PETTY ESSENTIAL REPAIR TO WATER SUPPLY SYSTEM AT DOMESTIC AREA UNDER GE AF TECH AREA AGRA

Amount

Taking up/down GI tubing in any length including fitting from trenches, walls, ceilings for relaying/replacement for the following sizes all as specified and directed :-

(a) 15 mm bore tubing

(b) 20 mm bore tubing

(c) 25 mm bore tubing

(d) 40 mm bore tubing

(e) 50 mm bore tubing

(f) 80mm bore tubing

(g) 100mm bore tubing

M&L for Laying only in trenches GI tubing in any length with connections as retrieved from item No 1 here-in-before after cleaning, washing or removing old screw thread as required & providing new fittings, as required, complete all as specified and directed for the following sizes :-

(a) 15 mm bore tubing

(b) 20 mm bore tubing

(c) 25 mm bore tubing

(d) 40 mm bore tubing

(e) 50 mm bore tubing

(f) 80mm bore tubing

(g) 100mm bore tubing

M&L for laying or fixing only, GI tubing with connections in any length as retrieved from item No 1 here-in-before, fixed to wall, ceiling or laid in floor after cleaning, washing or removing old screw thread as required & providing new fittings, wherever required, complete all as specified and directed for the following sizes :-

(a) 15 mm bore tubing

(b) 20 mm bore tubing

(c) 25 mm bore tubing

(d) 40 mm bore tubing

(e) 50 mm bore tubing

(f) 80mm bore tubing

(g) 100mm bore tubing

Supply, laying, testing GI tubing medium grade in trenches in any length including required GI fitting complete all as specified and directed for the following bore :-

(a) 15 mm bore tubing

(b) 20 mm bore tubing

(c) 25 mm bore tubing

(d) 40 mm bore tubing

(e) 50 mm bore tubing

(f) 80mm bore tubing

(g) 100mm bore tubing

Supply, fixing, testing GI tubing medium grade on walls/ceiling or laid in floor in any length including GI fitting complete all as specified and directed for the following bore :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

M&L in for drilling & tapping cast iron mains in position for branch connection of 20mm bore GI pipe with MS clamps including necessary earth work if required etc complete all as specified and directed.

Supply & fixing in renewal gun metal globe or gate valve with iron wheel head, screwed both ends ISI marked for the following sizes all as specified & directed :-

(a) 50mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

(e) 15 mm bore

S&F in renewal bib tap 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed

M&L in renewal for lead joints including spun yarn & taking out old lead by burning etc for the following bore of CI pipe /fittings complete all as specified and directed Note: (i) The quoted rate shall be deemed the necessary earth work (ii) Old taken out lead to be used in making of lead joint

(a) 300 mm bore

(b) 200 mm bore

(c ) 150 mm bore

(d) 100 mm bore

(e) 80 mm bore

Dismantling, opening head of sluice valve, taking out wedge nut/spindle with nut/wedge for replacement and refixing after replacement of Gun metal wedge nut and stainless steel spindle and refacing/regrinding sheet etc for the following size of sluice valve including nuts, bolts, washer, rubber packing and gland complete all as specified and directed.

(a) 300 mm bore

(b) 150 mm bore

(c) 100 mm bore

(d) 80 mm bore

Supply & fixing in renewal of cast iron body sluice valve ISI marked PN 1.6 and conforming to IS 14846 with stainless steel spindle of following sizes :-

(a) 400 mm bore

(b) 300 mm bore

(c) 200 mm bore

(d) 150 mm bore

(e) 100 mm bore

(f) 80 mm bore

M&L in renewal for ‘D’ joints complete with collars, rubber ring, nuts & bolts etc for following bore complete all as specified and directed.

(a) 300 mm bore

(b) 200 mm bore

(c) 150 mm bore

(d) 100 mm bore

(e) 80mm bore

(f) 50 mm bore

Supply & fixing in renewal of non return valve ISI marked including complete fixing accessory of following sizes:-

(a) 150 mm bore

(b) 100 mm bore

(c) 80 mm bore

Supply,lowering and testing in renewal 32 mm dia high density polythylene column pipe in bore well ISI marked pressure rating PN-10 (ie 10 Kg/cm²) and with jointing material and HDPE fitting including taking down old U/S HDPE pipe.

Supply & laying in renewal PVC insulated and PVC sheathed copper conductor cable 2.5 Sqmm, 3 core flat for 1100 volts AC including connecting with submersible motor to starter panel complete all as specified and direced.

Taking out submersible pumping set of 1.5/2.0 HP and lowering after repair with replacement of bushes, sleeves, shaft, PVC impeller and rewinding of motor including testing all as specified and directed.

Supply, erection, of wall mounted cubical type panel board of overall size not less than 600mm width x 600mm Height (Without Canopy & Base Channel) x 600mm Depth, M.S. Channel (MC-75) Base Frame (to be mounted on the angle iron frame of suitable size groutted with PCC(1:2:4) type B-0 in wall, suitable for single phase 3 wire, 230 volts AC supply and incoming & Outgoing MCB for termination of cables . The Feeder Pillar shall be duly fabricated in a approved / certified factory / fabrication House who posseses test certificate from CPRI and having modern fabrication comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032 (SIEMENS GRAY). The control panel board shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The control panel board shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having front opening facility (with double layer shutter) with locking facility and 2 side slanting canopy type roof on top. The feeder pillar shall be comprising of starter, condenser, voltmeter, indicator lamp Amp meter MCB / cut out of suitable capacity for 1.5 / 2 HP for single phase submersible pumping set etc complete all as directed by Engineer in charge.

Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.

M&L for Cutting of cast iron pipe in position for insertion of new tee, caller etc including necessary earth work if required etc complete all as specified and directed for the following bore: -

M & L in renewal for flange joints with rubber sheet 3mm thick, including nuts, bolts complete all as specified and directed etc for the following bore:-

Taking out U/S submersible pump set including motor from bore well of capacity 1.5HP after disconnecting all electrical connections & supply, fixing, lowering, commissioning & testing submersible pump set of discharge capacity 70 LPM at 57 metre head single phase , 230 volt AC electric driven 2900 RPM of 1.5 HP including necessary wiring from motor to panel etc complete all specified and directed.

S&F in repairs cast iron foot valve, flangel type with flanged, ISI marked, including making flanged joints with & including 3mm thick rubber sheet, nuts & bolts etc of suitable size for following bore complete all as specified and directed.

(a) 80mm bore

(b) 100mm bore

Taking up cast iron water mains in any length (including all fittings), with flanged/spigot and socket ends and lead joints including burning out joints and recovering lead for the following cast iron water mains complete all as specified and directed.

(a) 100 mm dia

(b) 150 mm dia

Relaying of CI/DI pipe of following dia obtained from item No 25 above in any length complete all as specified and directed.

(a) 100 mm dia

(b) 150 mm dia

M&L for DI pipes ISI marked with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, in any length coforming to IS: 8329(2000) as per latest amendments, laid in trenches with & including its special and DI fittings such as bend, tee, elbow, reducer etc, jointing existing branch connections, making rubber gasket joints (Tyton joint) and testing on completion complete all as specified and directed for the following sizes:-

(a) 100mm bore

(b) 150mm bore

M & L for construction of brick masonry valve pit with sub-class 'B' brick built in cement mortar (1:6), of size (90 x 90 x 90) cm (internal dimension) with one brick thick walling and 150 cm x150 cm x 10 cm base foundation with PCC (1:3:6), type C2, cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, of brick work with and including MS cover of size 01mtr x 01mtr made out from 3 mm thick MS sheet iwith (40 x 40 x 5) mm angle iron framing & painting the steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary excavation and earth work and . demolition of the existing old valve and removal of old dimolished materials and surplus excavated soil to a distance n-exc 50m etc complete all as specified and as directed.

M & L for construction of brick masonry valve pit with sub-class 'B' brick built in cement mortar (1:6), of size (120x120x120) cm (internal dimension) with one brick thick walling and 150 cm x150 cm x 10 cm base foundation with PCC (1:3:6), type C2, cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, of brick work with and including MS cover of size 01.3mtr x 01.3mtr made out from 3 mm thick MS sheet with (50 x 50 x 5) mm angle iron framing & painting the steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary excavation and earth work and demolition of the existing old valve and removal of old dimolished materials and surplus excavated soil to a distance n-exc 50m etc complete all as specified and as directed.

Carryout day to day rectification of water supply complaint such as repair, reconnection and replacement of water supply system in air force station Agra area all as directed by Engr in Charge. Note:- Note: (a) 01 x Pipe fitter and 02 x helper will be detailed by the contractor for attending above complaints on daily basis. Cost of which shall be deemed to be included in quoted rates. (b) Replacement of major items shall be measured and paid under relevant items of this schedule. (c) Pipe fitter and helper so detailed by the contractor will report to MES complaint cell at 0845 hrs morning to receive complaint slip from department and complaints shall be rectified within 08 Hours. If contractor fails to detail above tradesmen a panel recovery@ Rs. 500.00 per day shall be made to contractor and shall be recovered from RAR/Final bill. (d) Repairing upto 06 Complaints at different water supply system with minor fittings/ fixtures materials costing upto Rs 500/- will be considered as one job.

Taking out U/S Centrifugal pump set of capacity 7.5 HP including motor from Pump house after disconnecting all electrical connections & supply, fixing, commissioning & testing monoblock Centrifugal pump set of 7.5 HP discharge capacity 570 LPM at 57 metre head three phase , 415 volt AC electric driven 3000 RPM including necessary wiring from motor to panel etc complete all specified and directed.Make : Kirloskar Model - KS-823+ or equivalent in Crompton/KSB/Havells

M&L in renewal for boring/drilling in any type of strata upto 100 mtr of 150 mm dia by any means including developing bore, flushing up to coming of clean water etc all as specified and directed.

Supply & lowering in renewal of PVC pipe 125 mm dia ISI marked of pressure 6 Kg/cm² Plain/slotted all as specified and directed.

M&L for pea gravel of suitable size for borewell to be filled around casing pipe of borewell complete all as specified and directed

M & L for 2 Nos MS clamp madeout of 40mmx 6 mm thick RI at iron for holding of 40 mm dia column pipe complete with suitable size 02 Nos GI nut, bolt & washers complete all as specified and directed

M& L for well cap of size 125 mm dia duly made out of by using 4 mm thick MS plate including making provision for passing GI column pipe of 40 mm dia complete all as specified and directed by Engineer-in-charge.

M/S SINGH ELECTRIC CO (BID ID -3142602)

MUKTA AND COMPANY (BID ID -3135245)