Repariring of Record room and Hindi Section Office Building. Lot-3

Amount

Repairing Work of Building

Dismentling cement concrete or bricks or granolithic floring including base concrete (s.i.no.697 UP PWD BULANDSHAHR CIRCLE)

Dismentling brick work or stone work or stone work work in lime or cement mortar and including stacking of materials as directed de the Engineer in charge with in distence of 60 meter (200 feet) (S.I.No.692 UP PWD BULANDSHAHR CIRCLE)

Sand filling in plinth including supply of necessary sand from a distance not exceeding 8km from the site of work and including watering dressing etc, labour and T&P etc required for the proper completion of work. Sapling of girth upto 30 cms measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of area cleared.As per PWD SOR Ch No-4, Item no-255

cement concrete with 40mm gague brick blast ,fine sand and cement proportion of(12:6:1) including supply of all material ,labour,tools and plants etc (S.I no. 273)

Providing and laying in position grade of reinforcement cement concrete ,excluding the cost of centring ,shuttering , finishing and reinforcement - all work up to plinth level in 1:1.5:3 cement, coarse send and 20 mm stone grit ( S.I.NO.5.1.2 CPWD 2016)

M-150 Brick 1:4 cement and coarse sand f.m of 2.20 (1 cement :4 C/A) mortar in foundation and plinth level including supply of all materials,labour and T&P .required for proper complition ( S.I 305 a UP PWD BULANDSHAHR CIRCLE)

2.5 cm thick DPC with cement , coarse sand and 20 mm approved grit consisting 1:1.5:3 including water profing materials as orderd by the engineer in charge in the proportion as specification by the manufacture .(S.I.No.361 UP PWD BULANDSHAHR CIRCLE)

Centering & Shuttering for RCC/RB work including cost of centering & shuttering upto 4.50 m height

M.S.(tor steel or plain ) in plain work such as R.C.C or R.B.C work including bending for proper shape as necessary including bending proper complition of work and including supply of all materials (S.I 504)

12mm plaster with cement and fine sand of 1.25 F.M in 1:4 over brick work minimum thickness not be less than 1 cm. including supply of all materials,labour,tools & plants etc. required for proper coomplition of the work (S.I.No.584 UP PWD BULANDSHAHR CIRCLE)

Providing Birla putty on new interior or exterior surface over one coat of water based cement primer or ICI or equivalent brand for smoothening & leveling of the surface as per requirement and direction of engineer in charge including cost of all materials & T&P required for completion.

Distemper two coat with oil bound distemper of approved brand and manufactrue and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primery of approved brand such as Berger , J& K , Shalimar , Asian Paints after thorought brushing the surface free from mortar Dropping and other foreingn matter and also including the surface even with plast of paris or approved sysnthtic materials and also including supply of materials , labour , tools & plants etc. required for proper complitions.(S.I.No. 649+650 UP PWD BULANDSHAHR CIRCLE)

Finishing wall with one coat of water proof cement paint of approved quality on new surface with two coat to give an even shade including supply of all materials, lanour, tools & plants etc required for proper completion of work. For weather coat (Asian or Berger brand) As per PWD SOR Ch No-15, Item no 660 New Item

Supply and fixing doors including materials,labour,tools,all fittings,paints,polish and plants etc. required for proper complition

Supply and fixing window including materials,labour,tools,all fittings,paints, polish and plants etc. required for proper complition

S/F 10 mm thick glazed/matt finished tiles of size 600x600 or more of approved company like RAK, JOHNSON, SOMANY or equivalent make of approved shade, colour and pattern as directed by engineer incharge in floor, skirting or dado laid with 1:3 cement and course sand mortar with approved quality adhesive finished with white cement and pigment to made the tile shade etc, complete including supply of all material, labour and T&P required for completion of work.As per ID SOR Ch No-VII, S.No-9

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms(S.I. NO. 17.75 D.S.R 2016)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively(S.I. NO. 17.23 D.S.R 2016)

Providing and fixing water closet squatting pan ( Indian type W.C pan) with 100 mm sand cast iron P and S trap,10 liter low level white PVC flushing cisten , including flush pipe , with manualy controlled devise (handle level) conferming to IS:7231,with all fitting and fixtures complition,including cutting and making good the walls and floors wherever required (S.I.No. 17.1.1 CPWD 2016)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank((S.I. NO. 18.48 D.S.R 2016)

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore(S.I. NO. 18.15.1 D.S.R 2016)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes(S.I. NO. 18.8.1.1 D.S.R 2016)

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap(S.I. NO. 17.7.2.1 D.S.R 2016)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.17.32.2 Rectangular shape 453x357 mm(S.I. NO. 17.32.2 D.S.R 2016)

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms(S.I. NO. 18.65 D.S.R 2016)

Providing and fixing toilet paper holder : C.P. brass(S.I. NO. 17.34.1 D.S.R 2016)

Providing and fixing soil, waste and vent pipes :100 mm dia 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 (S.I. NO17.35.1.1 D.S.R 2016)

Excavation in ordinary soil in foundation lead up to 30m and lift upto 1.50 m (s.i.no.251a)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :Cement mortar 1:3 (1 cement : 3 coarse sand) (S.I. NO 6.12.1 D.S.R 2016)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)(S.I. NO 13.7.1 D.S.R 2016)

Making drip course in sun shades or facia with 1:3 cement and fine sand mortar as per direction of engineer incharge including supply of all materials, labour, tools & plants etc required for proper completion of the work( As per PWD SOR Ch-12, Sno-13.18)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections. (As per DSR 2016, Item no-12.58)

Dismantling corrugated Iron roofs walls or partitions, including purlins, battens and vertical supports and including stacking of material as directed by engineer incharge within a distance of 60 m.

Providing & laying 60 mm thick factory made cement concrete interlocking paver block M30 grade made up of block making machine with strong vibratory compactor of approved size design & shape laid in required colour & pattern over and include 50 mm thick compacted bed of course sand , filling the joints with line sand etc, all complete as per direction of engineer incharge. As per DSR 2016 Item no- 16.68.

SAKSHAM BUILDERS