Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹36.0 L+₹10,830 (0.30%)Rejected-Finance | L2 | Rejected-Finance RATE HIGH | |
| 3 | L3₹36.6 L+₹69,960 (1.95%)Rejected-Finance | L3 | Rejected-Finance RATE HIGH | |
| 4 | L4₹41.0 L+₹5.1 L (14.2%)Rejected-Finance FLAT NO 1 179 GANESH NAGAR S NO 10 YERAWADA PUNE 411006 | PUNE | MAHARASHTRA | 411006 | L4 | Rejected-Finance RATE HIGH |
Tender Value
₹45.0 L
EMD Value
₹89,980
Closing Date
5 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Pune
NO 1 GEN BHAGAT MARG PUNE 411040
8468 CERTAIN PETTY REPAIRS AND DAY TO DAY B R COMPLAINTS OF WARDS AND ANCILLARIES UNDER AGE B R III OF GE (S) PUNE
2023_MES_612394_1
8468 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
330 days
GE South Pune
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹89,980
13 Oct 2023
5 Aug 2023
7 Sept 2023
5 Aug 2023
5 Sept 2023
22 Aug 2023
Amount
S&F in repair PVC low level flushing cistern 10 ltrs capacity approved make including all internal fitting, one pair of bracket, including making connections to inlet / outlet PVC connections etc complete all as specified and directed.
S & F in repairs Plastic water closet seat of any colour, closed pattern with flat bottom & cover and mild steel chromium plated hinging device, complete all as specified and directed.
S&F vitreous china urinals white half stall type ( excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60 mm long brass screws pointing around urinal back in cement complete all as specified and as directed.
S & F in repairs Urinal spreader of Brass any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.
S&F 16mm thick toughened glass frosted as in hinged doors, partitions & automatic doors and similar work including cutting to shape, drilling holes of required size as in glazing structural, complete all as specified and directed.
S & F PVC connection 30 cm long 15 mm bore with 2 Nos brass check nuts fixed in repairs, complete all as specified and directed.
S & F PVC connection 45 cm long 15 mm bore with 2 Nos brass check nuts fixed in repairs, complete all as specified and directed.
S & F PVC connection 60 cm long 15 mm bore with 2 Nos brass check nuts fixed in repairs, complete all as specified and directed.
S&F in repairs high density polythene pipe 50mm dia (HDPE) of pressure rating 6kgf/cm² fixed complete to wall or floor incl bend, tee, elbow etc. complete all as specified and directed.
S & F in repair 15 mm bore bib taps, fancy type, cast copper alloy, chromium plated with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15 mm bore pillar taps, fancy type, Cast Copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.
S&F in repair brass chromium plated shower rose with or without swivel joints, any size including fixing to a steel pipe or union of size 125mm size complete all as specified and directed.
Supply and fixing in repair auto closing system pillar tap, chromium plated, cast copper alloy screwed for 15mm bore GI pipe or for brass ferrule complete all as specified and directed.
Supply and fixing elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever of cat ID-FLR-5031N of jagur or equivalent complete all as specified and directed.
S & F in repair angle cock, fancy type, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges, fixed with screws and wooden/plastic cleats etc. complete all as specified and as directed.
S & F in repairs towel ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as directed.
S&F Ball brass valves 20mm bore dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of complete all as specified and directed by Engineer-in-Charge.
S&F Ball brass valves 25mm bore dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of complete all as specified and directed by Engineer-in-Charge.
S&F in repairs vitreous china wash down water closet pan, 'Pedestal pattern' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.
M&L in repair Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles
M&L for 75mm dia, cast iron floor trap with stainless steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4 including making connections and taking down of old unserviceable nahani trap, complete all as specified and directed.
S&F in repair cast iron floor/Nahani trap with grating 100mm dia, fixed to cement concrete type B1 1:2:4 including jointing to waste pipe in run lead including removing old traps, complete all as specified and directed.
S&F in repairs stainless steel sink with drainage board 1 mm thick for kitchen, with plug, waste pipe, washers incl cantilever CI Brackets, connecting union etc & connecting to inlet/outlet for smooth functioning size of sink 915 x 460 mm overall and bowl size 410mmx330mmx160mm, complete all as specified and directed.
S&F in repair stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; incl bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size, of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as specified and directed.
S&F in repair CP sink mixer with swinging casted spout (wall mounted model) with connecting legs and wall flanges for 15mm bore of pipe conforming to CAT No. SOL-6309 of "Jaquar" or of Equivalent make specified here in after, complete all as specified and directed.
S & F in repair waste coupling, SS, suitablr for sink / basin of 40mm bore, complete all as specified and directed.
Demolition stone slab/tiles of any description or thickness, laid, bedded & pointed in cement mortor in floors, hard standing, Apron etc, complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete, complete all as specified and directed.
M&L for PCC 1:2:4 type B-0, 25mm average thickness, levelling course as in padding concrete, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M & L for 300x300mmx6 to 7mm thick, non skid ceramic coloured tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete laid over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed
M&L for matt finished coloured ceramic tiles 7 to 8mm thick joint free, 400x400mm size of approved colour, set jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in CM 1:4 as in flooring, complete all as specified and directed.
M&L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed.
M&L for 200x300mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado / skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed.
M&L for vitrified tiles dark shade, double charged as in floors, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for vitrified tiles dark shade, double charged as in vertical surface area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster in CM 1:3 including triangular filleting on top in CM 1:4, complete all as specified and directed.
M&L for vitrified tiles, dark shade, double charged, as in floors, area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L for vitrified tiles dark shade, double charged as in vertical surface area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster in CM 1:3, including triangular filleting on top in CM 1:4, complete all as specified and as directed.
M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps ,pillar, window cill, shelf, cooking platform and like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L for granite 20mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick set in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 10mm thick screed bed in CM 1:4 including filleting, complete all as specified and as directed.
Rounding to edges of stone slabs and polishing in edges, such as in steps, shelf, cooking platform and other similar situations complete all as specifed and directed.
M&L for 20-25mm thick machine cut cudappah stone slabs, fixed independently as in shelves for cooking platform and the like etc, set & jointed ends in CM 1:3, complete all as specified and as directed.
M&L for providing and fixing stainless steel (Grade SS-304) railing, corner guards made of stainless angles, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts/screws etc., of required size, on junctions of Wall etc, with suitable arrangement complete all as specified & as directed.
M&L for 22 to 25mm thick mirror polished kota stone of size 600x600mm set and jointed with neat grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry as in floor laid over and including 20mm thick screed bed in CM (1:6). complete all as specified and directed.
Demolition and breaking of drain pipes AC /CI/PVC set in cement mortar or adhensive of 75mm to 110 mm dia, complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches, complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches, complete all as specified and directed.
S&F PVC (SWR) pipes 160mm bore 0.4 Mpa (4.0Kg/cmSq), single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches, complete all as specified and directed.
S&F PVC (SWR) bends any radius 110 mm bore, complete all as specified and directed.
S&F PVC (SWR) bends any radius 75 mm bore, complete all as specified and directed.
S&F PVC (SWR) vent cowl 100 mm bore, complete all as specified and directed.
S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 110 mm bore, complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan, semi-pedestal pattern (Anglo-Indian Type), including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.
S&F Counter top basin of Size 610x415x160mm complete all as specified & directed. Make : Jaquar Product code DRS-WHT-37601 or equivalent model in Kohler or others as approved.
S&F Bottle trap (with internal Partition) 32mm size with 250mm & 190mm Long wall connection pipes and wall flange complete all as specified & directed. Make : Jaquar Product code ALM-WHM-769L250x190 or equivalent model in Kohler or others as approved
S&F in repairs basin mixer for hot and cold water without popup waste with 450mm long Braided Hoses complete all as specified and directed. (Make : Jaquar Product code ARI-CHR-39001B or equivalent model in Kohler or others as approved.
S&F in repairs Single piece-WC with PP Seat cover, hinges, Fixing Accessories, Accessories set and cistern fittings complete all as specified and as directed. (Make : Jaquar of cat no SLS-WHT-6851S110PP or equivalent model in Marc/ ESS-ESS as approved).
S&F in repair vitreous china wash hand basin white Oval shape Under counter Basin with Fixing Accessories, CAT ID-FLS-WHT-5701 Size: 560x430x195 mm of "Jaquar" or equivalent cat part of make mentioned here-in-after, complete all as specified and directed.
M&L for providing and fixing in repair CP hand wash basin mixer for 15mm bore of pipe conforming to CAT No. CQT-23167B of "Jaquar" or equivalent cat part of make mentioned here-in-after, complete all as specified and directed.
S&F in repairs CP Bottle trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange CAT No-ALD-769L300x190 of "Jaquar" or equivalent cat part of make mentioned here-in-after, complete all as specified and directed.
M&L for providing and fixing in repair CP wall mixer for 15mm bore of pipe conforming to CAT No. CQT-23273UPR of "Jaquar" or equivalent cat part of make mentioned here-in-after, complete all as specified and directed.
M&L for providing and fixing in repair Stainless steel toilet paper holder with flap recessed type SS Cat ID AHS-1533 of Jaquar or equivalent cat part of make mentioned here-in-after, complete all as specified and directed.
M&L for providing and fixing in repair CP Soap dish brass chromium plated. Cat ID AHS-1531 of "Jaquar" or equivalent cat part of make mentioned here-in-after, complete all as specified and directed.
M&L for providing and fixing in repair Brass CP, Jet Spray assembly, complete all as specified and directed.
S & F in repairs, Two way bib cock with wall flange brass CP toilet fittings conforming to CAT No. FUS-29041 of "Jaquar" or equivalent cat part of make mentioned here-in-after, complete all as specified and directed.
M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor and wall and injecting injection of CORESEAL 135A / CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. Note :- The rate is inclusive of replacement of any defective fittings / fixtures of any type / material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend. Makes for item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.
S&F in repair vitreous china wash hand basin white flat back size 550x400mm including brackets, CP waste coupling, 32 mm dia waste pipe, complete all as specified and directed.
S&F in repair vitrous china wash hand basin with pedestal snow white 630x480mm flat back inclduing and providing waste pipe 40mm dia medium grade, CP brass waste coupling 32mm dia with check nut washer etc fixed in repairs, complete all as specified and directed.
S & F in repairs PVC flexible waste pipe 40mm bore of suitable length, complete all as specified and directed.
S & F in repair grating stainless steel (Minimum wt 25 Gms) 75 to 100 mm dia, complete all as specified and directed.
Cutting holes into or through brick wall built in cement mortar, superficial area exc. 150 Sq. cm but n. exc. 400 Sq. cm and making good the dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 10cm girth but not exceeding 20 cm girth, complete all as specified and directed.
S&F for GI tubing 15mm dia medium grade with all fittings & fixtures, fixed to walls & ceiling or laid in floors in repairs including taking down of unserviceable GI pipe, complete all as specified and as directed
S&F for GI tubing 20mm dia medium grade with all fittings & fixtures, fixed to walls & ceiling or laid in floors in repairs including taking down of unserviceable GI pipe, complete all as specified and as directed
M & L for Cleaning and removing all dirt and scale etc from RCC tank 50000 Ltrs and from the mouths of circulating pipes for the tanks, complete all as specified and as directed.
S&F in repairs, PVC cover for water storage tank suitable for 500 / 1000 / 2000 / 5000 litres Capacity, fixed with PVC locking arrangements, complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in post, main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates, complete all as specified and as directed.
M&L for mild steel miscellaneous work as in framed work such as barred iron doors, gate etc including pin type hinges, hand made sliding bolt etc with and including hanging, complete all as specified and as directed.
M&L for preparating of new steel surfaces and applying two coats of synthetic enamel paint 1st quality over a coat of red oxide primer on steel surfaces exc.10cm width or girth, complete all as specified and as directed.
Supply and fix in replacement rotational moulded polyethylene water storage tanks 500 ltr capacity in replacement (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of washouts, vent pipe including all new tank nipples of suitable size, complete all as specified and as directed.
Supply and fix in replacement rotational moulded polyethylene water storage tanks 1000 ltr capacity in replacement (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of washouts, vent pipe including all new tank nipples of suitable size, complete all as specified and as directed.
S&F in repair 20mm bore GI nipple suitable including with rubber washer etc suitable for HDPE water tank, complete all as specified and as directed.
S&F in repair 25mm bore GI nipple suitable including with rubber washer etc suitable for HDPE water tank, complete all as specified and as directed.
S&F in repair Gun-metal globe or gate valves for 25mm dia pipe with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
S&F in repair Gun-metal globe or gate valves for 40mm dia pipe with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
M & L for Cleaning and removing all dirt and scale etc from rotational moulded polyethylene water storage tank not exc. 500 Ltrs and from the mouths of circulating pipes for the tanks, complete all as specified and as directed.
M & L for Cleaning and removing all dirt and scale etc from rotational moulded polyethylene water storage tank not exc. 1000 Ltrs and from the mouths of circulating pipes for the tanks, complete all as specified and as directed.
M & L for Cleaning and removing all dirt and scale etc from rotational moulded polyethylene water storage tank 5000 Ltrs and from the mouths of circulating pipes for the tanks, complete all as specified and as directed.
Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.
S&F of 5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified and as directed.
S&F of 6mm thick toughened glass of make Saint Gobain ST 720, for structural glazing for Main Hospital Building including necessary safety precaution, complete all as specified and as directed.
S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane, complete all as specified and as directed.
Taking down chowkats of frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm and n. exc. 4.00 sqm each including hold fasts and removing the same from site, complete all as specified and as directed.
Taking down chowkats of frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each including hold fasts and removing the same from site, complete all as specified and as directed.
Taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each, removing to store, complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) three track sliding window with two or more shutter with 5mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make as mentioned here-in-after, complete all as specified and as directed by Engr-in-Charge:- (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) ventilators / louvers using 4mm thick x 10cm wide frosted glass strips and by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make as mentioned here-in-after including with rubber beading etc, complete all as specified and as directed. (a) SP : 20048 (b) Glazing clips : 19352
S&F aluminium single leaf door on pivots including hydraulic door closer (Aluminium Extruded Section), door lock, handles 5mm thick plain glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and by using powder coated sections as given in 'JINDAL' or of equivalent make as mentioned here-in-after complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Shutter vertical - 18501 (c) Shutter top rail - 19503 (d) Shutter middle rail - 20060 (e) Shutter bottom rail - 19511 (f) Glazing clips - 19352.
S&F Aluminium doule leaf door on pivots including hydraulic door closer (Aluminium Extruded Section), door lock, handles 5mm thick plain glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using powder coated sections as given in 'JINDAL' or of equivalent make as mentioned here-in-after, complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Shutter vertical - 18501 (c) Shutter top rail - 19503 (d) Shutter middle rail - 20060 (e) Shutter bottom rail - 19511 (f) Glazing clips - 19352.
S&F in repairs aluminium partition with 12mm thick prelaminated particle board of choice colour in bottom panel and 5mm thick plain glass in top panel fixed with clips aluminium beads, rubber gaskets etc, centre to centre distance of vertical member shall n. exc 1mtr and horizontal member shall n. exc 1.10mtr by using following aluminium powder coated section as specified in "JINDAL" or of equivalent make as mentioned here-in-after, complete all as specified and as directed. (a) SP - 20048 (b) DP - 20047 (c) Glazing clips - 19352.
S&F aluminium powder coated sliding door shutter including door lock, handles, 5mm thick plain glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using powder coated sections as given in 'JINDAL' Catalogue and fixed on top hung incl roller etc complete all as directed by Engineer-in-Charge. (a) Rectanguler tube - 14005 (b) Vertical Rail - 19502 (c) Top rail - 19503 (d) Middle rail - 20060 (e) Bottom rail - 19501 (f) Glazing clips - 19352.
S&F of anodised aluminium Deco grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed by Engineer-in-charge.
S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.
S&F of 25mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber / aluminium frame work including 6mm thick, 1st class hard wood (Teak) beading all around fixed in repair, complete all as specified and as directed.
S&F in repair of 100mm long stainless steel butt hinges, medium weight and fixed, complete all as specified and as directed.
S&F in repair of powder coated 300mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed.
S&F in repair of powder coated 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and as directed.
S&F in repair of powder coated 150mm size aluminium handles, fabricated type, anodised and fixed, complete all as specified and as directed.
S&F in repairs of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.
S&F in repair of Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and as directed.
S&F in repair powder coated 200mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed.
S&F in repair powder coated 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.
S&F in repair powder coated 150mm size aluminium handles, fabricated type, anodised and fixed, complete all as specified and as directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.
S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F of 100mm long stainless steel butt hinges, medium weight and fixed, complete all as specified and as directed.
S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and as directed.
S&F in repairs of 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including 6mm thick, 1st class HW (Teak wood) beading all around, complete all as specified and as directed.
S&F of aluminium, anodised,extruded door handle 75mm long, complete all as specified and as directed.
S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.
S&F in repair of brass Locks 4 levers, cupboard, grade I, size 50mm, complete all as specified and as directed.
S&F in repair of 150mm Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and as directed.
S&F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised Width of flaps 30mm (when open), complete all as specified and as directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed.
S&F anodised aluminium snap grid frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and as directed.
M&L for 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately), complete all as specified and as directed.
M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately), complete all as specified and as directed.
M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and as directed.
Material & Labour for GI powder coated Grid False Ceiling with Metallic Ceiling tiles etc. complete including fittings & fixtures all as specified and as directed.
M&L for 3mm thick Aluminium Composite Panel (ACP) exterior grade (skin thickness 0.25mm) including aluminium anodised frame work of AA 300 / 5000 series with one core of material of virgin LDPE and coating of kynar 500 resin based PVDF coating (mettallic colour) with joint filling silicon weather proofing any colour, complete all as specified and as directed.
M&L in repair of 12mm thick Perforated fiber board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid, complete all as specified and as directed.
S&F in repairs fancy type MS curtain rods powder coated 25dia, medium weight with end fittings and fixing brackets of required size (two Nos. end brackets and two Nos. wall brackets) fixed with wooden gutties and screws, complete all as specified and as directed.
Demolition of brick/ PCC block / stone masonary built in cement mortar, complete all as specified and directed.
M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6) 20mm graded aggregate and setting in CM 1:6, complete all as specified and as directed.
M&L for Mirror polishing on existing marble/ granite / Kota stone / stone work where ever required to give high gloss finish, complete all as specified and as directed.
M&L for rendering 10 mm thick in cement mortar 1: 6 on fair faces of Brick/AAC block/PCC block work or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster on brick or stone surface of wall built in cement sand mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.
M&L for rendering 15mm thick in two layers (10mm+5mm) in cement mortar 1: 4 mixed with water proofing compound on other than fair faces of brick work / block masonry or concrete surfaces including taking down cement plaster on brick or stone surface of wall built in cement sand mortar including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. (Note :- WPC will be measured and paid separately)
M & L for preparation new plastered surfaces of walls and appplying two coats of cement base paint complete all as specified & as directed.
Suuply only of water proofing compound, complete all as specified and as directed.
M & L for preparation of new surfaces of walls and applying two coats of plastic emulsion paint over primer over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth on wall complete all as specified & directed by Engineer-in-Charge.
M & L for preparation of old steel surfaces exceeding 10 Cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
M & L for preparation of old steel surfaces not exceeding 10 Cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
M & L for preparation old plastered surfaces of walls and appplying one coats of cement base paint complete all as specified & as directed.
M & L for preparation of old surfaces of walls and applying one coat of Plastic emulsion paint complete all as specified & directed by Engineer-in-Charge.
M & L for preparation of old surfaces of wals and applying one coat of oil bound distemper complete all as specified & directed
M & L for preparation of old surfaces of walls and applying one coat of white wash complete all as specified & directed
M & L for preparation of old surfaces of ceilings and applying one coat of white wash complete all as specified & directed
Material and labour for GRC wall cladding tiles over backing coat 5 mm thick sika cream (grey) adhesive & jointed & pointed in white cement mix with colour to match the colour of tile complete all as specified & as directed.
M & L for preparation of old painted surfaces and apply one coat of Floor paint with ready mixed paint for use on floor, complete all as specified & directed by Engineer-in-Charge.
MONA ASSOCIATES
Agarwal Agencies
TULSAYA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .