Tender ID

CPPP

Cancelled

Works

Civil Works

SITC of LPG Gas Line including all other necessary related works in Patient diet kitchen Block no-9 LGF in Hospital Building at AIIMS Bhopal.

All India Institute of Medical Sciences-Bhopal

AIIMS BHOPAL | Bhopal, Madhya Pradesh

Amount: ₹9.1 LCloses: 7 May 2026Closed

Timeline

Published15 Apr 2026
Closed7 May 2026
Cancelled10 Jun 2026

Corrigenda

Corrigendum

3 updatesLatest on 7 May 2026Submission Ends:7 May 202622 May 2026

Date changes

Download Ends7 May 202622 May 2026Submission Ends7 May 202622 May 2026Bid Opening8 May 202623 May 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderCancellation of TenderReason: Error in Creation of TenderDocument: cancelled_1.pdf

Published 10 Jun 2026

Tender Value

₹9.1 L

Closing Date

7 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Superintending Engineer

Address

4th Floor Kautilya Bhawan, AIIMS BHOPAL

Work Description

SITC of LPG Gas Line including all other necessary related works in Patient diet kitchen Block no-9 LGF in Hospital Building at AIIMS Bhopal.

Tender Information

Tender ID

2026_IMSBP_905375_1

Reference Number

01/NIQ/SE/CIVIL/ABEU/ AIIMS/BPL/2026-27

Tender Type

Limited

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

45 days

Location

AIIMS BHOPAL

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

1 document required · 1 mandatory

Fee/PreQual/Technical/Finance

RequiredSoQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

Exempted

Important Dates

Last Activity

10 Jun 2026

Published

15 Apr 2026

Bid Opening

8 May 2026

Download Starts

15 Apr 2026

Download Ends

7 May 2026

Submission Starts

15 Apr 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (16 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1.1	1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)	2.31	Cum	-	-
2Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
2.1	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	834.61	Kg	-	-
3Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :
3.1	Two or more coats on new work	39.44	Sqm	-	-
4	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	23.01	Sqm	-	-
5SITC of 1 inch dia LPG Cylinder Manifold for 10 X 2 = 20. Cylinders of 19 Kg Capacity with 10 working and 10 stand by cylinder header each separated by 25 mm dia ball valve of class 200. The header made out of CS Seamless Sch- 40 Pipes of 25mm NB including all MECVs, Socket fittings, 25mm clamps set, painting etc, with isolation valve on both the header. Isolation valve for complete isolation of manifold. Manifold tested at 360 psi or 25.4 kg/cm2 . With Double Bottle Connection having MECV coupling to join the two manifolds tested at 360 psi. Flat nitrile rubber- 80 no (approx.) etc complete as directed and approved by Engg-in-charge.
6	SITC of Flexible Cylinder Pigtail suitably connected to manifold made out of braided LPG hose Suraksha house suitably designed for commercial usage with working pressure of 20 Kg/cm2 fitted with LPG -10 nos, Non Return Valve made out of Forged Brass, fitted between the cylinder pigtail and manifold, does not allow the L.P.G. to flow back from manifold to burst pigtail- 10nos & Compact Valve Cylinder Adapter for making connection to cylinders, with MECV thread to withdraw unreduced pressure Size-25.6xMECV- 10 nos etc complete as directed and approved by Engg-in-charge.	2	Set	-	-
7	SITC of High Pressure Regulator: with inlet pressure range- 1 to 17 Kg/cm2 , outlet pressure range- 0.5-10 Kg/cm2 , and gas flow rate- 100Nm3 /hr. Filter: used separate impurities of LPG with Working pressure-20 Kg/cm2 , gas flow rate- 200Nm3 /hr. Inlet and Outlet size: 1” BSP etc complete as directed and approved by Engg-in-charge.	1	Each	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.39 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.64 MB

Work Item Documents

LPGpipelineNIQfnl.pdf

Tender Documents • 10.26 MB

BOQ_951639.xls

BOQ • 0.35 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1.1	1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)	2.31	Cum	-	-
2Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
2.1	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	834.61	Kg	-	-
3Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :
3.1	Two or more coats on new work	39.44	Sqm	-	-
4	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	23.01	Sqm	-	-
5SITC of 1 inch dia LPG Cylinder Manifold for 10 X 2 = 20. Cylinders of 19 Kg Capacity with 10 working and 10 stand by cylinder header each separated by 25 mm dia ball valve of class 200. The header made out of CS Seamless Sch- 40 Pipes of 25mm NB including all MECVs, Socket fittings, 25mm clamps set, painting etc, with isolation valve on both the header. Isolation valve for complete isolation of manifold. Manifold tested at 360 psi or 25.4 kg/cm2 . With Double Bottle Connection having MECV coupling to join the two manifolds tested at 360 psi. Flat nitrile rubber- 80 no (approx.) etc complete as directed and approved by Engg-in-charge.
6	SITC of Flexible Cylinder Pigtail suitably connected to manifold made out of braided LPG hose Suraksha house suitably designed for commercial usage with working pressure of 20 Kg/cm2 fitted with LPG -10 nos, Non Return Valve made out of Forged Brass, fitted between the cylinder pigtail and manifold, does not allow the L.P.G. to flow back from manifold to burst pigtail- 10nos & Compact Valve Cylinder Adapter for making connection to cylinders, with MECV thread to withdraw unreduced pressure Size-25.6xMECV- 10 nos etc complete as directed and approved by Engg-in-charge.	2	Set	-	-
7	SITC of High Pressure Regulator: with inlet pressure range- 1 to 17 Kg/cm2 , outlet pressure range- 0.5-10 Kg/cm2 , and gas flow rate- 100Nm3 /hr. Filter: used separate impurities of LPG with Working pressure-20 Kg/cm2 , gas flow rate- 200Nm3 /hr. Inlet and Outlet size: 1” BSP etc complete as directed and approved by Engg-in-charge.	1	Each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1.1

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

2.31

Cum

2Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

2.1

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

834.61

3Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :

3.1

Two or more coats on new work

39.44

Sqm

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

23.01

Sqm

5SITC of 1 inch dia LPG Cylinder Manifold for 10 X 2 = 20. Cylinders of 19 Kg Capacity with 10 working and 10 stand by cylinder header each separated by 25 mm dia ball valve of class 200. The header made out of CS Seamless Sch- 40 Pipes of 25mm NB including all MECVs, Socket fittings, 25mm clamps set, painting etc, with isolation valve on both the header. Isolation valve for complete isolation of manifold. Manifold tested at 360 psi or 25.4 kg/cm2 . With Double Bottle Connection having MECV coupling to join the two manifolds tested at 360 psi. Flat nitrile rubber- 80 no (approx.) etc complete as directed and approved by Engg-in-charge.

SITC of Flexible Cylinder Pigtail suitably connected to manifold made out of braided LPG hose Suraksha house suitably designed for commercial usage with working pressure of 20 Kg/cm2 fitted with LPG -10 nos, Non Return Valve made out of Forged Brass, fitted between the cylinder pigtail and manifold, does not allow the L.P.G. to flow back from manifold to burst pigtail- 10nos & Compact Valve Cylinder Adapter for making connection to cylinders, with MECV thread to withdraw unreduced pressure Size-25.6xMECV- 10 nos etc complete as directed and approved by Engg-in-charge.

Set

SITC of High Pressure Regulator: with inlet pressure range- 1 to 17 Kg/cm2 , outlet pressure range- 0.5-10 Kg/cm2 , and gas flow rate- 100Nm3 /hr. Filter: used separate impurities of LPG with Working pressure-20 Kg/cm2 , gas flow rate- 200Nm3 /hr. Inlet and Outlet size: 1” BSP etc complete as directed and approved by Engg-in-charge.

Each