REPAIRS TO RCC PARAPET WALL, RAIN WATER PIPE LINE AND CHAJJA SPOUTS AT SUNJUWAN UNDER GE JAMMU

Amount

Material and labour for preparation of plastered or unplastered surfaces of wall including cornies, pillasters by brooming down or steel wire smoke, roof moulds moss and efforescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but applying one coat of white wash on ceiling complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but applying one coat of oil bound distemper complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but applying one coat of cement based paint complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.

Material and labour for preparing of old painted surfaces of wood of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster of any description on bricks or stone walls or from concrete surfaces including racking out joints, hacking for key, scrubbing complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) using waterproofing compound @ 3% by weight of cement on fair faces of brick walls or concrete surfaces and finishing surface even and fair complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid separately under respective item.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing plastered new surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for applying two coats of cement based paint including preparation of new plastered surfaces over one coat of primer complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper, white or tinted shade over coat of chalk whiting complete all as specified and as directed.

Material and labour for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

Material and labour for preparation of new plastered surface of external walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of wheather proof paint exterior grade over one coat of primer after making surface even and smooth including any colour for chajjas and fascias, including all scaffolding arrangement upto three storeyed building complete all as specified and as directed.

Material and labour for preparation of old plastered surface of external walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of wheather proof paint exterior grade over one coat of primer after making surface even and smooth, including any colour for chajjas and fascias, including all scaffolding arrangement up to three storeyed building complete all as specified and as directed.

Material and labour for complete removal of vegetations, roots and shrubs from wall and making good the wall with cement, brick work and plastering including all scaffolding up to 4 storey building complete all as specified and as directed.

Supply and fixing 18mm thick single layered HDHMR coloured / textured finish board density more than 850 kg / cum smooth finished fixed in cubords and jointed together with necessary adhesive complete all as per directions by Engineer-in-charge all as per manufacturer's specification complete all as specified and as directed. Make: - As approved by GE.

Supply and fixing in repairs 6mm thick one side prelaminated decorative PVC sheet and other side plain in cubords and like items inclusive of solvent cement and fixing at site complete all as per directions by Engineer-in-charge all as per manufacturer's specification complete all as specified and as directed. Notes for Ser item No's 19.00 and 20.00: - The scope of work including for taking down existing damaged particle boards / panels / doors and the unit rate quoted shall be deemed to be included for the same.

Supply and fixing in repair modular auto concealed soft closed hinges 35mm 110 degree size complete all as specified and as directed.

Supply and fixing in repair stainless steel handle 200 mm complete all as specified and as directed.

Supply and fixing in repair stainless steel handle 150 mm complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and as directed.

Material and labour for partition wall (Panels of 1.44 sqm (approx) made out of aluminium anodized standard hollow sections 63.50 X 38.10 X 1.95mm thick snap fit beadings, standard rubber gasket, 5.5mm thick sheet glass and 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing light grey lamination complete all as specified and as directed. Note:- The scope of work includes for taking down existing damaged aluminium door/window/grill/panels and the unit rate quoted shall be deemed to included for the same.

Demolition of brick or stone / boulders masonary, built in cement mortar including all quoins, arches, pillars etc, excluding ashlar facing dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) but except bricks i.e. using serviceable bricks obtained from Ser item No. 28.00 here-in-before complete all as specified and as directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.

Material and labour for complete removal of the existing roof treatment any no's of layers taken out membrane, PCC Padding/roof, tiles etc including grabbing up of tree roots, roughening and preparation of surfaces of old concrete floor by picking, scrubbing down with steel brushes, sweeping, cleaning and washing down with water to remove dust etc. and applying the following roof treatment complete all as specified and as directed. (a) Applying 1st course of 15 mm thick screed bed with cement mortar (1:4) over old concrete surface. (b) Applying 2nd course of bituminous primer @ 0.4 kg/Square Metre conforming to IS-3384 over screed bed. (c) Applying 3rd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 centigrade and applied @ 1.2 kg/Square Metre. (d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric 3mm thick, weight not less than 3.6 kg/Square Metre with 160 Grams/Square Metre non woven polyester made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane shall be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180 centigrade and applied @ 1.2 kg/Square Metre. (f) Applying two coats of bituminous based aluminium paint as finishing coat.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and as directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and as directed.

Supply and fixing steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20mm complete all as specified and as directed.

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and as directed.

Dismantling of plain or corrrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed.

Supply and fixing prepainted galvalume aluminium zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddding to wall, fix with self tapping screws with necessary washers/welding complete all as specified and as directed. (The profile of the sheet as specified and directed by Engineer-in-Charge).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for vitrified light shade ceramic tiles 10mm thick (Square / rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for vitrified light shade ceramic tiles 10mm thick (Square / rectangular) polished area of each tile not exceeding 0.36 Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar (1:4) complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.38 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar (1:3) complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 450mm x 300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks three layers of 500 litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I including 20mm thick Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 20mm-210 grams) including dismantling of old broken water tanks and refixing of inlet, outlet and over flow pipe etc complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks three layers of 1000 litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I including 20mm thick Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 20mm-210 grams) including dismantling of old broken water tanks and refixing of inlet, outlet and over flow pipe etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

Material and labour for structural steel work as in roof truss (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or flat sections) including distance pieces, cleats etc confirming to Fe - 290 Grade-E-165 complete all as specified and as directed.

Supply and fixing framed work such as grill, grating etc with end of bars shouldered and or riveted, or forged spikes, framed guard bars conforming to Fe 290 Grade E-165 complete all as specified and as directed.

Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing PVC (SWR) bends 110 mm radius complete all as specified and as directed.

Supply and fixing 110 mm PVC (SWR) junction single(T) equal / unequal complete all as specified and as directed.

Supply and fixing PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.

M/S VED PAUL MAHAJAN (BID ID -3168495)

M/S TRIKUTA BUILDERS (BID ID -3168314)

M/S Sukhmani Construction Co. (BID ID -3166907)