Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.1 LAccepted-AOC B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹49.6 L+₹2.8 L (5.95%)Rejected-Finance 22 JANKALYAN SOCIETY NAVJIVAN AJWA ROAD BARODA 390 019 | BARODA | VADODARA | GUJARAT | 390019 | L2 | Rejected-Finance Being Other than Lowest Tenderer | |
| 3 | L3₹50.5 L+₹3.7 L (7.96%)Rejected-Finance PART III GANESH MURTHI NAGAR CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Being Other than Lowest Tenderer | |
| 4 | L4₹50.9 L+₹4.1 L (8.82%)Rejected-Finance | L4 | Rejected-Finance Being Other than Lowest Tenderer | |
| 5 | L5₹51.0 L+₹4.2 L (8.97%)Rejected-Finance | L5 | Rejected-Finance Being Other than Lowest Tenderer |
| Sl No | Description | Qty | Unit | SHRI SAI ENTERPRISES L1 | P LAXMI AND CO. L3 | ADITYA CONSTRUCTION L2 | shubham construction L5 | SHRIKALP ENGINEERS AND CONTRACTORS L4 | siddharth and company L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Materials and Labour in repairs for finding leakages in pipeline of any length, type & size and rectification of leakages and applying run lead joint/spigot & socket joint/flange joints/D joint etc including provision of jointing material such as lead/flanges /clamps/jute/ rubber gaskets/nuts/ bolts/ washers /grease/socket etc, and testing of line after leakage rectification complete all as specified and directed. Note : (i) The cost of labour for excavation in any kind of strata, cutting of RCC/PCC surfaces/road, returning filling, fixing of joint, T&P and making good to the existing is included in the rate quoated by the contractor.(ii) Testing shall be carried out in the presence of Engineer-in-charge to the satisfaction of department. (iii) The cost of joints, fittings, nut, bolts, clamps, flange, rubber packing, welding, D joint of any size etc shall be included in quoted rate (iv) Repair to the leakage after informing complaint by concerned JE E/M or Engr-in-Charge within 24 hours. In case of failure noticed more than 24 hrs recovery shall be effected @ Rs.500/- per hour beyond 24 hrs. | 30 | Each Job | 4,000 ₹1,20,000 | 2,100 ₹63,000 | 1,500 ₹45,000 | 1,250 ₹37,500 Lowest | 4,400 ₹1,32,000 | 2,000 ₹60,000 |
| 2.00 | Construction of brick masonry valve chamber in repair of size 1.2 x 1.2 x 1.2 M (internal dimension) (above GL 0.30 mtr) suitable for fixing of sluice valves, 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3, finished even and smooth, without using extra cement, 5 mm thick plate cover on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements ,hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified. | 6 | Each | 3,000 ₹18,000 Lowest | 6,500 ₹39,000 | 5,000 ₹30,000 | 4,500 ₹27,000 | 3,300 ₹19,800 | 5,000 ₹30,000 |
| 3.00Disconnecting all electrical connections of pumpset and dismantling horizontal / vertical split casing pump / Submersible pump of any make/model, dismantling and taking out pump shaft assembly complete for replacement of pump bearing DE or NDE, pump gasket including servicing, oiling and greasing the pumpset and assembling after replacment of defective parts and connecting to coupling testing & commissioning complete all as specified and directed for following sizes / capacities of pump :- | |||||||||
| 3.01 | Bearing suitable for pump coupled with 120/100 HP motor. Make : SKF bearing No.3309/ 6309/ or equivalent"/ NBC/THORDON/ RHP/NBC/THORDON/ RHP | 2 | Each | 8,500 ₹17,000 | 11,000 ₹22,000 | 9,500 ₹19,000 | 8,500 ₹17,000 | 11,000 ₹22,000 | 2,000 ₹4,000 Lowest |
| 3.02 | Bearing suitable for pump coupled with 60/75/50/40 HP motor. Make SKF bearing No. 3309/ 6309/ 3307/ 6307 or equivalent"/ NBC/THORDON/RHP | 3 | Each | 7,500 ₹22,500 | 10,000 ₹30,000 | 9,000 ₹27,000 | 9,500 ₹28,500 | 8,800 ₹26,400 | 2,000 ₹6,000 Lowest |
| 3.03 | Bearing suitable for pump coupled with 10/12.5/ 15/ 20/ 25/ 30 HP" motor. Make : SKF bearing No. 3306/6306/ 3307/ 6307/ or equivalent" /NBC/THORDON/RHP | 5 | Each | 5,500 ₹27,500 | 9,500 ₹47,500 | 8,000 ₹40,000 | 8,500 ₹42,500 | 5,500 ₹27,500 | 2,000 ₹10,000 Lowest |
| 3.04 | Bearing suitable for pump coupled with 7.5/5 HP motor. Make : SKF bearing No. 3306/ 6306/ 3305/6305 or equivalent" /NBC/THORDON/RHP | 4 | Each | 4,500 ₹18,000 | 8,500 ₹34,000 | 6,000 ₹24,000 | 5,500 ₹22,000 | 5,500 ₹22,000 | 2,000 ₹8,000 Lowest |
| 3.05 | Bearing suitable for pump coupled with any HP motor bearing suitable for . Make : SKF bearing No. 3310 ATN9/21315EK EXPLORER or equivalent" /NBC/THORDON/RHP | 5 | Each | 3,500 ₹17,500 | 8,000 ₹40,000 | 5,000 ₹25,000 | 4,580 ₹22,900 | 11,000 ₹55,000 | 2,000 ₹10,000 Lowest |
| 4.00S&F in repair DE/NDE bearing of electric driven motor coupled wih pump including necessary greasing reassemble the motor connect, testing and commissioning complete for following capacity motors :- | |||||||||
| 4.01 | Motor capacity 125/100 HP bearing suitable for. Make : SKF bearing No. 6317/ 6314/ 6313 or equivalent" /NBC/THORDON/RHP/NBC/THORDON/RHP | 2 | Each | 12,500 ₹25,000 | 11,000 ₹22,000 | 9,500 ₹19,000 | 9,000 ₹18,000 | 9,900 ₹19,800 | 8,000 ₹16,000 Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
8 Jul 2025, 6:55 pmClosed
LT COL ANIL KUMAR S
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8187 REPAIR MAINTENANCE OF EXTERNAL WATER SUPPLY PIPELINE DISTRIBUTION NETWORK INCL REPLACEMENT OF CI/GI/DI PIPELINES AND CONNECTED WORK OUTSIDE NAVAL DOCKYARD UNDER GE (NW) KUNJALI
2025_MES_715795_1
8187/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹98,000
Yes
28 Sept 2025
20 Jun 2025
10 Jul 2025
26 Jun 2025
8 Jul 2025
1 Jul 2025
20 Jun 2025 - 26 Jun 2025
Amount
Materials and Labour in repairs for finding leakages in pipeline of any length, type & size and rectification of leakages and applying run lead joint/spigot & socket joint/flange joints/D joint etc including provision of jointing material such as lead/flanges /clamps/jute/ rubber gaskets/nuts/ bolts/ washers /grease/socket etc, and testing of line after leakage rectification complete all as specified and directed. Note : (i) The cost of labour for excavation in any kind of strata, cutting of RCC/PCC surfaces/road, returning filling, fixing of joint, T&P and making good to the existing is included in the rate quoated by the contractor.(ii) Testing shall be carried out in the presence of Engineer-in-charge to the satisfaction of department. (iii) The cost of joints, fittings, nut, bolts, clamps, flange, rubber packing, welding, D joint of any size etc shall be included in quoted rate (iv) Repair to the leakage after informing complaint by concerned JE E/M or Engr-in-Charge within 24 hours. In case of failure noticed more than 24 hrs recovery shall be effected @ Rs.500/- per hour beyond 24 hrs.
Construction of brick masonry valve chamber in repair of size 1.2 x 1.2 x 1.2 M (internal dimension) (above GL 0.30 mtr) suitable for fixing of sluice valves, 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3, finished even and smooth, without using extra cement, 5 mm thick plate cover on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements ,hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified.
Disconnecting all electrical connections of pumpset and dismantling horizontal / vertical split casing pump / Submersible pump of any make/model, dismantling and taking out pump shaft assembly complete for replacement of pump bearing DE or NDE, pump gasket including servicing, oiling and greasing the pumpset and assembling after replacment of defective parts and connecting to coupling testing & commissioning complete all as specified and directed for following sizes / capacities of pump :-
Bearing suitable for pump coupled with 120/100 HP motor. Make : SKF bearing No.3309/ 6309/ or equivalent"/ NBC/THORDON/ RHP/NBC/THORDON/ RHP
Bearing suitable for pump coupled with 60/75/50/40 HP motor. Make SKF bearing No. 3309/ 6309/ 3307/ 6307 or equivalent"/ NBC/THORDON/RHP
Bearing suitable for pump coupled with 10/12.5/ 15/ 20/ 25/ 30 HP" motor. Make : SKF bearing No. 3306/6306/ 3307/ 6307/ or equivalent" /NBC/THORDON/RHP
Bearing suitable for pump coupled with 7.5/5 HP motor. Make : SKF bearing No. 3306/ 6306/ 3305/6305 or equivalent" /NBC/THORDON/RHP
Bearing suitable for pump coupled with any HP motor bearing suitable for . Make : SKF bearing No. 3310 ATN9/21315EK EXPLORER or equivalent" /NBC/THORDON/RHP
S&F in repair DE/NDE bearing of electric driven motor coupled wih pump including necessary greasing reassemble the motor connect, testing and commissioning complete for following capacity motors :-
Motor capacity 125/100 HP bearing suitable for. Make : SKF bearing No. 6317/ 6314/ 6313 or equivalent" /NBC/THORDON/RHP/NBC/THORDON/RHP
Motor capacity 60/75/ 50/40" HP bearing suitable for. Make SKF bearing No. 6313/ 6311/ 6310/6310-2Z or equivalent"/ NBC/ THORDON/RHP
Motor capacity 10/12.5/15/20/25/30 HP" bearing suitable for. Make : 6308/ 6208/ 6209/ 6307 or equivalent" /NBC/THORDON/RHP
Motor capacity with 7.5/5 HP bearing suitable for . Make : SKF bearing No. 6306/ 6305/ 6206/ 6205 or equivalent /NBC/THORDON/RHP
M & L for in repair replacement of rubber coupling Make : FENNER/ FINOLEX of size as per Existing including testing.
S&F in repair pressure gauge 150 mm dia range 0-10 kg/Sqcm , Make : FIEBIG. Note : Rate quoted deemed to be included for providing adopter/Ferrule/check nut etc required for fixing of pressure guage.
S&F in repair MS coupling suitable to 100/75/60/50 HP pumps at various installations.
All as per item No. 6 above but suitable for 40HP/20HP/10HP.
M&L for transporting electric burnt motor to authorised workshop for rewinding strip opening and dismantling complete rotor and stator assemby, cutting; and taking out old burnt copper winding from the stator assembly and cleaning the slots of stator with carbon tetra chloride solution. Material and labour for rewinding complete stator assembly with and including super enamelled copper winding wire of suitable gauge machine with existing. Applying the minimum two coats of insulation varnish and keeping the stator assembly in heating chamber to improve insulation value. Assembling the motor , transporting back at site, coupled with the pumping sets allingments properly, connecting the LT cables and testing and commissioning complete all as specified and directed by Engr-in-Charge for electric Motors of following capacities :-
100/125 HP capacity
75/60 HP Capacity
40/50 HP Capacity
30/25 HP Capacity
15/20 HP Capacity
5/7.5/10 HP Capacity
S&F in repair/replacement of main contactor suitable for following capacity of motors including taking down old one :-
75/60 HP motor, MNX 95, 3 pole, 415V, 50 Hz Make :L&T/Havells/Siemens
40/50 HP motor, MNX 70, 3 pole, 415V, 50 Hz Make :L&T/Havells/Siemens
S&F in repair/replacement of over load relay suitable for following capacity of motors including taking down old one :-
100 to 7.5 HP motor , Relay range (35-50A) 415V, 50 Hz Make : L&T/Havells/Siemens
S&F in repair/replacement of MCCBs fixed in existing panel board Make : L&T/Havells/Standard/CG including taking down old one of following capacity :-
MCCB 3 Phase (TP) 200A 50Hz, 35 KA. 415V, 50 Hz
MCCB 3 Phase (TP) 100A 50Hz, 25 KA, 415V, 50 Hz
MCCB 3 Phase (TPN) 63A 50Hz, 25 KA, 415V, 50 Hz
M & L for replacement of unserviceable shaft sleeves for following capacity pump sets :-
Suitable for 40/30 HP
Suitable for 15/ 20 HP
Suitable for 10HP
M & L for replacement of unserviceable impeller as per existing make and sample suitable for following capacity pump sets :-
Suitable for 40/30 HP
Suitable for 10 HP
Suitable for 30HP
Suitable for 15 HP
Supply and fix in repair direct on line (DOL) starter 3 phase 415 Volts up to pumpset 05 HP capacity.
Material and labour for repairing, metal filling, turning and grinding of pumpset shaft on machine for the following capacity pump sets complete all as specified and directed.
40 HP Pump set
30 HP Pump set
15 HP Pump set
20 HP Pump set
7.5/10 HP Pump set
M&L for replacement of gland packing suitable for pump set 125 HP to 10 HP complete with removing worn out gland, cleaning etc. Make:-Champion or equivalent as approved be GE
Supply and fix in repair/replacement of Star Delta Starter for 40 HP Motor, 415V, 50 HZ Make :L&T/Havells/Siemens
Supply and fix in repair/replacement of Star Delta Starter for 30 HP Motor, 415V, 50 HZ Make :L&T/Havells/Siemens
Supply and fix in repair/replacement of Star Delta Starter for 20 HP Motor, 415V, 50 HZ Make :L&T/Havells/Siemens
Supply and fix in repair/replacement of Star Delta Starter for 15 HP Motor, 415V, 50 HZ Make :L&T/Havells/Siemens
Taking down and dismantling centrifugal pump sets of following capacity installed at various water supply installations for servicing/overhauling , greasing and replacement of worn out parts which shall be measured and paid separately under the relevant items of Sch `A' :-
M & L for run lead joint in repair with pig lead including pumping out accumulated water from the leak site and necessary earth work in any type of soil,to repair the joints for following sizes of pipes :-
200 mm bore
150 mm bore
100 mm bore
S&F in repair heavy duty sluice valves flanged end, cast iron body, heavy duty flanged and drilled and non rising type brass spindle with nut, long body, class PN 16, conforing to IS 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water all as specified and directed. Make:- Sant, Kirloskar, Kartar, Zolota and of following size.
250 mm bore
200 mm bore
150 mm bore
100 mm bore
Taking up or down, steel water tubing, and connection including cleaning for re-fixing or removal from site of work, 100 mm bore, complete all as directed.
All as per item No 25 here-in-before but 80 mm dia
All as per item No 25 here-in-before but 50 mm dia
All as per item No 25 here-in-before but 40 mm dia
All as per item No 25 here-in-before but 25 mm dia
All as per item No 25 here-in-before but 20 mm dia
All as per item No 25 here-in-before but 15 mm dia
Supply and fixing in repair/replacement of steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends &,laid in trenches fixed on wall with all fitting including taking down existing rusted pipes for the following sizes all as directed and specified Make:- Jindal/Tata/prakash surya
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
100 mm bore
Supply and fix in repairs in existing line, gun metal gate valve with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified of following sizes :- Make : Kirloskar/Zolota/Kantan
40 mm bore
50 mm bore
25 mm bore
20 mm bore
Supply and fixing in replacement of cast iron pipes with spigot and socket ends centrifugally cast heavy grade class B in any length laid in trenches of following sizes. MAKE:-LAMCO INDUSTRIES LTD/ ELECTRO STEEL/ Jindal/ Tata
200mm bore
150mm bore
100mm bore
80mm bore
S&F in repair MS plate cover 5mm thick of valve chamber,under groundsump/ over head tank, including necessary fabrication work with hinges, handle and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified.
Taking down DI/CI special, corroded MS sections and S&F angle iron frame of size 50 x 50 x 6 mm of valve chamber, over head tank, UG sump including necessary fabrication work with any size of channel, angle, beam complete all as specified
(a) Supply & installation with replacement , testing complete of DIGITAL WATER LEVEL INDICATOR DEVICE, operating on Single Phase Supply, direct display in 150 mm size digit display system which must show water in meter/centimeter or gallon of water level of SUMPS/OVER HEAD TANK ensuring alarm while water fall or rise at predetermined limit with 1 minute auto off alarm.
(b) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230 volts+/- 5% with reliable in digit display & alarm at low & high level of SUMPS/OVER HEAD TANK.
(c) The circuit must be housed in MS CRC Sheet box with nylon moulded connection strips. The level system must resistance trasducer which unaffected by corrosion and other contacts available in water. The product must be controlled by micro switch (should not be sensor system).
(d) The whole unit must electronically controlled and the upper level and lower level indicator must be highly sensitive MICRO SWITCH. The complete unit must be fitted in MSCRC sheet box and be installed at PUMP HOUSE with proper powder coating paints.
(e) The required flexible copper cable of 0.5/1.5 sqmm, 3 core size from SUMPS/OVER HEAD TANK to PUMP HOUSE to be provided for connection of both units.
Note: GI Conduit for protection of copper cable including taking down existing unserviceable water level indicator is included in quoted rate.
Material and labour for preperation of steel/iron surface of old painted surface of any description , not otherwise described, painting one coat with red oxide zinc chrome paint and 2 coat with synthetic enamel paint of superior quality any colour specified for any size of pipe upto 200mm dia as per site complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation/laying of pipe etc and getting out in hard dense soil complete all as specified.
Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm deep as in soil complete all as specified .
Removing surplus excavated soil to a distance not exceeding 50 m and deposited where directed complete all as specified.
S&F PVC water storage tank and fixing in position at any location and making in replacment all incoming & out going connection , provision of new tank fittings & connecting it at existing position complete all as specified and directed of following capacity :-
(a) 5000 Ltr capacity
(b) 3000 Ltr capacity
(c) 2000 Ltr capacity
(d) 1000 Ltr Capacity
(e) 10000 Ltr Capacity
Supply and fix in repairs LT 1100 volts grade submersible cable, flat 6 Sqm 3 core, PVC insulated and seathed copper screen protected with multi stranded copper conductor complete all as specified and directed by Engr-in-charge.
Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. MAKE : Gloster/Polycab/Finolex Note : 1. The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.
Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. MAKE : Gloster/Polycab/Finolex Note : 1. The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.
Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. MAKE : Gloster/Polycab/Finolex Note : 1. The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.
Attending complaints to all kinds of pump motors by qualified mechanic to check and test DOL/star-delta starter connections including settings of relay and timer, NO & NC contacts, main power connections, fixing of cable joints,fixing gland packing of approprate size to the pump motors, rectifying pump leakages by replacing flange, rubber packing and nut bolts of existing size and cleaning of pump motors to confirm the satisfactory running with replacement of following items. The cost of minor spares such as lugs of all size, wires, nut, bolts, washer, Flanges, rubber packing, gland packing, cable joints, motor fan etc are included in quoted rate by contractor. Note: Repair to defects after informing within 24 hours, in case of failure noticed more than 24 hrs recovery shall be effected @ Rs.500/- per hour beyond 24 hrs.
Taking down old unserviceable Non return valve, supply and installed, connecting and testing , Non return valve cast iron flanged both end connecting in line with nut bolts, rubber packing etc complete all as specified and directed by Engr- in charge of the following sizes :-
(a) 80 mm dia
(b) 100 mm dia
(c) 150 mm dia
Supply and fix in repair brass foot valve heavy duty 50 mm/65 mm dia brass including all accessories such as rubber packing, nut, bolts, flanges etc
(a) Above 65 mm upto 80 mm dia.
(b) Above 80 mm upto 150 mm dia.
Supply, fixing and testing in replacement of entranso 2.5 three phase sliding gate operator motor complete with electronic control unit and frequency drive suitable for gate weight 2500kg including remote control set with receiver, pair of safety photocell, 3 way push button, 24 Vdc LED flashing lamp and cable and conduit for push button, photo cell and flashing lamp as per site requirement capacity complete all as specified and directed. Note : The cost of minor spare part and required cables are deemed to be included in the quoted rates.
Material and labour for fixing of overhead PVC tank covers of any size as per site requirement complete all as specified and directed.
Material and labour for painting of pump motor of any size and capacity, painting one coat with red oxide zinc chrome paint and 2 coat with synthetic enamel paint of superior quality any colour all as specified and direted.
ADITYA CONSTRUCTION (BID ID -3350828)
P LAXMI AND CO. (BID ID -3348202)
SHRIKALP ENGINEERS AND CONTRACTORS (BID ID -3349439)
shubham construction (BID ID -3350836)
siddharth and company (BID ID -3346466)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .