Construction of trunk road in 480 nos PMAY houses (urban) at Jahirpur kurshi road Lucknow under infrastructure work

Supply & Filling of Earth, cartage from outside of scheme from 6.00 km in embankment in ordinary soil excavation to be in the form of regular pits not exceeding ½ Mtr.(20") in depth and earthwork embankment to be in 20 cm. (8") layers including ramming & dressing the surface to required levels and slopes and also including 1.5 Mt. (5fts) lifts and 30 mtr. (100") lead. The earth from cutting to be used and making embankment or to be deposited spoil banks with in 30 mt. (100ft.) distance as directed by the E/I.

Construction of granular sub-base (GSB) by providing close graded material, confirming to Grade-I(size range 75mm to 0.075 mm) ,mixing in a mechanical mix plant at OMC, carriage of mixed material bu tippers to work site ,far all leads and lifts spreading in uniform layer of specified thickness with moter gradder on prepared sueface and compacting with vibratory roller to achieve the desired density complete in all respect and as per specification and direction of engineer-in-charge .

S/L for Separation membrane of impermeable plastic sheeting 125 micron thick as directed by the E/I.

Providing and laying in position bitumen hot sealing compound on expansion Joints etc. (100mm width & 50mm deep) as per direction of E/I.

Providing and laying of Rubber moulded reflective Zig-Zag 80mm thick interlocking Concrete Block Pavements (strength not less than 30 Mpa) as per drawings and technical Specification with base clause 1504

Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/tie bars wherever required, laying at site spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. Channel setions, curing making provision for contraction/expansion, construction & longitudinal joints (10mm wide x 50mm deep) by groove cutting machine providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (item of joint fillers, sealants dowel bars with sleeve/tie bars to be paid separately) Cement concrete manufactured in automatic batching plant (RMC Plant) i/c transportation to site in transit Mixer.

M.S. Iron Work in Plain Work Such as RCC Or RB Work (when not included in over all rates) wrought for required shape as necessary including bending for proper complete of work and also including supply of steel its wastage bends work and authorised over laping shall be measured upto floor.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) complete in all respects.

Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) complete in all respects.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) complete in all respects.