DAY TO DAY MAINTENANCE OF INTERNAL ELECTRIFICATION AT BIKRAM ENCLAVE, NCSR AREA, RO, FD SUB GP, HQ SIG GP, CMDC, ASCON NODE AND SAPPER ENCLAVE UNDER AGE E/M, GE (SOUTH) UDHAMPUR

Amount

Repairing of unserviceable light point, Fan point, socket point 5A/15A, switches, sockets or regulator, ceiling rose, light fixtures any type (Piano/modular), any type MCBs, DB's and all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect, including small length of wires upto 2.5 sqmm single core (not more than 1.5 mtr), adhesive tape and other connected accessories like screws & washers etc. Work shall also include to check & removal of breakages in service connection/sub main of houses as and when directed. The scope of work shall also include cutting of existing Bakelite sheet to accommodate new wiring accessories like switches, sockets, fan regulators etc complete all as specified and directed. Note - 1. Any defective/unserviceable items replaced shall be measured and paid seperaetly under the respetive items of BOQ.

Note:-(a)Contractors representative/Engineer will report to JE E/M/Engr-in-Charge daily at forenoon and afternoon to collect routine/urgent works related to internal electric supply till completion of contract. The work shall be attended by the contractor immediately. The contractor will ensure availability of manpower equipped with all sort of petty items such as insulation tape, galvanised screws, nuts, bolts, washers etc required to accomplish the job. The contractor will also ensure as availability of every type of requisite T&P items to his trades man. All routine/ urgent jobs received on job slip will be repaired and got signature of user's and will be deposited to JE E/M with in 24hrs. In case of any delay in attending the complaint more than 8 hrs after handing over of routine and 2 hrs for urgent works, the contractor shall be liable to pay the penalty as described in penalty clause given here as under.

(b) The penalty shall be applicable to the contractor if the delay is noticed by the Engr-in-Charge more than twelve hrs after handing over works of urgent nature to the contractor. The Engr-in-Charge/JE E/M shall handover the slip containing specification of work to the contractor by lodging the time and signature of contractor be obtained on slip. The contractor shall attend the job immediately and shall report to Engr-in-Charge within 12 hrs. The contractor will keep his tradesmen in stand by for attending any routine/ urgent works from the executive. If the nature of job is such that the work cannot be completed within period of 12 hrs then the facts shall be brought to the notice of the GE/Engr-in-Charge and the period for the working to the complaint shall be decided by the GE/Engr-in-Charge. If the delay is more then twelve hrs period and the GE is not satisfied with the reason for delay then penalty at the rate of Rs 50 per job shall be deducted from the dues of the contractor. Please note that this penalty is exclusively other then the condition 50 of IAFW-2249 and shall be treated as interim condition of the contract and shall enforceable as and when delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Deptt. The decision of the Accepting Officer is this regard shall be final and binding.

(c) One loged Complaints slip, is to be treated as One Complaint in irrespective of No. of Repairs mentioned in the same. (d) Contrctor to keep his Electrician ready for Urgent Complaints, During odd hours (0600 Hrs to 0900 Hrs and 1700 Hrs to 2200 Hrs) Other than the Regular complaints during working Hrs (0900 Hrs to 1700 Hrs) (e) Procurement of Security gate passes of the Electrician, will be sole responsibility of the Contractor as per CA provision. (f) The contractor shall maintain a record of all repairs including urgent work at site and if the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the Govt.

Switch piano type 5 Amps 230 volts one way including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch piano type 15 Amps 230 volts one way including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch-socket combination 5 Amps, 5 pin multipurpose including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch-socket combination 15 Amps, 6 pin multipurpose including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Socket outlet 5 pin, 5 Amps combined including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Socket outlet 5 pin, 5 and 15 Amps flush type combined including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block complete all as specified and directed by Engr-in-Charge. Make - Anchor/Havells/Kinjal

Lamp holder PVC/Polycarbonate with cord grip suitable for pendant/Batten fittings including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Bell push 230 volts, including taking down old one AC complete all as specified and directed. Make - Anchor/Havells/Kinjal

Replacement of call bell ding-dong 230 volts including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch-socket combination 5 Amps, 5 pin multipurpose with PVC Box, 4 holes including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch-socket combination 15 Amps, 6 pin multipurpose with PVC Box, 4 Holes including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch modular type, 1 module, 6 Amps, 230 volts one way including taking down old one complete all as specified and directed. Make - Anchor/Havells/Indoasian

Switch modular type, 1 module, type 16 Amps 230 volts one way including taking down old one complete all as specified and directed. Make - Anchor/Havells/Indoasian

Socket outlet modular type, 2 module, 6 Amps combined including taking down old one complete all as specified and directed. Make - Anchor/Havells/Indoasian

Socket outlet, modular type, 2 module, 2-in-1, 16 Amps combined including taking down old one complete all as specified and directed. Make - Anchor/Havells/Indoasian

Two way switch modular type, 1 module, 6A, 230 volts including taking down old one complete all as specified and directed. Make - Anchor/Havells/Indoasian

Bell push modular type, 1 module, 6A, 230 volts, AC including taking down old one complete all as specified and directed. Make - Anchor/Havells /Indoasian

Supply of fan regulator modular type, 2 module, 230 V, step type, 100 watts complete all as specified and directed. Make - Anchor/Havells /Indoasian

Modular white cover plate with Frame, 1 & 2 Module complete all as specified and directed. Make - Anchor/Havells/Indoasian

Modular white cover plate with Frame, 3 Module complete all as specified and directed. Make - Anchor/Havells/Indoasian

Modular white cover plate with Frame, 4 Module, complete all as specified and directed. Make - Anchor/Havells/Indoasian

Modular white cover plate with Frame, 6 Module complete all as specified and directed. Make - Anchor/Havells/Indoasian

Modular white cover plate with Frame, 8 Module complete all as specified and directed. Make - Anchor/Havells/Indoasian

Supply of fan regulator 230 V, step type/socket type, hum free 450 watts including taking down old one complete all as specified and directed. Make - Anchor/Havells/Legrand

Fan regulator 230 V, step type/Piano type, hum free 100 watts including taking down old one complete all as specified and directed. Make - Anchor/Havells/Legrand

Fan Capacitor/condenser of 3.15 MF, cylindrical capacitor, with plasitc casing, copper terminal, typically used for Fans complete all as specified and directed. Make - Epcos/Matrix/Anchor

LED coloured lamp (RYG color) of 0.5 watt, B-22 base cap complete all as specified and directed. Make-Havells, Cat Part No : LHLDAFUEUPNX0X5/Bajaj/CG

Sheet metal enclosure MCB distribution board single pole and neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification including taking down old one complete all as specified and directed. Make - Indoasian / Legrand / Standard. Note - MCBs will be measured separately.

Sheet metal enclosure MCB distribution board single pole and neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification including taking down old one complete all as specified and directed. Make-Indoasian/Legrand/ Standard Note - MCBs will be measured separately.

Replacement of Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB of any cap from 10Amp to 20Amp, 10KA complete all as specified and directed. Make-Indoasian/Legrand/ Standard

Replacement of Sheet metal enclousers, TPN Distribution board 4 way, double door IP-43 protection, including fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed. Make - Indoasian/Legrand/Standard Note - MCBs will be measured separately.

Replacement for VTPN MCCB DB-Double Door (Including 63 Amp MCCB) 16 kA (as Incommer) 4 way double door IP-43 protection complete all as specified and directed, including All PCC and Cementing work for installation of VTPN DB to Wall, deemed to be quoted rate by contractor. Make - Indoasian, Cat Part No - 811870 or equivalent in polycab/Legrand. Note - Any defective/unserviceable items replaced shall be measured and paid seperaetly under the respetive items of BOQ.

Replacement MCB single pole 240 volt any rating from 6 to 32 Amps, 'B' Series with Bearing capacity 10 KA complete all as specified and directed. Make-Standard, Cat Part No - DSMSBSPF006-032 or equivalent make in Indoasian/Legrand

Replacement MCB Single Pole and Neutral 240 volt any rating 63 Amps, 'B' Series with Bearing capacity 10 KA complete all as specified and directed. Make - Indoasian, Cat Part No - 811037 or equivalent make in Standard/Legrand.

Replacement MCB Single Pole and Neutral 240 volt any rating 40 Amps, 'B' Series with Bearing capacity 10 KA complete all as specified and directed. Make - Indoasian, Cat Part No - 811035 or equivalent make in standard/Legrand.

Replacement MCB Three Pole and Neutral 240 volt any rating 63 Amps, 'B' Series with Bearing capacity 10 KA complete all as specified and directed. Make - Indoasian/standard/Legrand.

Slim type 36/40 Watt 2 x 2 LED Flat Panel light with diffused optics (600 x 600 x 12 mm) complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable complete all as per the directions of Engr-in -Charge. Make - HPL or equivalent make in Havells/Syska/Wipro.

Slim type 34/40 Watt 2 x 2 LED Flat Surface Panel light complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable complete all as per the directions of Engr-in-Charge. Make-Havells(pluto) PLUTOSURFACE2X2PLS34WLED840S or equivalent make in Syska/Wipro

Replacement of Slim linear LED tube light fixture 22/24 Watt as per 4 Ft white, Garnet Batten, , Complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and directed. Make - HPL or equivalent make in Havells/Syska/Wipro

Replacement of Slim linear LED tube light fixture 20 Watt as per 4 Ft white, Garnet Batten, Complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and directed. Make -HPL or equivalent make in Havells/Syska/Wipro

Replacement of Slim linear LED lighting fixture 10 Watt LED Batten 2 Ft, with full base of extruded aluminium section acting as a heat sink with closed back, Complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable from ceiling rose to fitting complete all as per the directions of Engr-in- Charge. Make -HPL or equivalent make in Havells/Syska/Wipro

Replacement of Slim linear LED lighting fixture 5 Watt LED Batten, For mirror light purpose, Complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable from ceiling rose to fitting complete all as per the directions of Engr-in- Charge. Make - HPL or equivalent make in Havells /Syska/Wipro

Replacement of Slim linear 9/10 watt LED Bulk Head Light energy saving with IP65 with opal diffuser, pressure die cast aluminium housing complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable from ceiling rose to fitting complete all as per the directions of Engr-in- Charge. Make -HPL or equivalent make in Havells/Syska/Wipro

Replacement of Surface type 12 Watt LED Peocock, 6000K, wall/ceiling mounted fixture with electronic driver and opaque diffuser, suitable for indoor applications complete all as specified and directed. Make-Havells, Cat Part No - LHEOFIP7CUZ1W012/Bajaj/CG

Pull down Hanging/pendants lights with plastic ceiling cup that supports the spiral wire and main shade (steel) with complete E27 Holder and retro type Lamp including connection with ceiling rose complete all as specified and directed by Engr-in Charge. Make -HPL or equivalent make in Havells/Syska/Wipro

Replacement of wall mounting, SS finish fixture with opal glass diffuser suitable for LED lamp (Including LED lamp) complete all as per the directions of Engr-in-Charge. Make -HPL or equivalent make in Havells/Syska/Wipro

1 x 18 watt Ultra bright LED PL-L 4 pin lamp with very high efficacy suited for installation in existing 2G11 lamp holders/36watt ceiling panel lights complete all as specified and directed by Engr-in- Charge. Make -HPL or equivalent make in Havells/Syska/Wipro

15 Watt Surface Mounting squre type fitting, housing made of extruded PC complete all as per the directions of Engr-in-Charge. Make -Wipro or equivalent make in Havells/Syska/HPL

Floret Surface mounting fitting alongwith 9 watt LED lamp complete all as per the directions of Engr-in-Charge. Make - Havells/Syska/HPL

Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20 mm bore with funnel and wire mash and light grade GI protection pipe 15 mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion complete all as specified and directed.

Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including not less than 2.00 mm thick 20 mm dia over PVC Non metallic Rigid PVC Conduit (ISI marked) with 1.25 mm thick pressed steel terminal MS boxes recessed on walls, painted the same inside and out side with one coat of black bitumen paint including inner and laminated sheet for, piano switches/sockets/regulator etc along with PVC insulated and insheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead, to match with the existing specification complete all as specified and directed by Engr-in-Charge. Make-HPL or equivalent make in polycab/finolex

All as per ser item No 54 but for 05 Amp socket outlets point controlled by one switch on Independent board complete all as specified and directed.

All as per ser item No 54 but for 05 Amp socket outlets point controlled by one switch on Same board complete all as specified and directed.

All as per ser item No 54 but for 15 Amp socket outlets point controlled by one switch on Independent board with 2.5 sqmm size of copper cable complete all as specified and directed.

Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including not less than 2.00 mm thick 20 mm dia and over concealed PVC non metallic rigid PVC conduit (ISI marked) with 1.25 mm thick pressed steel terminal boxes (modular type) concealed for fixing of modular switches/regulator etc along with PVC insulated and insheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead in and inculding PVC Concealed Conduit medium grade with all fitting (ISI make) complete all as specified and directed by Engr-in-Charge, including modular cover plate with frame, making good the disturbed surfaces to match with the existing specification. Make -HPL or equivalent make in polycab/Havells

All as per ser item No 58 but for 05 Amp socket outlets point controlled by one switch on Independent board complete all as specified and directed.

All as per ser item No 58 but for 05 Amp socket outlets point controlled by one switch on Same board complete all as specified and directed.

All as per ser item No 58 but for 15 Amp socket outlets point controlled by one switch on Independent board with 2.5 sqmm size of copper cable complete all as specified and directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in and including PVC surface/concealed conduit 25 mm dia including PVC insulated copper conductor cable 6 Sqmm as earth lead complete all as specified and directed. Including taking down old sub main wire.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC casing and caping including PVC insulated copper conductor cable 4 Sqmm as earth lead complete all as specified and directed. Including taking down old sub main wire.

Trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of Sqmm 16 x 4 core size complete all as specified and directed including taking down old cable. Note : Earth work and other connected work shall be measured and paid seperately.

Trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of Sqmm 25 x 3.5 core size complete all as specified and directed including taking down old cable. Make -Havells or equivalent make in polycab/KEI. Note : Earth work and other connected work shall be measured and paid seperately.

Excavation in trenches and not exceeding 1.5 m wide and not exceeding 1.5 m in depth in hard/ dense soil and getting out complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying and streching the cable in trenches, including hand punning and consolidating complete all as specified and directed. Note :for payment purpose punned thickness shall be measured.

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

GI tubing light grade 40 mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

Repalcement of LED street Light fitting 35 Watt, New generation energy saving and environmental friendly long life versatile pressure die-cast aluminium IP66 with acrylic, with Heat resistant toughened Glass, Corrosion resistant complete all as per the directions of Engr-in-Charge. Make -Havells, Cat Part No - LHETBXU7PAIS035 (ENDURA CITYLITE PLATINUM PLUS)/Bajaj/CG

Street light Bracket complete made of GI pipe of suitable size of 32 mm dia, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall, including taking out old bracket complete all as specified and directed by Engr-in-Charge.

ARNABH ASSOCIATES

HIMALAYA ENTERPRISES

VISHWANATH AND SONS

DEV RAJ MAGOTRA

S S BUILDERS

SINGH CONST CO