AKO-ADB-BR-05

Amount

Bill No. 1 Preliminary & Excavation Works

Excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (11.1 I ii )

Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 3.5 II

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 ( 3.4 A )

Bill No. 2 Foundationt Work

Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 (11.2 i sand filling)

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9[ Item No- 11.2, l ] Rubble Filling

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C. grade M10 (i) Nominal mix1:3:6

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 P.C.C. grade M15(i)Nominal mix1:2.5:5

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (11.4 I ii PCC M 15 )

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (12.5 iV ) RCC M 30

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (12.5 iV ) RCC M 30

Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. (11.1 B Raft foundation )Raft with cutoff

Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. (11.1 B Raft foundation )Appron with curtain wall

Prividing and fixing pressure relief pipes of 110 mm diametre of PVC as per drawing for R.C.C Raft, galaries returns, abutments, wing wall etc complete. PWD CSR 17.36

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 (14.1)

Construction of toe walls for protection of slopes as per drawing and technical specifications Clause 1302.5 14.10 i

Bill No.3: Substructure Works

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (12.5 II ii) PCC M 25

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (12.5 II ii) PCC M 25

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (12.7)

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 12.8 I Granular material

Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete.14.88

Bill No.4: Superstructure Works

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 13.1 iii I RCC M30

Providing Tar paper bearing of approved quality in proper size etc. complete (Rate as per PWD CSR 2019-20)

Expansion joint with 25 mm thich bitumenous pad (Rate as per PWD CSR for 2019-20- 14.33) 13.16 II A

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 13.1 iii RCC M 30

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 13.1 I RCC M 30 Box Return

Supplying, fitting and placing with HCRM/corrosion resistance steel of grade Fe 500 with SAIL/TATA/JINDAL/RINL/ELECTRATERM or equivalent in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 - 12.6

Providing and laying cement concrete wearing course M 30 grade Excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 (13.5)

Providing and fixing in position pipe railing consisting of IS Rolled steel joist posts designation ISMB 100 (100x50) at 2.5 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications Clause 1208.2 13.8

Bill No.5: Approach Road ,Traffic Sign, Marking & Road Safety & Road Furniture

Providing and fixing Granite / Marble tablet of 15mm to 18mm thickness ,including making groove in wall / concrete surface filling joints with slurry, curing, polishing, rounding edges, as required cleaning etc. complete. of size and description as per detailed drawings including embosseing & fitting in 1:2 C.M. border. 12.13

Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 10.3

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white color in front and gray color on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and color supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm equilateral triangle

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white color in front and gray color on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and color supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 600 mm Circular

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white color in front and gray color on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and color supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 900 mm x 600 mm rectangular

Providing and fixing Retro Reflective MMGSY / PMGSY LOGO informatory sign board with Logo as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circuler and drawing. The board will be a composite unit consisting of Two Plates of ACP (Aluminum Composite Panel), material specifications as per clause 17001.3. The top most plate will be of 3mm ACP in diamond shape of 600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The Lower plate will be of 4mm ACP of 1100x300mm size riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. Riveting of all the sheets over angle and flat iron frame will be done neatly to have plain surface on one side. The angle iron frame of Both the plates will be welded to a 75mm x75mmx 12swg Mild steel post at / Tube Centre and this post will be embeded in cement concrete M15 grade block of 450x450x600mm below ground level. The height of the bottom of the lower plate will be 1200mm from normal ground level. The spacing between the diamond shaped plate and Lower Plate is kept 150mm. MMGSY / PMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circuler no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors.”All the section of the frame and posts shall be painted with primer and two coats of epoxy paint. The design, painting and lettering shall be done as per the PMGSY signage manual Fig.1 (A) and Fig.1 (B) and as directed by Engineer in-charge. A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.

Providing and fixing of typical MMGSY Citizen information board as per specifications provided on detailed drawing of NRRDA having frame size of 2500 x 1150 mm with 75 mm square or round steel tube for support fixed in a concrete block of 60 x 60 x 75 cm size. Information as provided in drawing of NRRDA shall be displayed on a CR/GI sheet of appropriate thickness and fixed at steel frame with 5 mm steel plate. All lettering and printing arrows border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colored as mentioned in detailed drawing. All section of framed posts and steel tube shall be painted with primer and two coat of epoxy paint as per drawings. 10.16 A Citizen/Maintenance Information Board

Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702

Construction of Rounded Hump Type Speed Breaker as per IRC : 99 (1988) for general traffic as per specification, including painting, fixing cautionery boards etc. complete and as directed by Engineer-in-Charge.

Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100mm rectangular or 75mm dia. Circular reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and the drawings

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and fixing stream lined M15 grade RCC guard stone including mild steel bar reinforcement etc. complete.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

Road Delineators supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100mm rectangular or 75mm dia. Circular reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and the drawings

Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing and fixing trap/ granite/ quartzite/ gneiss guard stone/ indicator stones/ boundary stones of standard size and shape including fixing in block of_1:4:8 standard size with white washing etc.complete 6.01

Granular Sub-base with Well Graded Material (A)By Mix In Place Method.(ii) For Grading II Material.Construction of granular sub-base by providing well graded material(Crushed Metal), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Water Bound Macadam Sub-base/base (using stone screening).Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.

Construction of Subgrade and Earthen Shoulders with approved material (Hard Murum) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Modified Penetration Macadam.Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.(A) 50 mm thick.Bitumen (S-65) 60/70 - VG-30

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade / modified bitumen) Binder.Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. Case II-By Mechanical Means Bitumen (S-65 ) V-30 Using Plastic Weast.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510.B.By Mechanical Means Case ( II ): Type B (i) Bitumen (S-65)

Bill No. 1 Preliminary & Excavation Works

Excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.(Ordinary Rock)

Excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.(Hard Rock)

Excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.(Ordinary Soil upto 3m)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and crosssections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3201.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacting with vibratory roller to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Compacting original ground supporting embankment Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1.

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and crosssections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 (For Diversion)

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (for Diversion)

Bill No. 2 Foundationt Work

Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required.(For Abutment)

Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required.(For Pier)

Providing & Placing concrete PCC M-10 for plain / reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Providing concrete for plain/reinforced concrete PCC M25 in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Filling annular space around footing PCC M-15 in rock as per technical specification Clause 1203.4.3.

Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. ( For Return)

Providing concrete for plain/reinforced concrete PCC M-20 in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8

Providing & Placing concrete PCC M-15 for plain / reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302

Construction of PCC M-20 Toe Walls for Protection of Slopes as Per drawing and techinal specifications clause 1302.5

Supplying, fitting and placing with HCRM/corrosion resistance steel of grade Fe 500 with TATA/ SAIL or equivalent in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 (Toe Wall)

Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302

Construction of Toe Walls for Protection of Slopes as Per drawing and techinal specifications clause 1302.5

Bill No.3: Substructure Works

Plain/reinforced cement concrete PCC M 25 in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204

Providing factory made hydraulically pressed mechanically vibrated and compacted Precast M-50 Ready Mix controlled cement concrete of trap /granite/quartzite/gneiss metal BLOCKs of 1000mm length and 300mm to 400mm thick having various cross section areas for assembly of Arch Strip, including lifting hooks, including machined surfaced laser cut, trapezoidal steel moulds. As specified and as per IS 456:2000 including cost of all materials, preparation of casting bed, manufacturing, curing, removing from steel moulds by using crane or required machinery and stacking of blocks for preparation of arch strip of various lengths, with fully automatic micro processor based PLC with SCADA enabaled concrete Batch Mix Plant ( PAN Mixer ) With Natural / artificial sand. etc. complete. as directed by the Engineer in charge. (M-50)

Providing and laying over the area of concrete blocks HYFLEX steel wire rope – 6 X 36, steel core fixed with aluminum ferrules of required size and shape in individual block, for connecting blocks in unit arch strip. Including crimping of each ferule with wire rope using embedded steel bar of 8mm diameter and 150mm in length. Including 10mm dia steel roads for fixing wire ropes, including M-50 grade Ready Mix cement concrete of 60mm thickness, mechanically vibrated and compacted above linearly and parallelly arranged precast blocks placed on ISMC 100 base to form a layer of SCREED over unit arch strip. Including Including Z-plate acting as form work and steel separation plate of 10mm thickness over individual joint. As specified and as per IS 456:2000 including cost of all materials, preparation of level bed, curing, , including lead of all materials up to RMC plant / casting yard, etc. complete. as directed by the Engineer in charge. (M-50)

Providing factory made hydraulically pressed mechanically vibrated and compacted Precast M-50 Ready Mix controlled cement concrete of trap /granite/quartzite/gneiss metal for SOCKET of 1000mm length having various cross section as per approved drawings, including lifting hooks, including machined surfaced laser cut, trapezoidal steel moulds. As specified and as per IS 456:2000 including cost of all materials, preparation of casting bed, manufacturing, curing, removing from steel moulds by using crane or required machinery and stacking of blocks for preparation of arch strip of various lengths,with fully automatic micro processor based PLC with SCADA enabaled concrete Batch Mix Plant ( PAN Mixer ) With Natural / artificial sand. etc. complete. as directed by the Engineer in charge. (M-50)

Providing Lifting, transportation and placing activities of precast arch units and sockets from casting yard / RMC plant to construction site including all necessary lifting arrangements in hydraulic telescopic cranes of appropriate lifting capacity, transportation on flat bed trailer of required length, including lifting slings with D-shackle, pulling ratchets, including ISMC 300 steel supporting cross beam, two numbers of P type 10 ton capacity chain pully , including temporary supports for lifting and transporting on trailers, including construction of leveling platform crane and trailer, including scaffolding and platform at pier / abutment top level, including necessary all manpower., etc. complete., as directed by Engineer In Charge.

Providing and laying in situ / ready mix M10 cement concrete of trap /granite /quartzite /gneiss metal for haunch filling including compacting, curing, mixing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Natural / VSI standard Artificial Sand) Spec.: BR45 Page No. 139 ( For haunch Fill )

Providing trap/ granite/ quartzite/ gneiss rubble filling over haunches and arches including hand packing etc. complete. BR.46 Page No. 140

Plain/reinforced cement concrete PCC M-20 in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204

Supplying, fitting and placing with HCRM/corrosion resistance steel of grade Fe 500 with TATA/ SAIL or equivalent in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Plain/reinforced cement concrete in PCC M-20 substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204

Supplying, fitting and placing TMT bar reinforcement (Fe 415) SAIL/ TATA/ JINDAL/ RINL/ ELECTRATERM or equivalent in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Providing weepholes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8

Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete.

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302

Bill No.4: Superstructure Works

Providing and laying reinforced cement concrete PCC M-20 in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5

Providing and laying cement concrete wearing course M 30 grade Excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3

Supplying, fitting, and placing HCRM/corrosion resistance steel of grade Fe 500 with TATA / SAIL or equivalent in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202

Providing fitting and fixing mild steel railing complete as per drawing and technical specifications Clause 1208.2

Providing and laying cement concrete wearing course RCC M 30 grade Excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3

Supplying, fitting, and placing HCRM/corrosion resistance steel of grade Fe 500 with TATA / SAIL or equivalent in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 (TMT for Wearing Course)

Expansion joint with 25mm thick bitumenous pad / Compressible Rubber Pad (Rate as per PWD CSR for 2018-19) BR 43 B Item no.14.33 pg no.123

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Page No. 369

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. As directed by Engineer in charge.

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. As directed by Engineer in charge.

Bill No.5: Approach Road ,Traffic Sign, Marking & Road Safety & Road Furniture

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST levied by GOI and GOM in all respect, including inspection charges, transport to departmental stores/site, unloading and stacking etc. complete as per IS458/1988

Providing and fixing Granite / Marble tablet of 15mm to 18mm thickness ,including making groove in wall / concrete surface filling joints with slurry, curing, polishing, rounding edges, as required cleaning etc. complete. of size and description as per detailed drawings including embosseing & fitting in 1:2 C.M. border.

Construction of subgrade with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Construction of earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.

Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80- 100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.Cement Concrete

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.pipe

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. (excluding seal coat)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using TypeA, TypeB (by Paver finisher) and TypeC as per Technical Specification Clause 510

Providing and fixing Retro Reflective MMGSY/PMGSY LOGO informatory sign board with Logo as per section1700 of MORD specification sand latest PMGSY Signage Manual / Circuler and drawing. The board will be acomposite unit consisting of Two Plate sof ACP (Aluminum Composite Panel), material specifications as per clause 17001.3. The topmostplate will be of 3mm ACP india mond shape of 600 x 600 mm size, riveted with MS angle iron frame of 25mm x 25mm x 5mm size on back onedges. The Lower plate will be of 4mm ACP of 1100 x 300mm size riveted with MS angle iron frame of 25mm x 25mm x 5mm size on backonedges. Riveting of all the sheets over angle and flat iron frame will be done neatly to have plain surface on one side. The angle iron frame of Both the plate swil lbe welded to a75mm x 75mm x 12swg Mild steel pos tat / Tube Centre and this post will be embeded in cement concrete M15 grade block of 450 x 450 x 600mm below ground level. The heigh tof the bottom of the lower plate will be 1200mm from normal ground level. The spacing between the diamond shape dplate and Lower Plate is kept 150mm .MMGSY / PMGSY logo, letter sand numeralson the ACP should be made up of Retro Reflective sheeting of Class-A / ClassB grade as per the latest MORD section 1700 specifications (Refer Circulerno. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/ MMGSY Logo/ Project description on ClassA or ClassB type retroreflective sheeting using modern technology printing platform. The printer shall be approved by there tr or eflective sheeting manufacturer and printed sign shall conform to retroreflective values as laid down in IRC 67 2012. The inks used for printing shall be ecofriendly with VOC emission scomplying to UL2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5years & 7years for ClassA and ClassB sheeting respectively for traffic colors.” All the section of the frame and posts shall be painted with primer and two coats of epoxy paint. The design, painting and lettering shall be done as per the PMGSY sign age manual Fig.1(A) and Fig.1(B) and as directed by Engineerin-charge. A warranty for 5/7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.

Providing and Fixing of Retro Reflectorised 900mm Cautionary sign boards made out of retro reflective sheeting of High Intensity prismatic grade conforming to IRC 67:2012 & Type IV standards of ASTM D4956 -09 specifications, fixed over 4mm thick ACP sheet supported with Back support frame of 25 x 25 x3mm mild steel angle as approved, supported on a mild steel angle iron post 65mm X 65mm X 6mm -3.5 mtr height, firmly fixed to the ground by mean sof properly designed foundation with M20 grade cement concrete 45cm X 45cm X 60cm, 60cm below ground level as per approved drawing. Both borde r& background shall be retro reflective as per Type IV standards. 7years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independ enttes tlab for the product offered shall be submitted by the contractor (Bottom of the board shall be atl east 2.6mtr. above ground level) Specification:IRC67:2012. There shall be as tamp behind the ACP sheet carrying the name of the supplier, Name of sheeting Manufacturer, Type of retroreflective sheeting, Installation month & year, Warranty period for retro reflective sheeting. 800mm x 600mm Rectangular

Providing and Fixing of Retro Reflectorised 900mm Cautionary sign boards made out of retro reflective sheeting of High Intensity prismatic grade conforming to IRC 67:2012 & Type IV standards of ASTM D4956 -09 specifications, fixed over 4mm thick ACP sheet supported with Back support frame of 25 x 25 x3mm mild steel angle as approved, supported on a mild steel angle iron post 65mm X 65mm X 6mm -3.5 mtr height, firmly fixed to the ground by mean sof properly designed foundation with M20 grade cement concrete 45cm X 45cm X 60cm, 60cm below ground level as per approved drawing. Both borde r& background shall be retro reflective as per Type IV standards. 7years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independ enttes tlab for the product offered shall be submitted by the contractor (Bottom of the board shall be atl east 2.6mtr. above ground level) Specification:IRC67:2012. There shall be as tamp behind the ACP sheet carrying the name of the supplier, Name of sheeting Manufacturer, Type of retroreflective sheeting, Installation month & year, Warranty period for retro reflective sheeting. 600mm Equilatrel triangle

Providing and fixing of typical PMGSY Retro Reflective information board as per as per section 1700 of MORD specification sand latest PMGSY Sign age Manual / Circuler and drawing. Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottom duly rivetted with MS angles of 35 x 35 x 5mm thick M. S angle shall be welded by two vertical M.S angle of 5mm thick to 75mm x 75mm of 12S WG square tubes / 75mm Dia Pipe post sduly embedded in cement concrete M-20 grad eblocks of 600mm x600mm x75mm, below ground level. MMGSY/PMGSY logo, letter sand numeral son the ACP should be made up of Retro Reflective sheeting of Class-A /Class-B grade as per the latest MORD section 1700 specifications (Refer Circulerno.NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/ MMGSYLogo/ Project descriptionon ClassA or ClassB type retroreflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IR C67-2012. The ink s used for printing shall be ecofriendly with VOC emissions complying to UL 2801 standardsa nd specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5years & 7years for ClassA and ClassB sheeting respectively for traffic colors. All section sof framed post sand steel tube will be painted with primer and two coats of epoxy paint sas per drawing Clause 1701 and Annexure 1700.1(10.16). The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.3 and Fig.4 and as directed

Construction of earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.(for Diversion)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(for Diversion)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.bitumen)(for Diversion)

Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,protectionworks, backfilling, concrete and masonry works in head walls and parapets Clause 1106.6.(for Diversion)

M/s A M Kothari