Special repair works to be carried out for the existing 1 No. of INS and 18 Nos. of PC/HC quarters at ANNAVASAL in Pudukkottai District

Amount

24) Manufacturing & supply of steel windows (weight basis)

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

37.1) White washing 3 coats (slaked)

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia

b. 25 mm dia

Annexure 8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture c. In Second Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture c. In Second Floor

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

38.4.1) Two coat of Oil Bound Distemper over the primer coat of white cement

38.4.3) Painting the old wall with two coats of Oil Bound Distemper over the Existing wall surfaces including thorough scrapping

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

40.1) Two coats of painting over the old wood work including Removing paint from doors, windows & wood works by manual labour

41.1) Two coats of painting over the old iron work including Removing old paint from iron surface with sand paper

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

52.4) Supplying laying fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI/GM specials c. 20mm dia

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 b) 160mm dia UPVC Non Pressure pipe

100) Supplying and fixing of 9 watts LED Bulb

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb

796) Two coat of Exterior emulsion paint including special primer for outer wall surfaces

796.1) Painting the old outer walls with two coats of Exterior emulsion paint without primer and including thorough scrapping

800.1) Dismantling, clearing away and carefully stacking materials useful for re-use of Reinforcement cement concrete by using deploying machineries

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of One Course of Pressed Tile Roof finish in cement mortar

800.3) Clean removal of cement plaster from the existing wall surfaces

800.4) Dismantling clearing away and carefully stacking materials useful for reuse for any thickness of walls of brick masonry in cement mortar walls for additional 3m or part there of over the initial height of 3m a) Above 3.00m height

S Kumar and Co

P KARUPPAIAN