 10/100 patch panel ---- etc., complete with all lead

Supplying & Fixing of switch mounting rack with power manager & Cable manager 12U with 450mm depth ---- etc., complete with all lead

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 ---- etc., complete with all lead

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead

Supplying & Fixing of I/O Socket with back box Single I/O ---- etc., complete with all lead

Supplying & Fixing of switch mounting rack with power manager & Cable manager as per standard specification. 9U with 450mm depth ---- etc., complete with all lead

Supplying & Fixing of switch mounting rack with power manager & Cable manager as per standard specification. 18U with 650mm depth ---- etc., complete with all lead

Supplying fixing of Network Switches 24 Port 10/100 Switch ---- etc., complete with all lead

Supplying fixing of Network Switches 16 Port 10/100 Switch ---- etc., complete with all lead

Supplying fixing of Network Switches 8 Port 10/100 Switch ---- etc., complete with all lead

Supplying & fixing of ..mtrs. Cat 6Patch Cable. 1Mtr ---- etc., complete with all lead

Supplying & Fixing of Patch panel for Lan Cabling. 24 Port 10/100 /1000 Patch Panel ---- etc., complete with all lead

Supplying & Fixing of Patch panel for Lan Cabling. 16 Port 10/100/1000 Patch Panel ---- etc., complete with all lead

Supplying and drawing PVC flexible one pair telepone unarmoured tinned copper cable. 2 Pair ---- etc., complete with all lead

Supplying and drawing PVC flexible one pair telepone unarmoured tinned copper cable. 4 Pair ---- etc., complete with all lead

Supplying and fixing of MDF krone junction box with KRONE

Module / Telephone cable termination. 20 pair MDF ---- etc., complete with all lead

Supplying and fixing of MDF krone junction box with KRONE

Module / Telephone cable termination. 30 pair MDF ---- etc., complete with all lead

Supplying and fixing of MDF krone junction box with KRONE

Module / Telephone cable termination. 50 pair MDF ---- etc., complete with all lead

Supplying and fixing of MDF krone junction box with KRONE

Module / Telephone cable termination. 100 pair MDF ---- etc., complete with all lead

Supplying and drawing PVC insulated gas injected physical foam jelly floodede co-axial TV cable. RG-6 ---- etc., complete with all lead

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (Lift System and Consultancy Charges)

Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable

voltage variable frequency drive, with or without machine ...

Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable

voltage variable frequency drive, with or without machine ...

Preparation of detailed Architectural drawings,Structural design and drawings including Soil exploration as per I.S Codes and proof checking by IISC/NIT/IIT only as decided by the Department and the s...

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (STP & ETP Works)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners where...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete with all lead

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing Brick work with common burnt clay machine moulded perforated bricks of clasS designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cem...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

KSRB 4-4.1 Extra for use of water proofing compound in Cement concrete of mix 1:1:2,at one kg of compound per bag of cement.Specification No. KBS ---- etc., complete with all lead

Providing & fixing 1 HP Mono block pump of approved make with all accessories etc., complete including cost of materials, labour as per specifications.& as per the direction of the Engineer - in - cha...

Design, Supply, Unloading, Shifting, Installation, Testing and Commissioning of 45KLD Hybrid DEWATTS technology Sewage Treatment Plant (STP) consisting of Raw Sewage Lifting Pumps, Filter Feed Pumps, ...

Raw Sewage Lifting Pumps : Supply, Installation, Testing and Commissioning of compact monoblock dry motor submersible non-cutter pumps of suitable rating, with non-clog free flow open CI impeller, CI ...

FILTER FEED PUMPS : Supply, Installation, Testing and Commissioning of Horizontal Centrifugal Pump as per IS 6595 (Part 2), CI body and CI impeller, shaft of CI with mechanical seal, connected to a TE...

Ozone Disinfection System :

Providing and fixing in position completely automatic ozone generator from atmospheric air for treated disinfection along with Ozone Concentrator with all necesary accessor...

Dual Media Filter :

Supply, Installation, Testing and Commissioning of MS fabricated Epoxy Painted vertical filter with adequate dirt holding capacity. Fabricated from MS sheet as per following specif...

Electrical works including main electrical panel- self standing floor mounted, Non Compartmantalized panel, along with copper flat / round armounted cabling from panel to all equipments inside the STP...

PLANT ELECTRICAL CABLING WORK

Supply, installation testing and commissioning of Inter unit Plant Electrical with cabling of 4 core copper armoured cables run in G.I perforated cable tray and fittings ...

INTER UNIT PIPING WORKS

Supply, Installation, Testing and Commissioning all piping (as described below) and isolation control valves for making the system, all complete as required in all respects. co...

INTER UNIT PIPING WORKS

Supply, Installation, Testing and Commissioning all piping (as described below) and isolation control valves for making the system, all complete as required in all respects. co...

INTER UNIT PIPING WORKS

Supply, Installation, Testing and Commissioning all piping (as described below) and isolation control valves for making the system, all complete as required in all respects. co...

Instrumentation works

Supplying Instalaltion and Testing Commissioning of Dia 40 mm Electro-Magnetic Flowmter ( For Sewage Application ) ---- etc., complete with all lead

Supplying and Instalaltion of Level Sensors including wiring and installation

---- etc., complete with all lead

Supply and adding require Cowdung and anaerbic bacteria culture for charging the Anaerobic Reactors and compelte commissioning.

---- etc., complete with all lead

ETP - Effluent Pumps of size 1 HP, 3 Phase, to lift particle size of 25mm. Effluent transfer pumps one working & one standby for ETP ---- etc., complete with all lead

Agitator - Slow speed agitator/ Submerged Aerator for mixing ETP effluent ---- etc., complete with all lead

Flocculator - Flocculator for mixing coagulants ---- etc., complete with all lead

Chemical Dosing system - Dosing pumps, tank, strieres for mixing chemicals ---- etc., complete with all lead

ETP modular plant - MS Epoxy coated pre fabricated ETP plant ---- etc., complete with all lead

Electrical Panel - Non compartmentalised MCC panel with all control ---- etc., complete with all lead

Piping Plant Piping, valves NRV complete ---- etc., complete with all lead

SS Bar screen - SS bar sreen to fitt in to Screening Chamber ---- etc., complete with all lead

Providing Infrastructure facilities to Hunsuru Taluk Level Hospital in Mysuru District. (Water Treatment Plant)

FILTER FEED WATER PUMPS Supplying, installing, testing and commissioning of 2 Nos. of Submersible type raw water pumps (one working + one stand by) for pumping the water from raw water U.G. sump throu...

MS SAND PRESSURE FILTER Supply, installation testing and commissioning of sand pressure filter (SPF) for filtration of raw water. The filter shall be suitable for 7.50 cu.m / hr flow rate and designed...

MS - ACTIVATED CARBON FILTER (ACF): Supply, installation, testing and commissioning of activated carbon filter for filtration and removal of colour in bore well water. The filter shall be suitable for...

MS - WATER SOFTENER - DOMESTIC USE : Supply,installation testing and commissioning of softener for softeninig of raw bore well water for domestic use. The softener shall comprise of the following: a) ...

CHLORINE DOSER: Supply, installation, testing and commissioning of on line automatic electronic sodium hypo dosing unit with automatically operated dosing pump etc., The unit shall comprise of the fol...

ALUM DOSER: Supply, installation, testing and commissioning of electronic alum dosing unit with automatically operated dosing pump etc. The unit shall comprise of the following: a) Single moulded FRP ...