CANAL STRUCTURE REPAIRING WORK OF KAKA SAHAB GADGIL SAGAR PROJECT

Excavation in all kind of soft/loose/ hard/ dense soils, moorum & moorum mixed with boulders and mud including dressing placing the excavated soil neatly in specified dump area or disposing off the same as directed, including cost of site clearance, all materials, machinery ,labour and dressing etc. complete.

Maintenance of canals wherever required, having bed width between 1m to 5m or discharge between 1 cumec to 10 cumecs (as applicable) by deploying a unit of JCB, Dumper/ Tractor trolley and 10 numbers of labour to restore the bed levels and side slopes of canal section including service road to proper condition including clearance of all vegetation such as grass, shrubs, bushes etc. and disposal of surplus earth, as needed, including cost of all materials, labour and transportation etc. complet for earthen canal

Maintenance of canals wherever required, having bed width less than 1m. or discharge less than 1 cumec (as applicable) by deploying a unit of JCB, Dumper/Tractor trolley and 10 numbers of labour to restore the bed and side slopes of canal section including service road to proper condition including clearance of all vegetation such as grass, shrubs, bushes etc. and disposal of surplus earth or borrow of earth, as needed, including cost of all materials, labour and transportation etc. complete. for earthen canal

Providing, fabricating and placing in position steel reinforcement bars for Reinforced cement concrete / Plain Cement Concrete structures including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping / welding joints wherever required, tying with 1.25 mm diameter soft annealed steel wire etc. Complete.

Providing and laying M-15 grade Plain Cement Concrete Design Mix using graded aggregate clean, hard for super structure ncluding cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing ,packing joints of shuttering etc. complete. Using graded aggregates of maximum size. 20MM

Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type gate with frame consisting of skin plate, sealing frame, stiffeners, horizontal and vertical girders, guide, stainless steel flat/Brass flat, rivets, wedges, lifting rods etc., with all accessories as per relevant IS code including frame & gate complete set for Canal Cross, Escape, Head regulator /Tank head regulator including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, seal fixing, tools and tackles etc.,applying two coat of zinc rich epoxy primer to give dry film thickness of 70± 5 microns and finish coat(two coats)of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150± 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials.

Providing, Laying and jointing nonpressure (NP2) RCC pipes with collar joint including testing of joints (Conforming to IS ; 458-1988, IS 783:1985) etc. Complete 900 mm dia. (NP2) R.C.C. Pipes