Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.3 LAccepted-AOC NO 9 BYRAVESHWARA INDUSTRIAL ESTATE ANDRAHALLI MAIN ROAD NEAR PEENYA 2ND STAGE BENGALURU 560 091 | BENGALURU URBAN | KARNATAKA | 560091 | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹32.0 L+₹4.1 L (14.8%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹43.5 L+₹15.6 L (55.9%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
25 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) GORAKHPUR
GE(AF) GORAKHPUR PIN-273008
WELCOME MAINT OF OFFRS ACCN INCLUDING INTERNAL ELECTRIC SUPPLY, FAN AND GEYSER AT GRD KUNRAGHAT AND NCC ENCLAVE AT GORKHPUR
2022_MES_543113_1
8912/E8
Open Tender
Civil Works
Item Rate
330 days
GE(AF) GORAKHPUR
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE(AF) GORAKHPUR
₹60,000
Yes
6 Oct 2022
3 Aug 2022
26 Aug 2022
3 Aug 2022
25 Aug 2022
13 Aug 2022
Amount
M&L for preparation old decorated surfaces of any description, including cornices and applying one coat of white wash on walls complete all as specified and as directed.
All as per item No. 1 above but two coat of white wash on walls.
All as per item No. 1 above but on ceiling surfaces.
M&L for preparation of old decorated surfaces and applying one coat of cement based paint on walls complete all as specified and as directed.
M&L for complete removal of existing treatment of wall and applying two coats of cement based paint on walls over a coat of primer complete all as specified and as directed.
M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying one coat of oil bound distemper white or tinted with roller complete all as specified and as directed.
All as per item No. 6 above but one coat of oil bound distemper on ceiling surface.
All as per item No. 6 above but two coat of oil bound distemper on walls.
M&L for preparation of old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surface of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.
Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall, finished surface even and smooth without using extra cement complete all as specified as directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall with liquid WPC @ 150 ml per 50 kg of cement or as per manufacturer instruction finished even and smooth without using extra cement complete all as specified as directed. Note: WPC will be measured and paid separately.
M&L for rendering 5mm thick in CM 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified as directed.
M&L for taking down cement or cement of any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc, rendering 15mm thick in two layers of 10 + 5 mm thick CM 1:4 mixing with pidi proof 101 LW(+) of Dr fixit or equivalent integral water proofing admixture @ 200 ml per 50 kg of cement over two coats of super latex 302 of Dr fixit or equivalent in ratio 1:4:7 (one part super latex, 4 parts water and 7 parts of cement) @ 1.5 kg of homogeneous mixture per sqm in two coats and finish the surface even and smooth without using extra cement) for external surfaces of wall complete all as specified as directed. Note: Pidi proof and super latex will be measured and paid separately.
M&L for taking down cement or cement of any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc, rendering 15mm thick in CM 1:6 mixing with pidi proof 101 LW(+) of Dr fixit or equivalent integral water proofing admixture @ 200 ml per 50 kg of cement over two coats of super latex 302 of Dr fixit or equivalent in ratio 1:4:7 (one part super latex, 4 parts water and 7 parts of cement) @ 1.5 kg of homogeneous mixture per sqm in two coats and finish the surface even and smooth without using extra cement) for wall complete all as specified as directed. Note: Pidi proof and super latex will be measured and paid separately.
Supply only pidi proof 101 LW(+) of Dr fixit or equivalent integral water proofing admixture complete all as specified and as directed.
Supply only super latex 302 or equivalent integral water proofing admixture complete all as specified and as directed.
M&L for preparing new plastered surface of wall and applying three coats of white wash as directed.
M&L for preparation new plastered surface of wall and applying two coat of oil bound distemper and a coat of primer over a coat of 1mm thick Birla putty as base coat complete all as specified and directed.
M&L for preparation new plastered surface wall and applying two coat of cement base paint over one coat of alkali resistant primer complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.
All as per item No. 22 above but 20mm bore.
S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as specified and directed.
All as per item No. 24 above but 20mm bore.
S&F in repair rotational moulded polyethylene water storage tanks 500 ltr capacity triple layered ISI marked white colour (cylindrical vertical with closed top) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore complete all as specified and directed.
All as per item No. 26 above but 1000 ltrs capacity.
Disconnecting existing tanks of 500 &1000 liters in capacity), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 250 liters & n.exc. 500 liters capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 500 liter & n.exc. 1000 liter capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed.
S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed of 20mm bore (Minimum weight 210 gms) complete all as specified and directed.
S&F in repairs gun metal gate valves 20mm bore with iron wheel head screwed both ends for iron pipe and fixed to complete all as specified and directed.
S&F in repair stop valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repairs 15 mm bore angle cock (two -in-way) brass chromium plated fancy type, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and directed.
S&F in repair concealed stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs angle valves, 15 mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos bracket, complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern EWC including trap, seat cover, including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified and directed.
S&F in repair vitreous china water closet squatting pan, 'Orrisa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.
S&F in repair plastic water closet seat cover white, closed pattern with flat bottom & cover and aluminium anodised hinging device complete all as specified and directed.
S&F in repair 10 litre capacity PVC low level flushing cistern with ball valve and handle / push button, 32mm dia PVC flush pipe complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts, of length 450mm complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts, of length 600mm complete all as specified and directed.
S&F in repair chromium plated shower roses with or without swivel joints, any size with arm incl fixing to steel pipe or union complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and directed.
S&F in repair stainless steel sink with drainage board made out of 1mm thick steel sheet for kitchen with plug, washer waste pipe, MS cantilever bracket, connection union overall size 915x460mm with bowl size 410x310x160mm complete all as specified and directed.
S&F in repairs stainless steel plate rack of minimum size 970x770x230mm of standard quality, fixed to wall with wooden gutties and screws complete all as specified and directed.
S&F in repairs brass CP wash basin mixer (Two way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and directed.
S&F in repairs PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cmx35cm x15cm complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repairs brass chromium plated health faucet with 15mm dia reinforced pipe complete all as specified and directed.
S&F in repairs Jet faucet with 15mm dia reinforced pipe complete all as specified and directed.
S&F in repair soap dish CP any size complete all as specified and directed.
S&F in repair toilet paper holder complete all as specified and directed.
S&F in repair CP grating 125 mm size complete all as specified as directed.
S&F in repair PTMT grating 125 mm size complete all as specified as directed.
Demolition and breaking up drain pipes SWG, AC or RCC or PVC set in cement mortar 100mm dia complete all as specified and directed.
S&F 110mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trench complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
S&F 110 mm bore PVC (SWR) shoe with access door complete all as specified and directed.
S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement all as specified.
S&F in repair PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.
S&F 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trench complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.
S&F in repair 40mm dia, PVC waste pipe for sink complete all as specified and directed.
S&F in repair 32mm dia, PVC waste pipe for wash basin complete all as specified and directed.
Dismantling stone slab & tiles of any description complete all specified and directed.
M&L for granite (of any type) 18 to 20mm thick machine cut and polished bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over & including 20 mm thick screed bed in CM 1:6 etc complete all as specified as directed.
All as per item No. 71 here in above but in skirting over 10 mm thick cement mortar in 1:3.
Rounding to edge of stone slab one edge, such on in stop, cooking platform, and other similar situation complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
S&F non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm and n.exc. 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.
All as per item No. 75 above but in thick as in dado/ skirting including 10mm thick rendering screed in CM 1:4.
S&F non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm and n.exc. 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surface of size 300x200x7/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over screed bed 10 mm thick in CM 1:3 complete all as specified and directed.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.
All as per item No. 79 above but in thick as in dado/ skirting including 10mm thick rendering screed in CM 1:3.
Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 sqm each and removing from site complete all as specified and directed.
All as per Item No. 81 above but exc 1.50 sqm and n.exc 4 sqm each.
Taking down shutter of any description n.exc 1 sqm each and removing from site complete all as specified and directed
All as per item No. 83 above but exc 1 sqm and n.exc 2 sqm each.
Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2sqm each complete all as specified and directed.
M&L second class hard wood plain, solid, chowkhat and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified as directed.
S&F pressed steel frames of profile 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F Pressed steel frames of profile 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in filling of hold fast hole complete all as specified and directed.
M&L for 35 mm thick IInd class hard wood plain framed, paneled shutter (two panel or more) with lock rails and panel of 9 mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I) 2001 complete all as specified and directed.
M&L for second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/gauge etc, without sash bars, mitered and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I (2009).
S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.
M&L prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination in pelmet boxes, cup board shutters etc, rebated or flat edged fixed in repairs complete all as specified as directed.
S&F Factory made solid PVC Chowkhat /Door frame of size 50x47mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part-II (2010) complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2010.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame glazed with putty or fixed beads complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new ones complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
All as per item No. 99 above but figured glass, pin headed.
S&F in repair acrylic sheet in windows panes complete all as specified and directed.
S&F 250mm long aluminium anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts, sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F 200mm long aluminium anodized barrel tower bolt, complete all as specified and directed.
S&F aluminium anodized pressed handle, cast type of size 125mm, complete all as specified and directed.
S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S&F 75mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S&F hasp and staple, aluminum alloy, anodized, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws, size 75 mm complete all as specified and directed.
S&F in repair 250mm long aluminium anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts, sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repair 200mm long aluminium anodized barrel tower bolt, complete all as specified and directed.
S&F in repair aluminium anodized pressed handle, cast type of size 125mm, complete all as specified and directed.
S&F in repair hasp and staple, aluminum alloy, anodized, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws, size 75 mm complete all as specified and directed.
S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.
S&F in repair alumnium curtain rod (Dropery rod) plastic coated 20 mm dia including end Knobs fancy type nickel polished golden or sliver colour as per sample. complete all as specified as directed.
S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
S&F in repair steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F in repair steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F in repair steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.
Dismantling MS grills / guard bars from window frames / verandah railing complete all as specified and directed.
S&F mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of water tanks etc ant type of work conforming to Fe 290, grade E-165 complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 2nd class hard wood cleats as in small fitting such as brackets of any type latch and hinge blocks shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu.cm each etc complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/ blankets, any thickness, including cover filets complete all as specified and directed.
M&L for non asbestos 4mm thick fiber cement building boards fixed or laid/inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping including aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I. wire (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expansion hold fasteners 12.50mm dia 40mm long complete all as specified and directed.
S&F in repair PVC tank cover for 500 ltrs & 1000 ltrs water tank complete all as specified and directed.
S&F in repairs brass CP wall mixer with hand shower and over head (Three way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and directed.
S&F in repairs brass CP wall mixer with over head shower (Three way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and directed.
S&F in repairs brass CP wall mixer (Two way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flap 20mm when open complete all as specified and directed.
Taking down carefully (aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.
M&L for point wiring for one light/fan point controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed.
All as per item No. 133 above but for one 5 Amps socket point controlled by one 5 Amps switch on same board.
All as per item No. 133 above but for one 5 Amps socket point controlled by one 5 Amps switch on independent board.
All as per item No. 133 above but for light point controlled by two two way switch.
All as per item No. 133 above but for one bell point controlled by one 5 Amps bell push.
M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken modular type pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 133 to 138- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.
S&F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.
S&F switch piano, flush type 5/6 amp, single pole, two way 240 volt complete all as specified and directed.
S&F switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.
S&F socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.
S&F socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.
S&F fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.
S&F bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.
S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.
S&F Call bell ding dong , AC single pole 240 volts complete all as specified and directed.
Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.
M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)
M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 6.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 sqmm conductor cable, 1 No 4.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)
S&F 8/9/10 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed.
S&F 18/20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Syska Cat part No. SSK-RA-1801 or equivalent in approved make.
S&F recess mounting LED luminaire of size 2'x2' white 42 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make: Havells Cat part No. PLUTONEO2X2PLR42W LED840S or equivalent in Bajaj / CG.
S&F, testing energy saving, die cast aluminium housing IP 65 protection, 45 W LED street light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-Havells Cat No. ENDURAPEARLNEOSL45WLED757PASYTOPC. or equivalent in Bajaj/Philips/CG/ WIPRO/SYSKA
S&F in replacement lamp holder polycarbonate insulated body with back plate complete all as specified and directed.
S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs including One No. MCCB,4 pole, 63/100 Amps, 16 KA and 24 Nos MCB 6 to 32 Amp SP complete all as specified and directed.
S&F in replacement MCCB,4 pole, 100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.
S&F in replacement MCB, 4 pole, 63 Amps current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.
S&F in replacement factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 6 SP MCBs as outgoings complete all as specified and directed.
S&F in replacement MCB, SPN, 32 to 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.
S&F in replacement MCB, SP, 10 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.
S&F in replacement sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.
M&L for earthing complete as in replacement with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed.
M&L for earthing complete as in replacement with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth strip GI 25x4mm by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed.
Repairing of unserviceable light point (normal/ flameproof), fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type lamp any type MCB DB's & all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect with all replacement of any major part but including small length of wires (not more than 50cm) adhesive cable and other connected minor accessories by providing sufficient and skilled manpower. Work shall also include to check & removal of leakages in service connection /sub main of houses as and when directed. The scope also include cutting of existing Bakelite sheet to accommodate new wiring accessories like switches, sockets, fan regulators etc. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum 3 complaints. (b) The contractor or his representative will take complaint from MES complaint Register through MES Job card. (c) The contractor will made separate items register with location and signature of user (d) The contractor will maintain complete detail of JOB card and items involved with date and user signature (e) The ladder and T&P as required will be provided by the contractor (f) Risk factor will be the contractor's end (g) Material will be measured and paid separately in the relevant item here after.
Supply only in replacement electronic fan regulator 230 V, stepped type, socket type, complete all as specified and directed.
Supply only in replacement switch piano flush type single pole, one way 5 amps complete all as specified and directed.
Supply only in replacement switch socket combination multipurpose 5 pin 5/15 Amps single pole one way complete all as specified and directed.
Supply only in replacement switch piano flush type single pole, two way 5 amps complete all as specified and directed.
Supply only in replacement bell push 230V, complete all as specified and directed.
Supply only in replacement Call bell ding dong , AC single pole 240 volts complete all as specified and directed.
Supply only in replacement switch piano flush type 15 Amp single pole complete all as specified and directed.
Supply only in replacement socket out let 3 pin 15 Amp flush type complete all as specified and directed.
S&F in repairs LED light fitting 1x12 watt surface mounted LED slim down lighter in powder coated white finish with integrated electronic driver complete all as specified and directed.
S&F in repairs LED bulb 9 watt complete all as specified and directed.
Disconnecting, taking down & removing carefully the existing ceiling fan, exhaust fans, wall bracket fans, air circulating fans and pedestal fans etc. of any description, any sweep and from any position/ locations for repairs/servicing/numbering, dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing, fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessary adjustment and proper alignment of blades, hanging/fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of the department complete all as specified and directed. Note:- (i) The replacement of defective/nonfunctional parts shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item.
Supply only ball bearing No. 6200 to 6203 complete all as specified and directed. Make:-SKF/NRB/NBC/TATA
Supply only gun metal bush of any description and size to suit existing motor shaft complete all as specified and directed.
Supply only capacitor of capacity 2.5 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA
Supply only capacitor of capacity 3.15 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA
Supply only capacitor of capacity 4/6 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA
Supply only complete fan hanging assembly set comprising with rubber reel, MS clamps, nuts, bolts with one lock hole and lock pins suitable for any type of fans & down rods complete all as specified and directed.
Supply only PVC insulated, flexible cable, twin core twisted of size 23/0.0076 with copper conductor in pieces for connecting fans complete all as specified and directed.
Supply only 300mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified and directed.
Supply only 900mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified and directed.
Taking out & removing old burnt-out winding of electric fans of any description and rewinding of motor of ceiling fans 1200/1400 mm sweep with appropriate size super enameled copper wire including insulating material such as illumines paper, letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of the department. Make of winding wire: Atlas/Finolex/Devi Dayal
All as per item No. 186 above but rewinding of motor of exhaust fans of 225/250 mm sweep.
All as per item No. 186 above but rewinding of motor of exhaust fans of 300/400 mm sweep.
All as per item No. 186 above but rewinding of motor of exhaust fans of 450 mm sweep.
All as per item No. 186 above but rewinding of motor of air circulating fan of 400 mm sweep.
All as per item No. 186 above but rewinding of motor of pedestal fan of 400 mm sweep.
Taking down existing worn out louvers of any description, in any position and supplying & fixing new louvers made out of MS sheet 22 gauge thick suitable for exhaust fan of 230/300mm sweep complete all as specified and directed. Note: The louvers shall be of shape, size and pattern as approved duly painted with two coats of synthetic enamel paint over a coat of red oxide primer.
All as per item No.192 above but suitable for exhaust fan of 450 mm sweep.
M&L for painting of existing fans of any description (ceiling fan/exhaust fan/Air circulators/Wall mounted fans/Pedestal fan) with applying one coat of synthetic enamel paint (White) by spray machine including preparation of existing decorated surfaces of fans including engraving MES No. of fan in capital letters of height not less than 20 mm on fan body all as specified and directed.
S&F ceiling fan complete with all electronic fan regulator and accessories of capacity 230V, 1200 mm sweep, BEE 5 star rating complete all as specified and directed. Make: Havells, Model No. ES 50 Premium 5 or equivalent in Bajaj/Crompton.
Taking down geysers carefully of any type and make of capacity 25 ltrs after disconnecting water supply and electrical connection, opening of geysers for inspection of unserviceable parts followed by servicing overhauling after replacement of unserviceable component with cleaning of heating element and inner tank by de-scaling including assembling fixing in position, making all electrical & water supply connection, making functional and testing complete all specified and directed. Note: Component/spare part required for replacement shall be paid for separately under respective item here in after as supply only
All as per item No. 196 above but of capacity 50 ltrs.
M&L for painting of geyser 25 ltrs capacity after proper cleaning and filing of cavities with filler compound applying one coat of synthetic enamel white colour paint by spray machine including writing MES No. on geysers with black colour paint complete all as specified and directed.
All as per item No. 198 above but of capacity 50 ltrs.
Supply only in replacement heating element pin type 1.5 KW rating capacity 230 V, ISI marked complete all as specified and directed.
Supply only in replacement heating element pin type 2.0 KW rating capacity 230 V, ISI marked complete all as specified and directed.
Supply only in replacement heating element threaded type 1.5 KW rating capacity 230 V, ISI marked complete all as specified and directed.
S&F in replacement 3 core copper flexible cable of size 4 sqmm complete all as specified and as directed.
Supply only in replacement thermostat ISI marked for 25/50 Ltrs capacity geyser complete all as specified and directed.
Supply only in replacement power indicating lamp circular/rectangle type suitable for 25/50 ltrs capacity geyser complete all as specified and directed..
Supply only in replacement safety pressure/air lock valve suitable for geyser 25/50 Ltrs capacity complete all as specified and directed.
Supply only in replacement gasket with stud for aperture assembly of any type geyser complete all as specified and directed.
Supply only in replacement top or bottom cover for any make of geyser of 25/50 Ltrs capacity complete all as specified and directed.
S&F in replacement gun metal non return valve heavy duty 15mm dia complete all as specified and directed.
S&F in replacement gun metal non return valve heavy duty 20mm dia complete all as specified and directed.
S&F in replacement PVC connection pipe 450 mm long heavy duty with check nut for 15 mm dia pipe complete all as specified and directed.
S&F in replacement hot water supply PVC connection pipe of size 450mm long heavy duty with check nut for 15 mm dia pipe ISI marked complete all as specified and directed.
S&F in replacement terminal plate with screw for Geyser 25/50 Ltrs capacity complete all as specified and directed.
S&F in replacement plug top 3 pin, 15 Amp, 230 V complete all as specified and directed.
S&F, installation, testing of electric Water heater storage type geyser (with EPAC Inner Tank & ABS Body with Metallic Finish Color Panel) of capacity 25 litres suitable for single phase 230 Volts, AC, 50Hz, BEE 5 star rating complete with all mounting arrangement, Hot & Cold water connection pipe, 3 pin plug top etc as required at site complete all as specified and directed. Note:- Any disturbed surfaces of wall will be matched with existing colour surfaces. complete all as specified. Make: Model Pebble 25L of Make Havells or equivalent in V-Guard/Bajaj/ Racold
S&F exhaust fan single phase 230/240 volt AC 450mm sweep, 1400 RPM with painted louvers, metal body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan and making good to match the existing surface and making connection with twisted copper flexible wire 23/0.0076mm complete all as specified and directed. Make: Havells/Bajaj/CG.
A K CONSTRUCTIONS
m/s allied enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .