Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC 39 W 1 ASHOK VIHAR SAKET NAGAR KANPUR 208014 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208014 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹35.0 L+₹77,665 (2.27%)Rejected-Finance | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹35.0 L+₹78,321 (2.29%)Rejected-Finance | L3 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 4 | L4₹35.0 L+₹78,669 (2.30%)Rejected-Finance 25 1 SIMRA P O KIDWAI NAGAR KANPUR UP 208011 | KANPUR | KANPUR | UP | 208011 | L4 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 5 | L5₹35.0 L+₹80,000.40 (2.34%)Rejected-Finance WZ 1043 C IIND FLOOR NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L5 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹46.7 L
EMD Value
₹93,420
Closing Date
12 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJ VISHAL BHURIA
GE I Kanpur Cariappa Road Cantt Kanpur 208004
SPECIAL REPAIR TO BLDG NO 10A (OR COOK HOUSE) OF 944 LT AD REGT WKSP (COMP) AND 02 X MINOR WORKS UNDER AGE B/R-II OF GE (I) KANPUR
2023_MES_626692_2
GE(I)/KAN/T-62 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
KANPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(I) KANPUR
₹93,420
Yes
14 Feb 2024
21 Nov 2023
18 Dec 2023
21 Nov 2023
12 Dec 2023
28 Nov 2023
Amount
Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level).
Dismantling fencing wire mesh, any type, complete all as specified and directed.
Demolition of concrete in ground floors, coping and pavings n exc. 15 cm thickness (below or above ground level
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles
M&L reinforced Cement Concrete (Nominal mix) Type B0 1:2:4 (using 12.5mm graded granite stone aggregate) in Beams, bands, cantilevers, lintals over 1.5M span.
Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips
S&F TMT bars 5mm dia and over upto 10mm dia bars as in stirrups cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips
Form work to bottom, sides and soffits of bands, lintels, cantilevers, shelves including supports etc.
S&F for galvanised 2 stand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (Each line of wire to be measured)
M&L PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in coping, bedplated & other similar work including necessary form works wearthering, slightly rounded angles and theading, complete all as specified
M & L complete removal of existing treatment and applying two coats of oil bond distemper over 2 mm thick wall care putty , complete all as specified and directed.
M & L for Complete removal of existing treatment i.e. white wash ,colour wash ,cement paitn etc. of wall complete and applying two coats of weather coat paint of any colour with machine complete all as specified and directed.all as specified and directed.
M &. L for cutting chases for concealed water tubing and making good in CM (1:3), cutting not exc 10 CM girth in brick wall complete all as specified and directed
Dismantling water tanks and remove to store capacity exc 500 ltrs and n exc 1000 ltrs complete all as specified and directed.
S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity (White colour) hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia pvc float valve assembly complete all as specified and directed.
Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including cleaning of tubes for re-fixing or removal to store, complete all as specified.
Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc., including cleaning of tubes for re-fixing or removal to store, complete all as specified.
M & L for GI tubing of medium grade 15 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified.
M & L for GI tubing of medium grade 20 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified.
S&F, 15mm Bip taps, cast copper alloy(chromium plated) with crutch handle or butter fly handle screwed down , screwed for iron pipe and fixed in repair.
Taking down cement plaster of any description including racking out joints, hacking for keys , scrubing down with water etc.
M & L for Rendering 15 mm thick cement plaster in Cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth w/o using extra cement.
M & L for Rendering 15 mm thick cement plaster in Cement mortar (1:6) on other than fair faces of brick works or concrete surfaces , finished even and fair w/o using extra cement .
M & L for Rendering 15 mm thick in CM (1:4) with mixing integral water proofing compound as per manufacturer's instruction & finished even & smooth without using extra cement complete all as specified. Note : - Supply only water proofing compound shall be measured and paid separately.
M & L for Rendering 10 mm thick cement plaster in Cement mortar (1:3) on RCC Ceiling ,finished even and smooth w/o using extra cement.
M&L for 15mm thick rendering in cement mortar 1:4 on concrete or brick surface complete all as specified and directed
Supply only liquid water proofing compound ISI marked
M&L, applying two coats of distemper oil emulsion over a coat of primer on new surfaces including preparation of new surfaces, finished even and smooth using chalh whiting/ JK wall putty complete all as specified and directed by Engg in charge.
M & L Applying three coats of white wash on celing including preparation of new surfaces, complete all as specified.
M & L for preparation of new plaster surface and Applying one coat Primer and two coat of weather coat paint with machine complete all as specified.
Preparing new surfaces by washing, rubbing down and stopping of painted surfaces and applyig two coats of cement base paint on surfaces of walls/PCC/RCC
M&L for complete removal of existing treatment & preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying Two coat of cement base paint (any colour) on wall with brush complete all as specified
M & L for 50 mm thick, plain cement concrete 1:3:6, type C-1, using 20 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.
Dismentling floors, hearth or wall tiling including cement morter bedding , removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc. and brushing neat cement slurry with 3.0 Kg of cement per Sq mtr complete all as specified and directed
M&L Vitrified tiles , light shade,10 mm thick( square/rectangular) polished ,area of each tile not exceeding 0.36 sqm , laid in floors over 15 mm thick screed bed in cement mortar 1:6, including pointing in white or coloured cement to match the shade of tiles,complete all as specified and directed.
All as per Srl item No 36 above but as in skirting, dados, laid over 10 mm thick rendering of CM(1:4) and -ditto-.
First quality ,Non skid coloured ceramic tiles 7to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.38 sqm, laid in floors over 15 mm thick screed bed in cement mortar 1:6, including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed.
First quality glazed ceramic coloured tiles of size (450x300mm)x7 mm thick,laid on vertical surface such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set in cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking flatforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Labour only for making rounding to edges of granite slab in cooking platform.
M&L second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints wood and making good to wall.
S&F Ball and catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.
S&F 40mm width Continuos (piano) hinges,brass
M&L 20 mm thick PVC board made out of 18 mm thick PVC ply and 1 mm thick PVC ply free from rigid one side prelaminated and one side palin colour, PVC sheet stuck on both side with solvent cement adhesive to make the board of 20 mm thick for cub board & wardrobe .
S&F 40mm dia,brass polished cupboards knobs fixed with nut,screw and washer of mild steel,bright finished in repairs.
Taking down chowkhats or frames n. exc 1.5 sqm each with shutters (without taking of shutters from the frames ).
Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames ).
S & F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F, 35mm thick glazed and skelton shutters (Three panel) of IInd class HW, , open rebated and prepared to receive glass, gauze, etc. ( without sash bars) edge of framming plain chamfered, or rounded, fitted with cut and mitred beads for securing glass etc, size of member of shutters as specified in SSR part I , section 8, clause 8.20(a) , supplied and fitted to chowkhats.
S&F, mild steel 300mm, ordinary rat tail door spring etc complete all as specified.
M & L for Mild steel Framed work as in doors /chowkhats or gates of angle or other section with gusset plates rails,braces ,staircase etc, complete, drilled for fixing of steel sheeting etc prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as directed, confirming to FE-410-W( Gde-E-250).
M & L for Preparation of new or previously untreated wooden surfaces of any description , not otherwise described over 10 cm width or girth and applying two coats of synthetick enamells paint over one coat of pink primer,complete all as specified and directed .
S&F Galvanished mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperature 1.18 mm & fixed with tinned tacks, galvanised wire staples, complete all; as specified and directed by E-I-C.
S&F as in repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples
S&F, Aluminium anodised barrel tower bolts, 150mm long , of extruded section and fixed .
S&F, aluminium alloy anodised sliding door bolts , 16 mm diaof 250 mm long with hasp,staple(bolt type) fixing clips of sheet cast or extruded section , fixing bolts and sliding bolts of extruded section and fixed.
S&F MS Butt hinges medium weight cold rolled of 100 mm size and fixed .
S&F, aluminium handles , 150 mm size, cast type .
S&F, repair Fency type stain less steel curtain rods of 25 mm dia , as in doors/ windows pelmets including SS brackets and SS funnels.
S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
M&L, applying two coats of synthetick enamells paint over a coat of zink oxide primer on steel surfaces , including preparation of new surfaces of any description .
Dismantling of Asbestos cement corrugated and semi corrugated sheets in roof covering complete all as specified and as directed by the Engineer-in-charge.
M&L pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall fixed with screws complete all as specified and as directed.
M & L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L joist channel, angle,or tee section sections, fixed independently, without conctecting ,plates, etc cut to ordinary lenths i.e within 20mm of the length indicated)complete all as specified and as directed
Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height complete all as specified and directed.
Supply & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DUNE (MICRO LOOK) EDGE TILES WITH ARMSTRONG XL 15 mm EXPOSED STEEL ANGLE. The tiles should have Humidity Resistance (RH) of 99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38-41%.The steel angle should be of “Armstrong” make with 15mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32, 27 and 27mm and a load carrying capacity of 7.5 Kgs/Sqm. The T Sections have a Galvanizing of 90 grams per Sqm & passed through 500 hrs of Salt test ,Perimeter trim to be Armstrong wall angles of size 30x19x19mm, secured to walls at 450 mm maximum centre to centre hanging with 4 mm GI wire copmlete all as specified and directed according to manufacturers instruction and Complete.
S& F in repair for Aluminium body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed
S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed.
S&F in repair aluminum powder coated (powder coated required clour) three track sliding window frames of size 92 x 45.50 x 1.50mm thick and shutter frames of size 40 x 18 x 1.55mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40 mm average aperture and fixed with stainless stell wire staples and fixing 5mm thick tinted glass with necessary rubber beading gasket etc all as specified and as directed by Engr-In-Charge.
S&F Aluminium powder coated window and ventilator shutters,sliding typewith two track without sash bars, aluminum sections of size 40mmx20mmx1.5 mm fixed in aluminum anodised frame of section size 60 mmx35.18mmx2mm including necessary jointing cleats cleats , glazing clips , aluminium anodised snap beading ,screws,aluminium beading , pvc packing , aluminium anodised fittings & fixtures with and including galvanised mild steel wire cloth 0.50 mm nominal dia of wire & average width of aperature 1.00 mm and fixed with tinned tacks or galvanised wire staples and necessary fittings & fixtures including powder coating of thickness n.exc 50 micron on all aluminum section , complete all as specified and directed by Engineer -in-charge.
S&F Aluminium powder coated window shutter sliding type of size 40x20x1.5 mm in section fixed in aluminum anodised frame of section size 60 mmx35.18mmx2mm including necessary jointing cleats cleats , glazing clips , aluminium anodised snap beading ,screws,aluminium beading , pvc packing , aluminium anodised fittings & fixtures with and including 4.80 mm thick tinted glass with necessary beading / packing and necessary fittings &fixtures , complete all as specified and directed by Engineer -in-charge.
S&F, aluminium chequered grills as on aluminium windows, wight n.exc .0.50 kg / sqm and fixed all as specified and directed by Engg- in Charge.
M&L for complete removal of old treatment and applying smart care damp block 2k waterproof coating powder as per manufacturing instruction of Asian paint, for damp treatment of wall.
S & F Factory made Machine pressed precast colourd (combination of red and yellow) concrete interlocking paver block any shape or size conforming to IS 15658 of 80 mm thickness M-40 grade with pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed by the Engineer in Charge.
M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor complete all as specified and directed.
M&L for premium quality ceramic coloured tiles for endura series of HR johnson or equivalent as approved wavy pattern of size 300mm x 300mm and 10mm thick of dark coloured (as approved) fixed with neat cement slurry @ 3.00Kg/Sqm over and including 20mm thick screed bed of cement mortar 1:4 including pointing in white cement and pigment complete all as specified and directed by Engineer - in charge.
Cutting groove in brick wall, 75 mm wide and 65 mm deep and shaping horizantal face of groove witn CM (1:3) complete all as specified and as directed by the Engineer-in-charge.
M&L for Atatic ply propylene polymer modified membrane pre fabricated 3mm thick with non woven polyester matt central core of 160 gms/Sqm weighing not less than 3.5kg per sqm laid over primer conforming to IS 3384 @ 0.4 lit/sqm by using LPG/Butane torch and applying uniform pressure with a roller with overlap of 100mm in longitudinal direction and 150mm in transverse direction laid as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge with, including Removing of old Treatment and following courses of descriptions given below :- (a) Second coat of binding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm. (b) Third course i.e. laying of APP modified membrane described hereinbefore with joints sealed with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and curved well before lying the membrane. (c) Fourth course of binding material using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 Kg per Sqm.
M & L For aluminium paint 100ml/Sqm over treated surface on roof complete all as specified and directed by the Engineer-in-charge.
Demolition of brick work built in Cement Mortar complete all as specified and as directed by the Engr-in-charge.
M & L for brick work with flyash bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
S&F Aluminium powder coated window and ventilator shutters,Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including necessary jointing cleats cleats , hinges,glazing clips , aluminium anodised snap beading ,screws,aluminium beading , pvc packing , aluminium anodised fittings & fixtures , complete all as specified and directed by Engineer -in-charge.
S & F 5mm thick tinted glass with necessary rubber beading gasket etc all as specified and as directed by Engr-In-Charge
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.
Point wiring for one light point/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.
All as per srl item No-88 here in above but upto ceiling height and on surface at ceiling.
All as per srl item No-88 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit.
All as per srl item No-88 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.
All as per srl item No-88 here in above but for one 5A socket outlet on the same board controlled by one switch.
M&L for switch piano flush button single pole one way 5/6 amps 240 volts.
Switch piano flush button single pole one way 15/16 amps 230 Volts.
M&L for socket 5 amps 5 pin flush type, 230 volts.
M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts. Make :Cona/SSK/Leader
M&L for ceiling rose surface bakelite 3 terminals.
S & F Lamp holder insulated body with back plate for dome batten fittings.
Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed by engineer-in-charge.
S&F in replacement of wall mounted LED light fittings 20 watt, 6500K, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed.
Supply and fix in replacement of High power LED Wall security light 25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as spfd.
M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FR) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.
All as per srl item No-102 here in above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit .
S & F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, confirming to complete with one MCCB 3 pole 415 Volts 100 Amps, 4 pole rating with rupturing cap 26 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed.
Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
M&L for MCB single pole 240 volts 5 to 30 amps, with rupturing capacity 10 KA using thimbles of required size.
M&L MCB single pole & neutral 240 volts 30 to 63 amps,with rupturing capacity 10 KA using thimbles of required size.
M&L for single pole and neutral enclouser with a top pin, earth plug and socket copmlete with one SPN MCB 25 Amps, 240 Volts.
M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion.
Supply and fixing electric water heater, stoarge type made of ultra thick super cold rolled steel plates, feroglass dry powder coat-ing technology inner tank and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW Capacity, 230 Volt, 1 Phase AC, 50 Hz, 50 Ltrs, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating performance and resistance to oxidation and carbonation at high tempratures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece and writing MES no. in black synthetic enemael paint/engraving tool etc complete all as specified & directed.
Supply & install of exhaust fan 230 V AC single phase of size 300 mm sweep, 900 RPM metal body completed with fixing arrangement, electric connection grouting of nuts, bolts, in wall, electric connection and writing MES No in black synthetic enamel paint/ engraving tool etc all as specified and directed.
Excavation in trenches / foundation in soft / loose soil not exc. 1.5 metre wide and n'exc. 1.5 m deep for HT / LT underground cable / pole foundation and getting out including forming bottom surface to required level or slop, complete all as specified and directed by Engineer-in- Charge.
Returning filling of excavated soil after laying the cable with spreading leveling watering and well ramming in layers not exceeding 25cm thick in loose/soft soil complete all as specified and directed.
Removal of surplus soil/excavated material obtained from ground level to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above from the starting point complete all as specified and directed.
M&L for sand cushning to U/G cable in layers of 23cm thick (8 Cm before laying the cable and 15 cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed. Note: Only punned thickness 18 cm shall be measured and paid.
Taking out carefully unserviceable LT cable upto 35 Sqmm 3.5 core from trenches.
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3.5 core 35 sqmm complete all as specified and directed..
murty construction company
M/S MAA TARA TREATMENT PROJECT
U.R ASSOCIATES
M/S AADI ENTERPRISES
M/s DKS Engineering Works
Khushi Muskan Engineer & Developer
M/S SDS Construction Co.
Allied Builders And Engineers
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .