SPL REPAIR TO CAFETERIA SHED AT NARIYAL BAGEECHA, BRICHGUNJ MIL STN, SRI VIJAYA PURAM

Taking down chowkats or frame with shutters area n.exc 1.5 Sqm each (without taking off shutters from the frames) including cutting holes to facilitate the taking down etc complete all as directed.

S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 60x58 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions.

Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle (02 Nos), tower bolts (02 Nos), sliding bolt (01 No), Hinges (03 Nos) made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

S&F5mm thick figured glass, pinhead type, in squares n.exc 0.5 sqm each pane complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F in repairs 10mm thick toughned glass (Glass will be embossed as approved by GE where reqd) as in hinged doors, partitions, automatic doors and similar wk including cutting to shape, drilling holes reqd etc complete all as specified and directed.

Dismantling of wall and ceiling boards including frame (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed.

S&F Gl frame work of grid size 605x605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and including hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc complete all as specified

S&F 10mm PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing etc complete all as specified and as directed.

S&F 4mm thick WPC fluted exterior & interior louvers with and including aluminium section 25mmx25mmx1.2mm, aluminium angle cleat & screw locking etc. The WPC fluted panels are interlockable and louvers should be of size 2900mmx150mm x25mm. The cost includes aluminium framework and all necessary fixtures & fittings etc complete all as specifed and as directed by Engr-in-Charge.