REPAIR TO CHAIN LINK FENCING, COMPOUND WALL GATES BARBED WIRE AND ALLIED WORKS UNDER AOR OF GE (U) AND SEWAGE RELATEED WORKS AT MH AREA UNDER AGE (B/R) AT GE (U) MEERUT CANTT.

Amount

Dewatering of soakage well or septic tanks/ manhols and sewage line by arranging mechanical sewage machine (sucking machine capacity 8000 ltr in each trip) of any size & capacity including removing the blockage of sewage line through mechanical/hydraulic pressure and removing waste material, sludge etc from out side the MOD land and dispose off at appropriate place complete all as specified & directed.

Cleaning the blockage of P trap/S Trap of WC , gully trap, floor traps, Nahani trap completely enable the sewage to flow freely to 1st manholes, by taking off the grating for removal of sludge and burrying in the ground etc. and resetting the grating after cleaning and removing the sludge and other materials from the manholes/FT/NT and GT by suitable means and removing all the materials obtained from the manholes outside MD land and clearing the complete area including making good any damages to the line or manhols complete all as specified and directed.

Cleaning of septic tank of any size & capacity including inlet and outlet chamber, removing the waste material, sludge etc to out side the MOD land and burying in pits complete all as specified and directed. Note : i) Unit rate quoted shall include the cost of digging out pits, burying the waste material, sludge etc in pit and covering the same with earth. ii) Qty of sludge only shall be measured and paid for after , dewatering of septic tank.

Cleaning of horizontal sewage line of any dia upto 150mm bore dia drain pipes by roding from manhole to manhole and well flushing with water after cleaning including cleaning of manholes by taking off manhole cover and placing in position the same after cleaning and removing the waste material . sludge etc from manholes, burying in pits out side the MOD land complete all as specified and as directed. NOTES:- i) Unit rate quoted shall include the cost of digging out pits burying the waste material, sludge etc in pit, and covering the same with earth. ii) For the purpose of making payments length of drain pipe from manhole to manhole shall be measured .

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs deep and getting out in any type of soil for foundation of manholes etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers soil not exceeding 25 cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, spreading and leveling complete all as specified and directed.

M&L for PCC 1:4:8,Type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer -in-Charge.

Demolition and breaking up drain pipes (salt glazed stone ware) set in cement mortar in 150 mm dia including concrete bed & haunching where required and removing away as directed and specified.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed of drain pipes 150mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested as specified and shown on drgs.

M & L for 150mm bore salt glazed stone ware grade ‘A’ drain pipes, jointed on concrete bed complete including testing all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round to ¾ sections) in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching as required internal dia of pipe 150mm complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round to ¾ sections) in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching as required internal dia of pipe 100mm complete all as specified and directed.

M & L for Pre-cast reinforced cement concrete 1:2:4 , type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slabs including necessary form work complete all as directed by Engineer-in-Charge (Reinforcement shall be measured and paid for separately).

Dismantling of 100/110mm dia of pipes PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge.

Dismantling of 75mm dia of pipes PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring jointed fixed to walls including all fitting and fixtures and taking out old pipe complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring jointed fixed to walls including all fitting and fixtures complete all as specified and directed.

S&F PVC (SWR) 110 mm bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bends any radius complete all as specified and directed.

S&F in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement, bore of pipe in 75mm complete all as directed

Supplied and fixed ,MS Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall base of pipe 75 mm complete all as specified and directed.

Taking down existing unserviceable water closet and S&F Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitng all as specified and directed.

Taking down of existing unserviceable wash down water closet with seat cover and S&F Vitreous China white wash down water closet ( padestal pattern) , including fixing bolts, plastic closet seat, black, closed pattern with recessed bottom and cover and mild steel CP hinging device, including connection to drain pipe, and to flushing pipe and anti syphonic pipe and EWC seat cover flat back including hinges device etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and backing complete all as specified and directed .

M & L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.

S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking up or down GI steel tubing, etc complete all as specified & directed.

Supply&fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking up or down GI steel tubing,etc complete all as specified & directed.

S&F in replacement 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F in replacement 15 mm bore bib tap chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floorcomplete all as specified and directed.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & plag bolts,32 mm CP waste coupling complete all as specified and directed.

Supply & fix in repairs PVC connections of 600mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fix in repairs steel C.P. grating 100 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F in repair 15 mm bore stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Dismantling post or struts ( wood steel, RCC ) any section including taking out embeded portion in concrete etc and making good disturbed ground.

Excavation in any type of soil as in post holes ( or similar holes) getting out and removing surplus soil to a distance n.exc 50 m making good disturbed portion of the surfaces complete all as specified and directed.

M&L for PCC 1:3:6 type D2 ( using 40mm graded crushed stone aggregate) as in foundation filling sub base and mass concrete all as specified.

Supply only Chain link MS galvanisd fencing of dia2.5 mm and 50X50Xmm mesh size wire, any mesh size made into mattresses laped wired laid in position all as specified and as directed by Engr in Charge.(Note :-Weight decided by BOO)

Fixing only chain link fencing including line wires, any mesh size and any type of standards rails straining bolts etc including provision of binding wire any size or any weight as approved by Engineer- in-Charge

M&L for Steel screw bolt (machine made) with hexagonal or square head at one end and screwed other end to be fitted with washers and one hexagonal head nut 5 to 10mm dia and n,exc 10cm long.

M&L for MS round bars 10mm dia and over cut to length bent to shape required cranking bending hooking and as required for link in chain link fencing

S&F Hand rail, half round or other section or core for wooden hand rail straight portion drilled and countershunk for baluster,nosing to steps including embeding in concrete and screwing etc,wind ties for roof including screwing bolts,post and struts running bars for doors, post and strut in fencing including cutting top to shape as directed, drilling hole for wire etc, Flat iron fillet for wire mess and similar work, confirming to Fe-290 Grade E -165

S&F in repair galvanized two strand steel barded wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolt including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed ( Each line wire to be measured)

Taking down cement plaster on brick or concrete or stone walls surface including racking out joints, hacking for keys, scrubbing down with water etc complete all as spd and directed.

M & L for plastering 15mm thick in cm 1:4 on brick walls or concrete surface of finished even and fair all as specified and directed.

M&L for preparing new plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed by Engr -in-Charge

M&L for preparing new plastered surface of wall and applying one coat of primer and two coat of weather proof exterior grade emulsion complete all as specified and directed

Demolition of brick work or stone/boulder masonry laid in cement mortar in any description as directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:6 all as specified and directed by Engr -in-Charge

All as per srl item 57 above but except brick. ( Note:- Old bricks shall be used obtained from demolation of Brick work.)

Material and labour for greasing the steel rolliing shutter including opening top cover,removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as directed by Engr in charge(Area exceeding 4 Sqm and not exceeding 7.5 Sqm of each sutter)

Material and labour for greasing the steel rolliing shutter including opening top cover,removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as directed by Engr in harge(Area exceeding 8 Sqm and not exceeding 15 Sqm of each sutter)

Complete removal of existing treatment from walls , pillars and cornices washing, rubbing down and stopping of distempered and painted surfaces and cleaning the entire area(existing treatment may be of either white wash /colour wash/dry distemper /oil bound distemper /enamel paint) and making the wall surface smooth and applyingone coat of primer and two coat of cement based paint complete all as specified and directed.

Complete removal of existing treatment from walls , pillars and cornices washing, rubbing down and stopping of distempered and painted surfaces and cleaning the entire area(existing treatment may be of either white wash /colour wash/dry distemper /oil bound distemper/enamel paint) and making the wall surfaces smooth and applying one coat of primer and two coat of weather proof exterior grade emulsion complete all as specified and directed

Surface dressing n exe15 cm deep in any type of soil including cutting of vegitation or grass and up rooted tree wherever required , shrubs, bushes and removing rubbish up to a distance of 500 mtrs out side the periphery of area and all as directed

Materials & Labour for preparation of new steel surface of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamels paints over a coat of red oxide primer complete all as specified and directed.

Dismantaling of stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortor,complete all as specified and directed.

M&L for Granite (of any type) 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 10mm thick backing coat in CM (1:4).complete all as specified and directed as approved shape

Dismantling of structural steel work including doors,gates but excluding framed truss etc, complete all as specified.

S&F framed work of rolled mild steel conforming to Gde Fe 410-0 or Fe 310-0 as in gates of angle or other section with gusset plates, rails, braces, etc, to be prepared for hanging with and including either hooks & hinges or steel hanging door fittings and hanging, fastening & fixing including drilling & welding complete.

Demolition of cement concrete of any description in ground floors and paving n exc exc 15 cm thickness,complete all as specified.

M&L for coloured chequered cement concrete tiles 30cmX30cmX25mm thick set jointed and pointed in neat cement slurry with grey pigment cement and pigment over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete.

M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed

M&L for cement concrete in roof kerbs or muds stops rounded or chamfered typeB1 1:2:4 ( 20 mm graded aggregate ) complete all as specified and directed.

M&L for preparation of old steel surfcae of any description over 10 cm width or girth and applying one acoat of synthetic enamel paint complete all as specified and directed.

S&F In repair punched tape concertina coil 1A specification in 500 mm dia entaglments and 150 mm pitch ( Weight not less than 2 kg per rm ) all as specified and directed

vibha associates

YADAV CONSTRUCTION COMPANY

VIRAT CONSTRUCTIONS

M/S KAPIL ENTERPRISES

SA construction co.

BHUMICA CONSTRUCTION

M/S A B CONSTRUCTION

M/S AGARWAL CONSTRUCTION CO.