Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹21,570
Closing Date
16 Nov 2023, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
pADMASHREE K T
TENDER FOR PROVIDING NEW 2 ADDITIONAL 11KV PCVCB SWITCHGEARS FOR 66/11KV SUB-STATION, MADADAKERE IN 220KV RS & SS DIVISION,CHITRADURGA
KPTCL/2023-24/EL/WORK_INDENT202
KPTCL/2023-24/EL/WORK_INDENT202
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL SEE Transmission Works Circle Davanagere
4 documents required · 0 mandatory · 4 optional
Contractor should have carried out similar type of work/ Augmentation of Power Transformers/providing of additional Transformers / breakers (66 KV & 11 KV) on TK or PTK or labour contract basis in KPTCL/ESCOMS in last Five years. The Contractor shall submit the experience certificate issued by the officer not below the rank of Executive Engineers
The tenderer shall possess a valid Super Grade Electrical Contractor License issued by Govt. of Karnataka
The contractor should have achieved annual financial turnover not less than Two times the amount put to tender (Rs. 17,25,418/-) in any of the last Five years.
For executing the above work the contractor should have the necessary men with tools & tackles
As the above contract is Partial Turnkey, supply of materials should be as per the existing norms applicable to turnkey works. Material shall be procured from the approved KPTCL Vendors only
Self Declaration for Black list / litigation
EPF Registration Certificate
ESI Registration Certificate
GSTRegistration Certificate
labour licence
₹500
₹21,570
25 Oct 2023
25 Oct 2023
18 Nov 2023
2 Nov 2023
Material Portion
Supply of LED flood lamp fittings
Supply of MCB 32A 10KA for 150Watt LED flood lamp fittings
Supply of 3Cx2.5sq mm PVC sheathed armoured cable for 150 Watt LED flood lamp fittings
11kV Isolator Double break, 400 A,
11kV 400 A, Special roaster GOS
19core x 2.5 Sq.mm
4 core x 6.0 Sq.mm
2 core x 6.0 Sq.mm
Bolted type tension clamp for Single Coyote ACSR 70/90KN,16mm
T-Clamps suitable for Single Coyote to Single Drake ACSR Conductor
T-Clamps suitable for Single Coyote to Single coyote ACSR Conductor
Pad Clamps for Coyote
PG Clamps for Coyote
CT clamps for single coyote ACSR conductor
D shackles (16mm)
GI Eye bolts of size 5/8''x8'' length
GI bolts and nuts of different sizes
90KN Disc Insulators
C100x50 4 mtrs long GI C channels (0.036MT +0.0018 MT bolt nuts/4mtr long piece)
Assorted angles different sizes
RCC Pole of 9.5m long WL 300kg
RCC Pole GI clamps
Errection Portion
Breaker Erection,alignment and fixing to the foundation,outdoor 11kV switchgear panel/unit including movement from the point of unloading to the point of erection 11kV Outdoor Switchgear
Wiring and Assisting in testing and commissioning 11kV Outdoor Switchgear
Wiring and Assisting in testing and commissioning for item 22 23 and 24 means contractors should provide labourers for wiring and commissining by RT/MT/firm Engineers. For additional 11KV panel indoo...
Laying of control cables
Erection of 11KV Isolator Double break 400 A 25KA
Erection of special Roaster GOS 400A Single break
BUSBAR FORMATION Main bus/ cross bus all three phases in segment of using Coyote single/Double conductor with f...
Erection of RCC Poles
Erection of C100x50 4 mtrs long GI C channels
(0.036MT/Beam)x18Numbers =0.648 MT+(0.0018x4=0.0072)=0.6552 MT
Supply and Grounding of GOS with 50X6mm GI flats and conneccting equipment to the earthmat, flats and ground pit. Each point of earthmat with all forms of works like bending,twisting ,drilling of ho...
Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weld...
Earthwork excavation by manual means for foundation of buildings, culverts, water supply and sanitary lines and electrical conduits etc., either in pits or trenches 1.5m in depth including dressing ...
Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement at 180kgs with 40mm and down size graded granite metal coarse aggregates at 0.85 cum and fine aggregtes at 0.57 cum...
Providing and laying in posiotion reinforced cement concrete of design mix M20 with OPC cement at 320 kgs with 20mm and down size graded granite metal coarse aggregates at 0.69 cum and fine aggregt...
Providing TMT Steel reinforcement for RCC work including straigtening,cutting bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to ...
Providing and removing centering, shuttering, strutting, propping etc and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour com...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2 gtc-general terms & conditions.doc
Tender Submission Guidelines • 0.58 MB
NIT-Madadakere Call-2.DOC
Instructions to Tenderers • 0.16 MB
3 annexures.xls
Technical Information / Worksheet • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .