Electrical Installation work

Supplying and fixing 2 + 16 way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Incl. Supplying and fixing 240 V MCB Isolator/MCB on din rail of it and necessary connection as required. Incoming - 40 A DP MCB Isolator --1 no's outgoing--6-16A SP MCB of Breaking capacity 10kA & C characteristics--16 no's Make-Legrand/ABB/LK

Supplying and fixing 2 + 8 way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Incl. Supplying and fixing 240 V MCB Isolator/MCB on din rail of it and necessary connection as required. Incoming - 40 A DP MCB Isolator --1 no's outgoing--6-16A SP MCB of Breaking capacity 10kA & C characteristics--16 no's Make-Legrand/ABB/LK

Supplying and fixing 2 Way MCB SS enclosure with IP-20/30protection, powder coated provision for two pole MCB, on wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment incl S&F of 40A DP MCB (C Characteristics) Make -Legrand/ABB/LK

Supplying and fixing 4 Way MCB SS enclosure with IP-20/30 protection, powder coated provision for two pole MCB, on wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment incl S&F of 63A FP MCB (C Characteristics) Make -Legrand/ABB/LK

Supply & fixing 240 V 25ATimer controller for AC machine in SS double door (2+10) way DB enclosure with IP-43 ( Make-L&T ) or equivalent with S&F following electrical accessories & front door key locking arrangement with all connection by finishing the ends of 2 x 4 & 1 x 2.5 copper wire dowels solder less socket by crimping method as to GS earthing attachment on wall with suitable size flat iron frame Inc. Necessary connections as per direction of EIC:- i) 10kA C-curve,240V 25A DP MCB (LK/Schindler/ABB)---1 no. ii) 24 Hr programmable digital time switch(LK/Schindler/ABB)---1 no. iii) 2 pole power contractor (LK make cat no MNX22/230) ----1 set iv) LED indicator( Red/Green) ---- 1 Set v) 2 Module plate with cover-----1 no. vi) Auto-off-bypass SPDT toggle switch(Approved make/reputed make)-----1 no. vii) 10 A Modular type switch-----1 no. viii) Outgoing connection make ELMAX(Approved make)-----1 no

Supply of 4 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] 4 core 25 sqmm.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, levelling up and restoring surface duly rammed

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & FMS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :4 Core 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :4 Core 25 sqmm

Relaying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles as required, making holes etc. as necy. mending good damages and painting

Supplying and Drawing 1.1 KV single core stranded 'FRLSH' PVC insulated & unsheathed single core stranded copper wire (Gloster/Havells/Polycab/KEI) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

3 x 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Distribution wiring in 1.1 KV single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Gloster/Havells/Polycab/KEI) in 20/25/40 mm size PVC rigid conduit 'FR' (Precision/Polycab make, HMS/MMS type) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets (Dowels Make) and insulated tapes etc., including supplying sockets, tapes.

3 x 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Havells/Gloster/Polycab/KEI) partly in 20mm size PVC rigid conduit 'FR' (Precision/Polycab Make, HMS/MMS type) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board (Anchor) on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed]

Average run 8 mtr

On Board

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Havells/Gloster/Polycab/KEI) in 20mm size PVC rigid conduit 'FR' (Precision/Polycab Make, HMS/MMS type), with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board (Anchor) cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching colour) top cover 3 mm thick and incl. 175mm x 100mm x 62.5mm inspection box making earthing attachment, painting the MS box and mending good the damages to original finish Average run 10 mtr

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)

19 mm dia 3 mm thick polythene pipe

25 mm dia 3 mm thick polythene pipe

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works

Channel Size : 40 mm x 40 mm 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Channel Size : 43 mm x 43 mm 25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, (Make:Anchor) (Black or white as directed by EIC)on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and Bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting Bakelite/Perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Make:Anchor)(Black or white as directed by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/Perspex cover and making necessary connections as required

Supply & Fixing Socket type fan regulator (Step type) (Make:Anchor) on existing sheet metal switch board with bakelite/Perspex top cover by screw after making housing for regulator knob by cutting bakelite/Perspex top cover incl. making necy. connections etc.

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

Supply & Fixing bakelite / Perspex top cover on existing Inspection board by Brass screws

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

Supply and Delivery of 4 feet Industrial box type single LED tube fitting incl. Supply & Delivery of 1 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Fixing only single/twin LED light fitting complete with all accessories directly on wall/ceiling with MS "Z" Clamps and suitable size MS fastener, etc. as required

Supply & Delivery of 240V LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] 9W LED Bulb B22 Base

Fixing only lamp

Supply & Delivery of 240V, LED street lights with optic lens and polycarbonate diffuser having following wattage, in white powder coated pressure die cast aluminium housing with IP 66 protection & incl. 10 kV SPD, with glare free uniform illumination with CCT (5700K-6500K) having minimum luminous efficiency of 110 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Wipro/Lighting Technology/ manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supply & Delivery of 230V, 1-Ph, AC ceiling fan of following size incl. all accessories. (Make- Crompton / Usha / Orient) [BEE star rated] Sweep Size- 1200 mm (48"), Wattage ≤ 55 Watt, R.PM ≤ 380, Air Delivery ≥ 210 C.M.M

Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. (Make- EPC/ USHA/Orient CROMTON) [ISI mark, IP55 rated] 225 mm (9"), 4 Blade, RPM ≤ 1400 , Wattage ≤ 45 Watt, Sound level ≤ 49 dB, Air Displacement (In CMH) ≥ 440

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F safety wire , connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm Exhaust fan (9")

Supply & Fixing Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 23 cm Exhaust fan (9")

Supplying & fixing medium gauge of the following dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing materials as required

Supplying & Fixing GI waterproof type looping cable box (Sintex) size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketed GI top cover with brass machine screws etc., earthing terminal with lug, on wall with bolts, nuts etc. including painting with anticorrosive paint

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991 having the following spec.- 4 Bar 415V,63A Dimension of Al. bars-4 x 20x5mm Dimension of Sheet Metal Box-500x150mm

Cost of Dismantling of all the electrical equipment's like fans, tube lights, power sockets ,distribution boards ,panels etc with one's own tools' and tackle and shifting them properly from site to designated store as per direction of EIC incl mending good damages to original finish in each qtr and staircase portion

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Excavation of soil for installation of Earth Electrode and filling & ramming (For Soft soil)

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 6 SWG

Defect Liability Period - 1 One) year after completion of work

Make & model of each and every material to be approved by EIC

Please Enable Macros to View BoQ information