Construction of 0.40 lac gallons Rapid sand filtration plant including cost of Back wash tank, Clariflaculator, Flash Mixer and Sluice chamber including providing and fixing of Electrical / Mechanical components for WSS Budgam Town Phase II (JKIDFC)

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.

All kinds of Soil

Providing and laying dry stone solling.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)

150 mm dia. nominal bore (Medium)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in. Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and Fixing of 250 mm dia D.I pipe

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. Sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately).Second kail wood (35 mm)

Providing and fixing Stainless steel railings.

Form work Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platforms. 5

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Edges of slabs and breaks in floors and walls

Carriage of various materials by Mechnical transport from source upto the dumping site of work including loading , un-loading and stacking etc

Cement/ steel for an avg. Lead 10 Kms

Sand & For an avg. lead of 48 kms

Bajiri For an avg. lead of 18 kms

stone solling for an avg. lead of 15kms

Bricks avg. Lead25 kms

Providing and fixing /Installation of Mechnical / Electrical for 0.10 MGD Rapid Sand Treatment plant at WSS Budgam Town Phase II.

Mechnical Equipment supply installation and commission.

C.I sluice valves double flanged ( Kirloskar/Indian make)

200 mm dia with tail peices

150 mm dia with tail peices

G.I Gate valves

80 mm dia

C.I double flanged pipes and pipe fittings

Providing and fixing of pipes.

200 mm dia

Fittings.

200x200x200 mm tee

200x90" bend

150x90" bend

GMS Tubes (G.I pipe and fittings)

80 mm dia G.I pipes

50 mm dia G.I pipes 90"

Motors

25 HP Mortor for blower

10 HP for bridge

10 Hp black wash solution tanks

Misc water treatment euipment

Mixing arrangement for flash mixer along with suitable gear arrangement (Complete Job)

Sludge scrapping Mech, system for floculator.

Fitter under drainage system 40 mm dia PVC pipes (Laterals) with 9 mm dia perforation 1.2 mtr length.

Main fold 200 mm dia 6.0 Mtr long

Air blowers capacble of providing compressed air 50 cft / min mortors fitted with drive arrangement complete.

Misc items / Acessories

C.I manhole covers

Byepass gates rectangular plates to be fixed in water channels

Providing and laying fitted media

Fine sand / curse sand

Gravel 12-50 mm

Lab. Equipment complete job.

Checmical dosing A 1 Capacity mortor with coupled to suitable Mechanism with necessaru reduction gear araangement form mixing alum.

Bleaching powder solution A one HP capacity Mortor unit coupled with suitable missing arrangements for strring the HP solution along with suitable acessories.

A suitable PVC pipe along with good quality PVC fittings / Control valves for carring BP alum solution.

Module chambers

P/F ROF indicator

Discharge meter / loss of head indicator 1249600

Pipes

Back wash pipe 200 mm

P/F of elevated Operational gears for control valves.

Sludge disposal pipe 250 mm / clear water sump

Cost for P/F Electrification with standard CU wire I/C all switch / sockets corroder etc for 3 Phase electrical system.

Lighting points (LED) 15-30

Heavy points (15 A)

P/F start 3 phase of Havells / Anchor

P/F of Installation of voltge Stabilizer 25 HP (3 Phase) including all Electrical system

P/F of main supply cable.

P/F and installation / sucessful testing and commissioning of rotatory bridge electricity manula driver with 7.5 hp 2 phase mortor with stand by unit including all cable wiring , starter , etc complete in scrappes and fastened by P/F of M.S rail complete job.

P/F installation , testing and commissioning of electric panel board including 3 phase core cable , with all wirings , 3 phase for back wash booster , chirnes for alum and bleech tanks , sludge scrapper bridge including installation of 3 phase immersed stablizer with digital voltmeters for inlet / outlet including all costs of MCBs, electric / heatings points complete.