Providing LIS Horticulture Land from Changawati Khad to Tharmala in GP Himri and covered adjoining portion of GP Rawlakiar and Ramngar in Tehsil Kotkhai Distt Shimla

Amount

Cutting in earth work and disposal of excavated earth up to a lead of 20 mtr. With in all leads and lifts as per the direction of the Engineer- in- charge.

i) Pick Work

ii) Jumper Work

Excavation in foundation trenches etc. in earth work,lift upto 1.2 meters staking the excavated soil not more than 3mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required in to plinths sides of foundation etc. Consolidating each deposited layers by ramming and water and then disposing of all surplus excavated earth with in all leads and lifts as per the directions of the Engineer in charge.

Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm (Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge.

Providing and laying cement concrete 1:1:2 (1cement :1Sand: 2 graded stone aggregate 20 mm N/S) and curing complete excluding cost of form work and reinforcement for Rainforced concrete work in:-

i) Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge.

ii) Walls (Any thickness) attached pillasters, pillasters, buttresses, beam girder and contilevers upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.

Providing and laying cement concrete 1:2:4 (1cement :2 Sand: 4 graded stone aggregate 20 mm (Twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.

Providing mild steel/tor steel for RCC work including bending and binding placing in position complete upto floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.

Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads and lifts as per the direction of the Engineer-in-charge

i) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like.

ii)Flat surfaces such as soffits and suspended floors, roofs landing and the like: Floors etc up to 200 mm in thickness .

Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in R.S. Joists,channels, angles, tees etc. with in all leads and lifts as directed by the Engineer Incharge

Providing and fixing MS Sheet Man hole cover with locking arrangement including lock, nuts & bolts & other fittings complete with in all leads & lifts as per the entire satisfaction & direction of the Engineer Incharge.

S/F Galvanised steel bar bed wire ( IS 278-1962 Type-I 0 weighting 9.38 Kg/100 mtr.(minimum ) staining and fixing to any type of standred rails, straining bolts including securing with and provision of galvanised mild steel pins etc. as directed ( posts & stuts of wood , concrete, steel etc. and straining bolt shall be paid for seperately)

Supplying and Fixing of pressed steel door frame

Laying, jointing and testing in trenches galvanized mild steel tube of the following dia. Meters including smooth bending by necessary bends or through pipe bending machine with necessary all pipe fittings such as Tees, elbows, union and Reducers etc. of ISI marked ans testing for leakage complete with in all leads and lifts as per the entire satisfaction of Engineer-In-Charge ( Earth work in trenches to be measured and paid for seperatly )

40 mm dia.

32 mm dia.

25 mm dia.

Providing and fixing of Brass full way wheel valve repuited make and class of the following diameter including necessary all pipe fittings with in all leads and lifts as per entire satisfaction of Engineer- In- Charge.

40 mm dia.

32 mm dia.

25 mm dia.

Dinesh Singh Thakur