REPAIRS TO WATER PIPELINE, CLEANING OH/UG TANK AT MILITARY STATION SRI GANGANAGAR

Amount

Excavation in trenches in soft/loose soil & getting out in n.exc. 1.5 m wide & n. exc. 1.5m in depth for foundation etc n. exc 10 sqm on plan and n. exc. 1.5 m in depth in soft/loose soil and getting out complete all as specified and directed by Engineer - in - Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm in soft/loose soil complete all as specified and directed by Engineer - in - Charge

Removing excavated material n. exc. 50 m & depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed by Engineer - in - Charge.

M&L for cutting/dismantling of PCC hardstanding / WBM road with soling & premix carpet of any description for repair/replacement of water supply pipe lines and disposal of debris & rubbish to a distance exc 250m but not exc 500m and making good the same with & including plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 50 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 80 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for100 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 150 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 200 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified and directed by Engineer - in - Charge.

S&F in repairs cast iron detachable joint with rubber ring, ISI marked, Class-A, suitable for 250 mm bore GI pipe/ cast iron pipe/special with nuts, bolts etc complete all as specified & as directed.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 80mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified and directed by Engineer - in - Charge.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 100mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified and directed by Engineer - in - Charge.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 150mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified and directed by Engineer - in - Charge.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 200mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified and directed by Engineer - in - Charge.

M&L for repair to existing leaking run lead joint of CI/DI pipe or fittings of 250mm bore spigot and socketed ends by dismantling joint by melting the lead with the help of burner/blower including taking out old spun yarn and re-jointing with & including additional quantity of Pig lead required and good quality of spun yarn and testing of joint including necessary excavation & earth work in any type of soil including dewatering complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 40mm bore with & including all fittings complete, fixed to walls and ceilings or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 40mm bore, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 50mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 50mm bore, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 80mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 80mm bore, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 100mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 100mm bore, complete all as specified and directed by Engineer - in - Charge.

M&L for galvanized steel water tubing medium grade of 150mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 150mm bore, complete all as specified and directed by Engineer - in - Charge.

Supply and fixing Cast iron fittings (ISI marked) upto 150 mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for spigot & socketed pipes, complete, fixed in repairs, complete all as specified and directed by Engineer - in - Charge.

Supply and fixing Cast iron fittings (ISI marked) 200 mm to 300 mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for spigot & socketed pipes, complete, fixed in repairs,complete all as specified and directed by Engineer - in - Charge.

M&L for new run lead joint for 80 mm bore CI spigot & socketed end pipe and fittings including preparation of ends & jointing materials, coupling & testingcomplete all as specified and directed by Engineer - in - Charge.

M&L for new run lead joint for 100 mm bore CI spigot & socketed end pipe and fittings including preparation of ends & jointing materials, coupling & testingcomplete all as specified and directed by Engineer - in - Charge.

M&L for new run lead joint for 150 mm bore CI spigot & socketed end pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified and directed by Engineer - in - Charge.

M&L for new run lead joint for 200 mm bore CI spigot & socketed end pipe and fittings including preparation of ends & jointing materials, coupling & testing complete all as specified and directed by Engineer - in - Charge.

S&F mild steel clamps made of flat iron 40x6mm in two halves for tapping through 40 to 80mm bore GI/DI water pipe line including drilling and welding of 15/20mm GI socket and necessary rubber insertion, nut, bolts & washers complete all as specified and directed by Engineer - in - Charge.

S&F mild steel clamps made of flat iron 40x6mm in two halves for tapping through 100 to 150mm bore GI/DI water pipe line including drilling and welding of 15/20mm GI socket and necessary rubber insertion, nuts, bolts & washers complete all as specified and directed by Engineer - in - Charge.

S&F 15mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 15mm bore, complete all as specified and directed by Engineer - in - Charge.

S&F 20mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 20mm bore, complete all as specified and directed by Engineer - in - Charge.

S&F 25mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 25mm bore, complete all as specified and directed by Engineer - in - Charge.

S&F 50mm bore Gun metal gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, including dismantling & taking out old unserviceable gate valve of 50 mm bore, complete all as specified and directed by Engineer - in - Charge.

M&L for repair to unserviceable sluice valve of size 80mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle/lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer - in - Charge.

M&L for repair to unserviceable sluice valve of size 100mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle/lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer - in - Charge.

M&L for repair to unserviceable sluice valve of size 150mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle/lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer - in - Charge.

M&L for repair to unserviceable sluice valve of size 200mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle/lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve,complete all as specified and directed by Engineer - in - Charge.

M&L for repair to unserviceable sluice valve of size 250mm bore by dismantling and opening the gland cap and head of sluice valve and taking out the unserviceable lock nut, fitting the material and fixing new (if required) serviceable spindle/lock nut , grinding the material cutting the threads by lathe machine and fabrication of new lock nut with cutting the threads inside the lock nut according to the spindle threads and refixing in the same position, testing the sluice valve, complete all as specified and directed by Engineer - in - Charge.

S&F cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 150 mm bore, complete all as specified and directed by Engineer - in - Charge. Make:- BIR, Kirloskar, Upadhaya

S&F cast iron body sluice valve heavy duty class ‘PN-1.6’ of 100 mm bore, ISI marked with IS 14846, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 80 mm bore, complete all as specified and directed by Engineer - in - Charge. Make:- BIR, Kirloskar, Upadhaya

S&F cast iron body sluice valve heavy duty class ‘PN-1.6’ of 150 mm bore, ISI marked with IS 14846, both fla-nged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel ha-ndle, cast iron cap, complete with 3mm thick neoprene ru-bber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable CI sluice valve of 100 mm bore,complete all as specified and directed by Engineer - in - Charge.. Make:- BIR, Kirloskar, Upadhaya

Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

AYUSH BUILDERS

Aggarwal brothers and company

Lalgarhia Enterprises