Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.5 L
Closing Date
21 Oct 2026, 3:00 pm
Chief Engineer, CED
Civil Engineering Division, Bhabha Atomic Research Centre, Trombay, Mumbai - 400 085.
Providing and applying painting works in general areas, along with minor repairs at CISF Command Posts, Pump House, Water Tank, and Substation at various locations including Trombay and Mandala Hill, BARC, Mumbai, for the year 2026-2027
2026_BARC_927014_1
BARC/CED/ET/43/2026-2027 DATE 21/09/2026
Open Tender
Civil Works
Item Rate
275 days
Trombay and Mandala Hill, BARC
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹2.5 L
CED, BARC, Trombay, Mumbai
21 Sept 2026
21 Sept 2026
26 Oct 2026
21 Sept 2026
21 Oct 2026
5 Oct 2026
21 Sept 2026 - 29 Sept 2026
29 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1A) Hill area (Item no. 1 to 31) Earth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge. | |||||
| 1.1 | From 0.00 to 1.50 m depth from Average Ground Level | 15 | CuM | - | - |
| 2Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. Note: Payment will be made for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil from corresponding STACK / TRUCK Measurement | |||||
| 2.1 | Soil | 15 | CuM | - | - |
| 3Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Note: 1) Structural steel required for the work shall not be supplied by the Department and the contractor has to procure the same. 2)Welding weights, connections, bolts and nuts, anchor bolts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate.(3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. (4) Edges of plates shall be grinded to uniform smooth finish. (5) Full length welding shall be carried out as directed by the EIC. | |||||
| 3.1 | Up to and including 300 mm Joists, 350 mm channels, and below sections Using materials of approved equivalent quality/ product meeting technical parameters, confirming to IS 2062. All test reports to be provided along with the supply of the materials. | 1 | MT | - | - |
| 4 | Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge. | 210 | SqM | - | - |
| 5 | Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge. | 20 | SqM | - | - |
| 6 | Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters. | 20 | PAIR | - | - |
| 7 | Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters. | 50 | PAIR | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 14.46 MB
Tendernotice_2.pdf
PDF • 1.72 MB
BOQ_974174.xls
BOQ • 0.37 MB
TechnicalbidET43.xls
Tender Documents • 0.07 MB
ProformaofScheduleAtoFET43.pdf
Tender Documents • 2.35 MB
ScheduleAET43.pdf
Tender Documents • 0.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .