Improvement works to the Uppilipalayam Corporation Middle school in Ward No.60, East Zone.

Earth work excavation for foundation in ordinary soil. light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift 10 m

Providing and laying well gravel including cost and conveyance of all materials from approved quarries as noted in lead chart to the road side including loading. unloading and stacking the well gravel at road side to departmental gauge for pre-measurement including labour charges for laying spreading leveling to camper etc.. complete as per specifications

Plain cement concrete 1:4:8 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying,consolidating, curing, cost and conveyance of all materials to site and all labour charges etc.,complete as per standard specification 1 m3 (detailed data for 10 m3)

Plastering with C.M. 1:5 Mix (one cement and five sand) 12mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.

Special Ceiling Plastering for RC slabs and beams with cement mortar 1:3 mix 10mm thick including hacking etc., complete 10 m2

Providing Green board on walls in cm 1:3 mix 12mm thick using necessary black board ingredients etc., completed

Flooring with Stain free Nano polish Vetrified flooring tiles of size 600 x 600 x 8mm of approved colour and quality of required size laid in cement mortar 1:3 mix 20mm thick and pointing with the same mortar complete and finish very neatly etc complete

Supplying & fixing of PVC, UPVC pipes and spcials

110mm Pvc pipe 6kg/cm2

75mm Pvc pipe 6kg/cm2

110mm Elbow

75mm Elbow

75mm Door tee

50mm Pvc pipe 6kg/cm2

50mm Elbow

50mm Tee

20 mm UPVC pipe 10 kg/cm2

20 mm UPVC elbow

20 mm UPVC Tee

20 mm UPVC Coupling

25x20 min UPVC Reducer

20 mm Hex nipple

Long body tap

PVC paste 250 ml

Suplly and fixing of Stain less steel sink 600mm x E 450mm x 200mm

Plain cement concrete 1:2:4 mix (One cement two M.Sand and four aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating. curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification -1 m3 (detailed data for 10 m3)

Flooring with 20mm thick cement concrete 1:3 mix (no sand to be used) using 3mm to 10mm ISS gauge HBBG chips and the surface rubbed hard and finished smoothi with neat cement Ellise pattern surface 1 sort

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 3041. Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing. bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Painting with best synthetic enamel paint of approved Colour two coats for new fron work including one coat of best quality synthetic enamel paint etc complete priming coat and using the best quality Iron primer and complying with standard specification

Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required 1 m2

Painting with Terra coat paint two coat including all m2 labour charges as per direction of departmental officers..

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V)32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with M continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour.

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point fan point

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mm x 100mm x 75mm MS switch box with 3mm thick hylum sheet cover for SA 3pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box in flush with wall with 3mm thick hylum sheet for 15A 3pin non interlocking flush type CS plug with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for open power plug point

Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) incandescent lamp with 11 Watts CFL Bulb Suitable for Bulb

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting

Supplying and fixing of 1200mm(48")sweep AC ceiling fan complete with stepped electronic 300W Regulator with I metre down rod with fan clamp with side plates and crpss arm of size 450mm(16")

Supplying and fixing of 15 A aerial fuse unit (500A)on suitable 100x100 mm TW concealed box with iron sheet tapping pole with necessary clamps.(ELECTRICAL DATA 23-24 P-60 SD-128) No on the

Supply and fixing of 2 core 4sq.mm PVC copper UG cable including all labour charges

Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the Gl pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supplying and fixing of Cudappa slab of 40mm thick for Cup board including cost of materials and labour etc complete (CBE DATA 23-24 P-133)

Roofing with Pre painted Galavalume sheet 0.47mm thick with necessary bolt and nuts and washers including allmaterials and labour charges etc complete 10m2

Supply and Fixing of 48W LED Street light Fitting with necessary Bowl and Bracket and Bulp as per Standard Quality as per the Direction of the Departmental officers etc., complete.

Supply and Fixing of 1HP Monoblock Pump as per Standard Quality as per the Direction of the Departmental officers etc., complete.