REPAIR TO JOINERY, PLUMBING, SEWAGE LINE, DRAIN, PATH AND BOUNDRY WALL AT TECHNICAL AREA CAMPBELL BAY

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each complete all as specified and as directed.

Supply and Fixing of solid panel PVC door shutter 30mm thick (style) consisting of frame made out of Ms tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed. Make - Rajashree

Supply and Fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19 x 19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed. Make - Rajashree

Taking down chowkats or frame with shutters (without taking off shutters from the frame), exceeding 1.5 sq. m but n.exc 4.0 sq. m each complete all as directed.

Supply and Fixing of 35mm thick, 2nd class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial veneers ; supplied and fitted to chowkat all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of 2nd class HW, 35mm thick glazed and skeleton shutters, open rebated and rebated and prepared to receive glass or gauge etc., without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for screwing glass / gauge etc., sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) all as specified and directed.

Supply and Fixing of 2nd class HW plain, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 sq. m each all as specified and as directed

Supply and Fixing of flush shutters, 25 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

Supply and Fixing of Hasp and staple, 75 mm long safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and not exc 2.0 sqm each all as specified and as directed.

Material and Labour for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and Fixing of Butt hinges, medium weight, cold rolled mild steel, and fixed wooden door shutter complete all as specified and directed.

Supply and Fixing of Stainless Steel butt hinges 75mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and directed.

Supply and Fixing of 250mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed.

Material and Labour for extruded aluminium alloy handles 150mm, fabricated type, anodized complete all as specified and directed.

Material and Labour for aluminium anodized barrel tower bolt of extruded section length of bolt 150mm complete all as specified and directed.

Material and Labour for aluminium anodized barrel tower bolt of extruded section length of bolt 100mm complete all as specified and directed.

Supply and Fixing of in repair aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

Supply and Fixing of at site wood grain printed PVC sheet, 5 mm thick fixed or laid on to aluminium doors by using rubber based adhesive, as per specification used instead of Plain colour PVC sheet all as specified and as directed by Engr-in-charge.

Supply and Fixing of Anodized aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repairs 12mm dia stainless steel curtain rail 12 mm dia fixing with bracket to required length complete all as specified and directed. Note : rate included for side bracket for fixing complete

Hacking out old broken unserviceable glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

Supply and Fixing of 4mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply and Fixing of 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and Fixing in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including brackets, waste couplings 32mm dia, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Supply and Fixing in repairs, vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush type) with and including connection to trap, set in and including concrete but connection to flushing pipe, anti syphonage pipe etc., complete including making good to floor, connection to drain (or outgoing pipe) etc., complete all as specified and as directed by Engineer-in-Charge (Make : Cera/Johnson/Parry Ware).

Supply and Fixing in repair European type WC (Pedestal Pattern) complete including pedestal pan and trap including connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and directed.

Supply and Fixing in repairs PVC valve less, syphonic action type flushing cistern, 10 liters, low level, white with inlet ball valve, float and handle including brackets complete all as specified and directed.

Taking up or down steel water tubing and connection 15mm dia complete all as specified and as directed.

Supply and Fixing of tubes, medium grade 15mm dia bore galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Re fixing of old steel tubing obtaining from taking down and connections new or old position (wall, ceiling, floors etc.,) of 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connection 20mm dia complete all as specified and as directed.

Supply and Fixing of tubes, medium grade 20mm bore galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old steel tubing obtaining from taking down and connections in new or old position (wall, ceiling floors etc.,) of 20mm bore complete all as specified and directed.

Supply and Fixing of 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 laid in trenches complete all as specified and directed.

Supply and Fixing in repairs angle stop cock 15mm bore, fancy type, chromium plated (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and directed.

Supply and Fixing in repairs bib tap 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly screwed for iron and fixed complete all as specified and as directed.

Supply and Fixing in repairs pillar taps 15mm bore fancy type, cast copper alloy, with capstan head as chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and ply nuts screwed for iron pipes and fixed complete all as specified and directed.

Supply and Fixing in repairs 32mm size waste couplings of PTMT (half or full threaded) minimum weight 32mm 45gms complete all as specified and directed.

Supply and Fixing in repairs towel rail 450mm long of Stainless Steel fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 170gms) complete all as specified and directed.

Supply and Fixing in repairs swivel shower of PTMT any coloured for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and directed.

Supply and Fixing in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

Supply and Fixing of PVC connections 15mm size 600mm long with PTMT nuts complete all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and Labour for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall mixed with water proofing compound @ 2% by the weight of cement, finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only Integral water proofing compound

Material and Labour for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

Material and Labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410 -W (Gde E- 250) quality A all as specified and directed.

Material and Labour for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Material and Labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as directed.

Material and Labour for PCC.1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete for drains all as specified and as directed.

Material and Labour for PCC.1:3:6 type C2 (using 40 mm graded stone aggregate) as in walls of drains & toe walls etc any thickness, size or shape all as specified and as directed.

Material and Labour for use and waste of formwork to faces of walls, retaining walls, abutments and similar work including attached pilasters, buttresses, etc vertical or to batter for rough finished surfaces all as specified and as directed.

Material and Labour for use and waste of form work to faces of walls, retaining walls, abutments and similar work including attached pilasters, buttresses, etc vertical or to batter for fair finished surfaces of concrete

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds complete

All as per item No 59 but Add or deduct for each 25mm girth or part thereof over or under 30cm girth

Material and Labour for Boulder filling as in weep holes with gauge 40 to 80mm, hand packed tightly all as specified and as directed.

Cleaning the chocked soakage of manholes of any size and depth and removing scum/sludges to a distance exceeding 250m and not exceeding 500m and cleaning with fresh water by taking out carefully cover slab placing in position including setting the cover slab in cm 1:6 complete all as specified and as directed.

Cleaning of blocked CI pipe line 100 mm bore, carefully in between manholes using splitted bamboo, cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete all as specified and as directed.

Cleaning of blocked CI pipe line 150mm bore, carefully in between manholes using splitted bamboo cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete all as specified and as directed.

Cleaning of blockage manually by rodding, pumping, etc. and removing the deposited sludge/solid/liquid material, outside MD land, complete all as directed from the following: - (a) Water closet any description including trap and CI pipe line up to first manhole

(b) Floor trap/Nahani trap up to & including gully trap

(c) Pipe from gully trap up to first manhole (excluding gully trap)

NOTE : An Amount of Rs 20210.00/- towards Schedule of Credit shall be deducted to arrive the Contract Sum

AR CONSTRUCTIONS

MAHESWARI CONSTRUCTIONS

M/S PANNER SELVAM

B.R. ENTERPRISES

RS ENGINEERING WORK

S K ENTERPRISES

MAJUMDAR FURNITURE