Nursery work under CAMPA in Co. 3/N

Amount

Earth work in bulk excavation by manual means over areas (Excluding 30 cm in depth 1.5 mt in width as well as 10sqm on plan) including disposal of excavated earth lead up to 50 mtrs and lift up to 1.50 mtrs as directed by the Engineer in charge in all kind of soils 50 % ordinary rock 50%..

Earth work in excavation by mechinical means hydraulic excavator over area s (excluding 30 cm in depth 1.5 mt in width as well as 10sqm on plan) including disposal of excavated earth lead up to 50 mtrs and lift up to 1.50 mtrs as directed by the Engineer in charge in all kinds sof soil.

Earth work excavation by menual means in trenches for foundation , drains, pipe cable etc (Excluding 30 cm in depth 1.5 mt in width as well as 10sqm on plan) including disposal of excavated earth lead up to 50 mtrs and lift up to 1.50 mtrs as directed by the Engineer in charge in all kinds sof soil in all kind of soils.

Earth work in bulk excavation by menual means over areas (Excluding 30 cm in depth 1.5 mt in width as well as 10sqm on plan) including disposal of excavated earth lead up to 50 mtrs and lift up to 1.50 mtrs as directed by the Engineer in charge in all kinds sof soil in all kind of soils.

Providing and laying in position cement concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 crushed stone aggregate 40 mm nominal size excluding the cost of centering and shuttering all work up to plinth level including carriage of material from source up to side of work complete.

Reinforced cement concrete 1:1.5:3 mix (1 cement 1.5 coarse sand 3 crushed graded stone aggregate 20 mm nominal size) in beams, columns, pillars suspended floors, roofs having slope up to 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, stair cases and spiral stair cases up to floor 5 levels excluding cost of centering , shuttering, finishing and reinforcement including carriage of material from source up to side of work complete.

Reinforcement for R.C.C work including straightening, cutting bending, placing in position and binding all complete Thermo-Mechanically Treated bars including carriage complete .

Reinforced cement concrete 1:1.5:3 mix (1 cement 1.5 coarse sand 3 crushed graded stone aggregate 20 mm nominal size) including attached pilaster, buttresses, plinth and string courses, fillets collumns, pillaars, piers, abutments, piers etc excluding cost of centering , shuttering, finishing and reinforcement including carriage of material from source up to side of work complete.

Dumping of stone horizontally

Providing and laying in position cement concrete 1:3:6 mix (1 cement: 3 coarse sand : 6 crushed stone aggregate 20 mm nominal size excluding the cost of centering and shuttering all work up to plinth level including carriage of material from source up to side of work complete.

Random Rubble stone masonry with hard stone in foundation and plinth with bond stone.

Random Rubble stone masonry in 1 : 6 mix using nallah stone including carriage complete.

Providing and laying in position cement concrete 1:2:4 mix (1 cement : 2coarse sand : 4graded stone aggregate 20 mm nominal size )of specified grade including curing but excluding the cost of centering and shutering all work up to plinth level including carriage of material from source up to side of work complete.

15 mm cement plaster finished with a floating coat of neat cement in mix 1:6 mix ( 1 cement : 6 coarse sand) including carriage of material from source up to side of work complete.

Providing and laying non-pressure NP2 class (Light duty) 1000 mm dia RCC pipes with collars joints with stiff mixture of c ement mortar in the proportion of 1:2 ( 1cement: 2 fine sand) including testing of joints etc complete .

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) including carriage of material from source up to side of work complete.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level including carriage of material from source up to side of work complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): using 2nd class deodar wood)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately).using 2nd class deodar wood) (Wood available)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer in charge .

Fixing of 12 mm thick tongue and groove ceiling (wood available)

Providing corrugated G. S. sheet roofing (0.80 mm thick with zinc coating not less than 275 gram/m2) including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing 0.80 mm thick with zinc coating not less than 275 gram/m2 ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.

Providing and fixing of angle iron posts structural steel work in single section, fixed with or without connecting plates, including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage complete .

Fixing of wooden pole in concrete section .45 x.45 x .45 concrete block material available at site.

Providing and fixing of G. I chain link fencing of required width in mesh size 50 x 50 mm including strengthing with 2 mm dia wire16.25.2 masde of GI wire of dia 4mm PVC coated including carriage complete.

Fencing with angle iron posts/wooden posts placed at required distance ambeded in cement concrete blocks with horizontal lines and in digonal intervain with horizontal wires of barbed wire weighing 9.38 kg per 100 mtrs minimum between the two posts.

Form work of ordinary timber plankes so as to give on rough finished surface

Centering and shuttering including form work of ordinary timber plankes in foundation, footing etc

Centering and shuttering including form work of ordinary timber plankes in lintel beams, plinth beams , bressumers and cantilevers.

Centering and shuttering including form work of ordinary timber plankes in columns pillars,, piers etc .

Providing and fixing of GI pipes complete with GI fitting excluding trenching and refilling etc (external work) 80 mm dia

Providing and fixing of GI pipes complete with GI fitting excluding trenching and refilling etc (external work) 20 mm dia

Filling of excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20 cm in depth , consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m

Earth work in surface excavation in not exceeding 30 cm in depth but exceeding 1.50 m in width as well as 10 sqm plan including disposal of excavated earth lead up to 50 m

IMTIYAZ AHMAD BHAT

Alpine Traders and Engineers

Kashmir Singh

Mohd Ayaz

Ashok Kumar Contractor

M/S ZARGAR CONSTRUCTION CO