PERIODICAL SERVICES IN MD ACCN OTM ACCN ZONE -III UNDER AGE B/R-II OF GE (NORTH) MEERUT

Amount

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement with using water proofing compound @ 3% complete all as specified and directed. Note:- 1. Contractor is required to deposit ready mix bags for 100% CA quantity to Engr-in-Charge with in 15 days of acceptance of contract. 2. Cost of scafolding if required for rendering is included in this item

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified.

M&L for rendering 10 mm thick in cement mortar 1:3, as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required up to 3.50 Mtr height building.

M&L for rendering 10 mm thick in cement mortar 1:3, as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required exceeding 3.5 Mtr but n.exc 7.00 Mtr height building.

M&L for repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC (1:2:4) Type B-0 and finished with cement mortar 1:3 after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish including formwork complete all as specified and directed. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : (Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account).

Supply only TMT steel bars for reinforcement in required length and dia, complete all as specified and directed.

Supply only welded steel wire fabric, weight not exc 4kg/sqm, complete all as specified and directed.

M & L for cutting of bushes small trees ( Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas, wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labour in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 (12.5 mm graded stone aggregate) / Brick work in CM 1:4 as required at site and complete all as specified and as directed.

M&L for complete removal of existing treatment of wall by mechanical means of surfaces & levelling/ edging the disturbed places/ edges using necessary filling compound of Birla/ JK wall care putty to obtain smooth regular/ even finish using sand paper complete all as specified and directed. Note :- Work will be strictly executed by mechanical means / tools as required for smart periodical services and the cost of all T&P required to execute this item is bear by contractor and included in this item

M&L for applying two coats of oil bound distemper on prepared surfaces of wall by using roller complete all as specified and directed

M&L for applying 2mm thick JK / Birla wall care putty for making smooth surface complete all as specified and directed

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornics etc and applying one coat of white wash complete all as specified and directed

All as per Srl item No 14 here-in-before but subsequent coat

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete walls in patches n.exc 2.00 sqm each patch finished fair and smooth without using extra cement to matches with the existing surfaces including preparation of new plastered surfaces of wall and applying two coats of white wash including taking down old plaster complete all as specified and directed

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying two coats of cement base paint, complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint, complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L preparing of old plastered surface of wall incl repairs with wall care putty wherever required and apply one coat of exterior emulsion paint complete all as specified and directed

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornics etc and repair with wall care putty applying one coat of oil bound distemper, complete all as specified and directed

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for carrying out petty repair with wall care putty wherever required (area n exc 1 sqm) and applying a coat of primer and than applying two coat of exterior emlusion paint all as spd and directed. Note: height of building can be more than 10 meters with no stair to reach at the top and all work will be carried out by authorised applicator only by use of rollers and brushes.

S&F in repairs chromium plated brass jet spray suitable for EWC including PVC chord and brass nozzle and fixed to pipe complete all as specified and directed.

S&F in repair pair of brass adjustable legs for WHB mixer inc washers and packing as per site requirement complete all as specified and directed

S&F in repair pair of brass adjustable legs for wall mixer inc washers and packing as per site requirement complete all as specified and directed

S&F in repairs packing rubber washer of wall and WHB mixer complete all as specified and directed

S&F in repair kitchen tap as per sample kept in B/R-II office 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe complete all as specified and directed.

S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed

S & F in repairs stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.

S&F in repairs 15mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge.

S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge.

S&F in repairs PVC connections fibre reinforced 15mm size with PTMT nuts of length 300mm suitable for hot water complete all as specified and directed

S&F in repairs PVC connections fibre reinforced 15mm size with PTMT nuts of length 300mm complete all as specified and directed

Supplied and fixed in repairs CP waste coupling of size 40mm for sink complete all as specified & directed.

Supplied and fixed in repairs CP waste coupling of size 32mm for WHB complete all as specified & directed.

S&F in repairs 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F in repairs 40mm dia PVC waste pipe for Sink 60cm long with union complete all as specified and directed.

M&L in repairs spindles for 20mm CP brass bib cock / stop cocks / pillar tap / angle wall mixer etc half or full turn of any description suitable for MAP Qtrs complete all as specified and directed.

S&F in repair CP toilet paper holder complete Make : Pearl / Prayag complete all as specified and directed

S&F in repair 15mm dia, 50mm long GI nipple, suitable for HDPE water tanks complete all as specified and directed

S&F in repair 20mm dia, 50mm long GI nipple, suitable for HDPE water tanks complete all as specified and directed

S&F in repair for 10/12/14 inch long stainless steel sliding channel for drawar complete all as specified and directed

S&F in repairs 40mm dia,brass polished, bright finished cupboard knobs fixed with nut, screw and washer complete all as specified and directed

S&F in repairs grating 100 mm dia of PTMT fixed on floor/ nahani trap with cement mortar, fixed in repairs, complete all as specified and directed.

S&F in repairs MS CP grating 125 mm dia over floor / Nahni traps complete all as specified and directed.

S & F in repairs 15mm ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe (Minimum weight 142 gms) complete all as specified and directed.

S & F in repairs 20mm ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe or brass ferrule of 15 mm bore and fixed (Minimum weight 90 gms complete all as specified and directed.

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed. (Minimum weight 15mm- 90gms/20mm-92gms) complete all as specified and directed.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

S&F Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), fixed in repairs, including connection to water pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed by Engineer - in -Charge.

S&F plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.

S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed Make - Jaquar, Parko, Gem or equivalent

S&F in repair chromium plated brass shower rose 125 mm sizewith or witout swivel joints including fxing with 15 mm bore pipe, complete all as specified.

S&F towel rail 600 mm long, 20 mm dia, ‘D’ type, brass, chromium plated, fixed to walls with screws and plastic cleats, fixed in repairs, complete all as specified.

S&F towel ring 20 mm dia, round brass, chromium plated, fixed to walls with screws and plastic cleats, fixed in repairs, complete all as specified.

S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.

S&F in repair CP Brass Soap Dish complete all as specified and directed.

S&F in repairs Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and directed.

S & F in repairs waste coupling of PTMT of size 32 mm complete all as specified and directed.

M&L for PVC heavy duty waste pipes of 40/32 mm dia suitable for wash basin/ sinks complete all as specified and directed.

Dismantling of PVC water storage tanks of capacity exceeding 250 litres but not exceeding 500 litres, including removal of rubbish outside MoD land, complete all as specified.

Dismantling of PVC water storage tanks of capacity exceeding 500 litres but not exceeding 1000 litres, including removal of rubbish outside MoD land, complete all as specified.

S & F Rotational moulded polythelene, double layered, water storage tanks of capacity 500 litres (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified.

S & F Rotational moulded polythelene, double layered, water storage tanks of capacity 1000 litres (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified.

M&L fixed in repairs for 2 mm thick MS plain sheet for making modified lid of water tank and fixed with 04 nuts and bolts for water tanks for water capacity n.exc 750 ltr complete all as specified and directed

Taking up or down steel tubing and connections 15mm dia pipes including removal complete all as specified and as directed.

Taking up or down steel tubing and connections 20mm dia pipes including removal complete all as specified and as directed.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

Refixing old steel tubing and connections 15mm dia in new or old position including cleaning of old pipe (walls, ceiling, floors etc) complete all as specified and directed.

Refixing old steel tubing and connections 20mm dia in new or old position including cleaning of old pipe (walls, ceiling, floors etc) complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down complete all as specified.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down complete all as specified.

S & F 110mm bore PVC (SWR) bends any radius complete all as specified.

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified.

S&F in repairs UPVC (SWR) floor trap 75 mm bore including jointing to waste pipe with cement solvent fixed in cement concrete complete all as specified and directed

S&F in repairs PVC (SWR) gully trap 125/100 mm bore setting and jointing with solvent cement complete all as specified and directed

Taking down PVC pipes any size or pattern including all fittings complete all as specified and directed

S&F 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint laid in trenches/under floor complete all as specified and directed.

S&F 110mm bore dia UPVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F PVC Bath cabinet with mirror of size 18" X 22" X 4.25 " complete all as specified and directed.

S&F sheet glass shelf assembly consisting of not less than 5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repair in fancy type brass CP hot and cold centre hole wash hand basin mixture swan neck, 15 mm bore screwed down high pressure with long screwed shanks and fly nuts screwed to iron pipe complete all as specifieed and directed. MAKE :- Pearl Cat part No ARI-013, PRAYAG-LAGUNA -9350 or equivalent make in PS

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified

S&F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of 5 mm thick plain colour PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified.

S&F Factory made moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm prelam PVC sheet on back face, complete all as per manufacturer instructions complete all as specified.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100 mm, ISI marked, complete all as specified.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed.

S&F 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F block board 18/19 mm thick, grade 2 quality, interior grade, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S & F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, 30 mm wide flap (when open), fixed in repairs, complete all as specified.

S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified.

S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. Note:- New wooden required for glazing glass in wooden window will be paid for separately.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.

S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty or rubber beading or by any other means as per requirement in square not exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair 25 mm dia stainless steel curtain rod with fancy type bracket and ring ( 08 Nos/ RM) complete all as specified and as directed.

M&L for welding in repair of loose joints of trusses, purlins, rafters, cleats, sliding doors, flat iron supports for valley gutters, windows, doors, northlight framing etc inc at any height & inc necessary cutting and grinding complete all as specified and directed

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F Mild steel door spring 300 mm, ordinary rat tail rod pattern spring including roller and roller plate, fixed in repairs, complete all as specified.

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023 or equivalent make in PS

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-740022 or equivalent make in PS

A V ENTERPRISES

Tridev Construction Company

M/S KAPIL ENTERPRISES

AEGIS INTERNATIONAL

SA construction co.