Construction of the Annexe-II Building with Extended Floors and Including Interior and Furnishing Works at Dispur, Guwahati-06. (Additional Estimate for Providing Furniture and Work Stations)

Amount

Minister Chamber , Commisioner Office, Chief Engineer Chamber Model: Senate HT-501 A The overall size of table shall 2200L x 800D x 780H with Side Unit Extention 1010L x 500D x 650H. The table top shall be made of 25mm thick with Pre laminate Partical board with all side 2mm pvc edge band finish. The working table top shall have size of 1800L x 800D. The table top visible side shall be 50mm thick. The edge of table top shall be cover with L-shaped alumimum extrusion with size of 10mm x 15mm.This aluminium extrusion shall increase the overall look of the table top.The main table top shall be supported on one side top supported pedestal and other side of side unit. 3 equal drawer unit shall be provided with size of 495 W x 800D x 650H. The drawer unit shall be made of 18mm thick pre laminate partical board with 2mm pvc edge band finish.The front modesty shall be made of 18mm thick pre laminate Partical board with 450mm height. Modesty shall be fitted on gable end with helps of mini fix. Wire Management: 1 No. Aluminium Flip Up and provision to mount swicthes and sockets on metal cable Dump and vertebra considered for wire uptake from floor to cable dump. Side return unit shall have overall size of 1010L x 500D x 650H.The body of side unit shall be made of 18mm thick pre laminte Partical board with 2mm PVC edge band finish.The side table design should be such that it has flexibility to be fixed either in right hand side or left hand side of the user during the time of assembly. The side unit shall have one openeble shutter with 2 equal compartment to keep the documents and rest area shall have open compartment. The overall size of Back unit shall be 1800L x 400D x 2000H. The back unit top shall be made of 25mm thick pre laminate partical board with 2mm pvc edge band on all the side. The side pannel shall have made of 18mm thick pre laminate partical board with 2mm pvc edge band finish all the visible side. The storage consist of 2 openeble door with size of 450W x 1940H and 2 openable shutter with height of 780mm at the floor level. In middle of the storage shall have openable compartment and the shelf of openable compartment shall be made of 25mm thick pre laminate partical board with 2mm pvc edge band in the viasible side of shelf. The door shall be operated by leatherette strip handle.Make: Featherlite Make: Featherlite

Special Secretary, Secretary, Add Chief Secretary, Principal Secretary, Add Chief Main Table MODEL : FST 21075 Specifications: MAIN TABLE: 2100W X 750D X 750HT SIDE COMPOSITE STORAGE: 1050 X 450 X 750 HT BACK STORAGE: 1800 X 450 X 750 Ht (900 x 2 nos) Main Table of size 2100 x 750 x750 (WDH) with side unit size of 1050 x 450 x 750mm(LDH).The worktop shall be made up of 25mm thick PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be made of 18mm thick pre laminated partical boards with E1 norms and all visible side 2mm pvc edge bending. Modesty shall be connected with 3 nos L-shape pressure aluminium die casted connector. MOdesty height shall be 450mm .The understructure shall be made of 18mm thick prelam partical board with 2mm pvc edge band all the visible side.Wire Management: 300 mm Anodised flip up Made of Aluminum in anodised finish, that shall have soft closure and three way wire acess & PVC cable tray. For entry of cables from the floor into the cable tray, Wire Entry. Side storage of size 1050 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer & filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided. Back storage of size 1800 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms having shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided. CPU tray and keyborad tray shall be provided. Make: Featherlite

CABIN TABLE Specifications: The worktop shall be made up of 25mm thick PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be made of 18mm thick pre laminated partical boards with E1 norms and all visible side 2mm pvc edge bending. Modesty shall be connected with 3 nos L-shape pressure aluminium die casted connector. MOdesty height shall be 450mm .The understructure shall be made of 18mm thick prelam partical board with 2mm pvc edge band all the visible side.Wire Management: 65 mm gromet shall be provided above the table top. Side storage of size 900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer & filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided. Make: Featherlite MAIN TABLE: 2100W X 750D X 750HT SIDE COMPOSITE STORAGE: 900 X 450 X 750 HT

MAIN TABLE: 2100W X 750D X 750HT MAIN TABLE: 1950W X 750D X 750HT SIDE COMPOSITE STORAGE: 900 X 450 X 750 HT

MAIN TABLE: 1800W X 750D X 750HT SIDE COMPOSITE STORAGE: 900 X 450 X 750 HT

MAIN TABLE: 1650W X 750D X 750HT SIDE COMPOSITE STORAGE: 1050 X 450 X 750 HT

MAIN TABLE: 1500W X 600D X 750HT SIDE COMPOSITE STORAGE: 900 X 450 X 750 HT

LINEAR WORKSTATION Specifications: The worktop shall be made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the side of worktop. Understructure shall be supported on CRCA MS powder coated angular legs of cross section 40 x 40 x 1.6mm thick and horizontal beam made up of 40 x 20 x 1.2 mm thick. Vertical Legs shall be connected with horizontal beam through aluminium die cast connectors having opening of 40 x 40 on the vertical side & 40 x 20 on the horizontal side to accomodate connection of Leg & horizontal frame. Connector shall be L shaped having angle of 10 degree. Cross beam of section 40 x 20 shall be fixed below the table table ont he horizontal frame using aluminium die cast connector for better strength. Understructure shall powder coated upto 40 to 60microns. The Raceways shall provided below the work surface for carrying wires from one end to other end of the cluster, Size offered shall 250mm Ht, Thickness 70mm. Provided with separator for data and power cables. Designed to accommodate 50-60 CAT-6 cables.The “Hook on” raceway covers shall provided with opening from either side. The cover shall made of MS Powder coated metal/prelam particle board. The switch/sockets shall mounted on the Raceway covers as per the client requirement Switches. For entry of cables from the floor into the cable tray, Wire Entry covers shall provided between the intermediate legs with separator for entry of power and data. The front fabric magnetic screen shall be provided with 300 mm ht. made up of 18 mm thick prelam particle board of grade E1 upholstered by fabric, having aluminum extrusion at all three sides having cross section size of 12mm x 5mm & joined at all 4 corners with Zinc mazak5 die cast connector of size 15 L x 15 H x 12mm W. Side storage of size 900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer & filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided. The keyboard tray and CPU trolly shall be provided. Make: Featherlite MAIN TOP: 1500W X 600D X 750HT TABLE TOP Side COMPOSITE STORAGE: 900 x 450 x 750 Ht WITHOUT MAIN SCREENS.

MAIN TOP: 1800W X 600D X 750HT TABLE TOP Side COMPOSITE STORAGE: 750 x 450 x 750 Ht WITHOUT MAIN SCREENS.

WORKSTATION MAIN TOP: 1800W X 600D X 750HT TABLE TOP Side COMPOSITE STORAGE: 900 x 450 x 750 Ht

LINEAR WORKSTATION MAIN TOP: 1200 x 600 x 750 Ht TABLE TOP WITH MAIN SCREEN OF 18 MM THICK FABRIC MAGNETIC SCREENS.

LINEAR WORKSTATION MAIN TOP: 1200 x 600 x 750 Ht TABLE TOP WITHOUT MAIN SCREENS.

Library Table Model: Multipurpose table 1200L x 600D x 750 HT The overall size of table shall be 1200L x 600D x 750H.Table top: Made of 25mm thick prelaminated particle board of approved shade . All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. The understructure will feature vertical legs made of 50 mm x 50 mm x 1.6 mm steel tubing, while the horizontal frame will be constructed from 50 mm x 25 mm x 1.6 mm steel. A cross beam, sized 40 mm x 20 mm x 1.6 mm across the length of the table, will be installed beneath the tabletop to provide additional support. This cross beam shall be connected on both sides with pressure die cast connectors of 50 mm height, 70 mm width & 35 mm depth designed in a shape acting as spacer between horizontal frame & worksurface. Wire Management: NILL Make: Featherlite

Library Rack Model : FR-60 600L X 300D X 1500 HT Specification : Compact Portable No tools required Make : Make: Featherlite Or Equivalent

BOARD ROOM TABLE Specifications: Table top: Made of 25mm thick prelaminated particle board of approved shade. All the edges of board room table surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: 25mm thick PLT gable end. Modesty Panel: 18mm thick 450mm ht plt modesty panel is considered.Wich is machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Wire Management: 300mm Anodised flip up Made of Aluminum in anodised finish, which has soft closure and three way wire acess & PVC cable tray.For entry of cables from the floor into the cable tray, Wire Entry covers are provided for entry of power and data. Make: Featherlite Main Table: 1800 x 600 x 750 (2nos) Side Table: 1800 x 600 x 750 (2 nos) Side Table: 1350 x 600 x 750 (10 nos)

Main Table: 2400 x 600 x 750 (1 no) Side Table: 1500 x 600 x 750 (8 nos)

Main Table: 2400 x 600 x 750 (1 no) Side Table: 1500 x 600 x 750 (6 nos)

Main Tacle: 2400 x 600 x 750 (1 no) Side Tacle: 1350 x 600 x 750 (8 nos)

Main Tacle: 2100 x 600 x 750 (1 no) Side Tacle: 1650 x 600 x 750 (4 nos)

PLB OPEBANLE SHUTTERS STOARGE Specification: Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity should be provided for safe storage of documents. Make: Featherlite 600 x 450 x 1050 HT

Center Table Model : FOS Center table The overall size of the Centre table shall be 1050 mm Length x 550 mm depth, 450 mm height. the table top shall be made up of 18mm thick prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom side. Supported on: Metal Swag leg Make: Featherlite

Corner Table Model : FOS CORNER TABLE Size 600 x 600 x 450 HT The overall size of the Centre table shall be 600 mm Length x 600 mm depth, 450 mm height. the table top shall be made up of 18mm thick prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom side. Make: Featherlite

Minister Chamber , Commisioner Office, Chief Engineer Chamber Main Chair Model: Senator HB Leatherette Leather chair High Back Chair : The overall size of Chair shall be Total height 1150 to 1250 +/-5 mm, over all width should be 520 +/-5mm and Overall depth should be 470 +/-5mm. Back Width 360 mm at Top and 500mm at bottom, Seat Width 520 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 455mm to 555 mm +/-5mm. Seat & back PU cushion shall be uplhostered with pure leather on user touch points.The Chair should be provided with Synchro tilt Mechanism with Multi lock features. The mechanism shall allow 360 degree revolving feature along with height adjustablility.The chair shall have fixed armrest with Single die casted right trapezium shaped arm rest overall size of 250 L x 190 H & having top upholstered leather on top. The width of the armrest shall be 60mm and overall length on top surface shall be 260mm. The chair back shall have S-curved. Multi lock nob shall be provided on the left side below the seat. Tension adjustment knob shall be provided under seat. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Chair shall be provided with aluminium die cast pedetstal having twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Make: Featherlite

Minister Chamber , Commisioner Office, Chief Engineer Chamber Visitor's Chair Model: Bravo VA Bravo Low Back Visitor The overall size of chair shall be : Total height 940mm, Total width 630mm, Total Depth 580mm. The chair seat size shall be 520mm width and 460 seat depth.The chair seating height shall be 450mm. The chair shall have seat to back height 510mm. The chair shall have back width at lumber 490mm and 440mm at the top. Seat and back shall be upholtered with leatherette 75% PVC & 25% polyster - 640 GSM, Abrasion - 100000 cycles. The chair shall have Fixed arms connected to seat and back. Frame shall be made out of ERW tubes with 25 mm diameter with 2.1 mm thickness pipe conforming to IS – 4923.Frame shall offered with powder coat finish to provide an attractive finish. It shall be in black colour. The powder coating pre-treatment shall carried out with three in one chemical. After pre-treatment process, the components shall powder coated for better adhesion of paint. The frames shall powder coated with epoxy polyester powder to the thickness of 40-60 microns as per IS 101 and oven baked at 180°.Leg Bush shall be provided Molded with PPCP.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Make: Featherlite

Special Secretary, Secretary, Add Chief Secretary, Principal Secretary, Add Chief Main Chair Model: Amaze HB High Mesh Back Chair The overall size of Chair shall be : width 600 +/-5mm, depth 640 +/-5mm. Total height 1170 to 1270 +/-5 mm, Back Width 425 mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20%. PU Adjustable Lumbar Support full length of size 365 mm, 110 mm height and 25mm thickness. The Chair should be provided with Self Calibrating Multilock Mechanism that should adjust the tension of the back sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon base shall be provided.Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Make: Featherlite

Special Secretary, Secretary, Add Chief Secretary, Principal Secretary, Add Chief Main Chair Model: Smart VA The overall height of the chair shall be 885mm, Back height- 450 mm. Seat width: 480 mm, Seat depth: 455 mm, Seat height: 485 mm, Back width at lumber shall be 450mm, at top 490mm , at bottom - 400mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. Arms: Fixed Arms Injection molded fixed arms- PP . The chair shall be supplied with Mesh at the back rest. The back frame shall be made up of injection molded PPGF.The Frame shall be made out of 22mm round tube with 1.6 mm thickness pipe conforming to IS – 4923. Frame is welded by Co2 welding process for uniform finish conforming to IS 816.Frame shall be powder coated to provide an attractive finish. It shall be in black colour.Leg Bushes : Bushes moulded with PP. Make: Featherlite

Cabin Table's Main Chairs Model: Astro HB Astro high back chair high back chair, back width : 380mm , Total height : 1050 – 1250 mm, Back height- 520 mm.Seat width : 485 mm, Seat depth : 455 mm, Seat height : 435 – 535 mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The Chair should be provided with Synchro tilt Mechanism. The mechanism shall allow 360 degree revolving feature along with height adjustablility.The mechanism shall offered with center tilt mechanism with single lever with one position lock with seat to back tilt ratio of 2:5. Seat tilt tension adjustment shall be operated in seating position.One way height adjustable arms moulded with Nylon GF 30%.The height adjustment button with Delrin P 500.The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Make: Featherlite

Cabin Table's Visitor's Chairs Model: Magna VA with arms Cushioned Seat The overall height of chair shall be 820mm, overall width 430mm and overall depth 430mm. The chair shall have seat size be 430mm x 430mm. The chair back height from seat shall be 410mm. The chair back width shall be 450mm. The seating height shall be 440mm from ground floor. Frame : The Frame shall be made out of ERW tubes with 22 mm diameter and 1.6 mm thickness pipe conforming to IS – 4923. Frame shall be welded by Co2 welding process for uniform finish conforming to IS 816.Frame is offered with powder coat finish to provide an attractive finish. It will be in grey colour. Seat: Seat shall be upholstered with micro fabric. No flaming or progressive smouldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021(match), IS 15061-2002 is optional. Fabric : 100% polyester - 185 GSM. Abrasion - > 50000 cycles. Foam : Cushion with U foam of density 25 kg /m3. Plywood : 12 mm thickness with 9 ply. It is hot pressed ply conforming to I S 303. The plywood is fitted with metal “T” nut to have metal to metal contact for the hardware used for fixing the seat. Back : Back is made of PP 10% TF, moulded with 550 tonnage press.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Make: Featherlite

Workstation , Counter Chair Model: Commet MB Medium mesh back chair Cushioned seat Overall size : Width 560 +/-5mm and Depth 670 +/-5mm. Total height 990 to 1090 +/-5 mm, Back Width 415 mm at Top and 450mm at bottom, Seat Width 480 +/-5 mm, Seat Depth 460+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The Chair should be provided with Synchro tilt Mechanism. The mechanism shall allow 360 degree revolving feature along with height adjustablility. The mechansim shall possess seat to back recline ratio of 1:1. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. One Way Adjustable Arms (Height) to be provied with height adjustment button made of Delrin P 500. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength. Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Make: Featherlite

Conference Main Chair Model: Amaze HB High mesh back chair The overall size of Chair shall be : width 600 +/-5mm, depth 640 +/-5mm. Total height 1170 to 1270 +/-5 mm, Back Width 425 mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20%. PU Adjustable Lumbar Support full length of size 365 mm, 110 mm height and 25mm thickness. The Chair should be provided with Self Calibrating Multilock Mechanism that should adjust the tension of the back sensing weight of the user. The mechanism shall allow 360 degree revolving feature along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon base shall be provided.Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Make: Featherlite

Conference Side Chair Model: Commet MB Overall size : Width 560 +/-5mm and Depth 670 +/-5mm. Total height 990 to 1090 +/-5 mm, Back Width 415 mm at Top and 450mm at bottom, Seat Width 480 +/-5 mm, Seat Depth 460+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied with Mesh Back rest. The Chair should be provided with Synchro tilt Mechanism. The mechanism shall allow 360 degree revolving feature along with height adjustablility. The mechansim shall possess seat to back recline ratio of 1:1. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. One Way Adjustable Arms (Height) to be provied with height adjustment button made of Delrin P 500. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress and strength. Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes. Make: Featherlite

Conference Back Side Chair With Writing Desk Model: Genius WD Genius Stackable Chair Powdercoated Legs The overall size of chair shall be, total height 840mm, total width 525mm and total depth 440mm. The chair seat size shall be 445mm width and 430mm depth. The chair back height from the seat shall be 425mm.The chair seating height shall be 440mm from floor level. The seat and backrest shall be made from a two piece of injection-molded PPGF 20% material. The sheel thickness shall be 4mm. The writing pad shall be provided on right side of usser. The understructure will consist of loop legs made from 12 mm thick mild steel (MS) rods, conforming to IS 7887 standards. The loop legs shall be interconnected by an MS bar plate (25 mm x 5 mm), located beneath the chair shell. Each bar plate will be equipped with holes for securely attaching the chair shell to the understructure. Injection-molded polycarbonate leg shoes will be fitted to the understructure to provide additional stability and protect the floor surface. The seat assembly will feature silicone bushings to ensure smooth, scratch-free stacking. The entire understructure will be powder-coated, with a finish thickness of 40 to 60 microns, ensuring long-lasting durability and a high-quality appearance. Make: Featherlite

Minister chamber & special secretary (HT) SOFA Model : MIST Or Equivalent Specification : Metal legs Upholstery : Soft Fabric Fabric : Grey Make: Fetherlite Or Equivalent Three Seater

Two Seater

Common SOFA Model : KNIGHT Or Equivalent Metal legs Upholstery : Soft leatherette Fabric : Black Make: Fetherlite Or Equivalent Three Seater

Two Seater

One Seater

Tandem Specification : MS Tandem Fixed Arms Make: Fetherlite Or Equivalent Four Seater

Three Seater

Two Seater

Momentum Techsys Provate Limited (BID ID -278807)