Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-Finance | L1 | Accepted-Finance L1 Bidder | |
| 2 | L2₹13.2 L+₹45,677.35 (3.57%)Accepted-Finance | L2 | Accepted-Finance L2 Bidder |
Tender Value
₹14.8 L
EMD Value
₹29,580
Closing Date
31 Oct 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER WSMP DIV SGR
OFFICE OF THE EXECUTIVE ENGINEER WSMP DIV SGR
IMPROVEMENT UP-GRADATION OF EXISTING PREMISES OF PHE AT RAJ-BAGH SRINAGAR. (UNDER UT CAPEX)
2023_PHE_233315_1
E-NIT No.28/WSMP of 10-2023, Date-12/10/2023
Open Tender
Civil Works
Item Rate
30 days
RAJ BAGH SRINAGAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
EXECUTIVE ENGINEER WSMP DIV SGR
₹29,580
Yes
4 Nov 2023
12 Oct 2023
1 Nov 2023
12 Oct 2023
31 Oct 2023
12 Oct 2023
Amount
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
Finishing walls with water proofing cement paint of required shade: i. Old work (one or more coats applied @ 2.20 kg/10sqm) complete
Applying priming coat: i. With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
French spirit polishing, one or more coats on old work.
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete i. On steel work
Providing and fixing of wall paper of reputed make ISI mark including all sorts of carriage and labour charges required for the job as per site requirement complete job as per the directions of Engineer –in-charge.
Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.
Cleaning of Septic tank including disposal from direction office Rajbagh to dumping site lead avg. lead 6Kms as per direction of Engineer-in-charge complete job.
Providing and fitting of (brass) 40 mm size Cupboard lock 6 levers (of approved quality)
Repairs to cupboard by way of replacement of shelves by 12mm thick water proof particle board, taking out existing wooden shutter, repairs by cutting, painting etc. and re-fixing of repaired shutters to existing frames, including replacement of hinges with screws etc. as required, all complete as per the direction of the Engineer-in-charge.
Providing and fixing 15 cm high drawer of the cupboard with 12 mm thick base and side planks with wooden handles and 20x25 mm runner fixed with screws complete including painting and polishing. Note: Overall plan area of the drawer shall be measured. i. Second class Kail Wood
Providing and fixing of electrical points (heating and lighting) including cost of wire (4/1.5m), switches, necessary MCB’s switch board, ceiling roses, 3&2 pin sockets (16A/6A) of reputed make ISI mark, casing / conduit material of all sorts of carriage and labour charges required for the job. i. Lighting Points
ii. Heating Points
General servicing / overhauling of AC’s having capacity 1.5/2.0 Ton including filling of gas and repairs to voltage stabilizer complete job as per the direction of Engineer-in-charge.
General servicing / overhauling of wall mounted heating blowers including repairs to heating coils, fan, switches etc. as per the directions of Engineer-in-charge. Complete Job.
Providing and placement of steel (Dunlop) chairs of standard quality ofreputed make. The job inlcuides all taxes, levies etc. complete job as per the direction of the Engineer-in-charge.
Manufacturing, Providing, Fixing, Installation of any number of retro-reflective signage system /boards as directed by Engineer-in-charge of 2mm thick aluminium alloy highly stressed sheeting plates of different size and specifications having properties of anti-corrosion, weather resistant, colour stability, extreme durability and extreme visibility in all weather conditions in accordance with the international brand complete with computer aided machine process subject matters, logos symbols, borders arrow text size in English / Urdu as directed by Engineer-in-charge and graphics by way of cut out, printing application in green and white colour which includes providing of fancy type metal stanchion upto 300cm length of40mm OD with 90mm decorative dome shaped top including supporting stiffeners for strengthening of the job wherever necessary with providing of 15cm long resting toe plates fitted at bottom for embedding which also includes suitable technical provisions by way of accurate pre-drilled holes to enable anti-theftrivetting system and other necessary allied hardware required for the job and priming / cladding, painting of ISC which also includes installation, erection, hoisting and fixing in position including embedding of signage / metal stanchion at various locations or site including packing / carriages, handling / rehandling / loading /unloading / leads/ lifts and head load necessary with tools / plants and all consumable electric energy gases etc. as and when required for scaffolding as per requirement of site (retro-reflective signages of super-engineering grade with fancy type metal stanchion in structural steel frame and all installation charges, complete in all respects.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: i. Flexible pipe (40 mm dia).
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. i. Rectangular shape 453x357 mm
Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: i. 10 liter capacity -White
Providing and fixing uplasticized PVC connection pipe with brass unions i. 45 cm length (15 mm nominal bore).
Providing and fixing of (brass) spindles for mixers, angle valves of wash basin, geysers and low level flushing cisterns will all fittings and fixtures complete as per the directions of Engineer-in-charge.
Providing and fixing of complete electric kit for gyser with all fittings and fixtures complete.
Repairs to central conference table by way of taking out existing wooden supports repairs by cutting, painting etc. and refixing of repaired supports to existing frame work, including replacement of hinges with screws etc. as required all complete as per the directions of Engineer-in-Charge.
Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete.
Providing and fixing AN59SL Slimline 2.5mm Aluminium Stair Nosing supplied pre-drilled and countersunk in the channel for concealed fixing and on-site retro fitting of the infill, or through the infill with smooth pips supplied to cover the screw heads.
Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately). i. Flat pressed 3 layer particle board or graded wood particle board grade-I type-II conforming to IS” 3087 edges to be painted with polyurethane primer.
Providing and fixing 25 mm thick shutters for cupboard etc, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: i. Panelled or paneled and glazed shutters: a. Second class kail wood.
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (35mm thick) i. Second class Kail wood
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : (35mm thick) i. Second class Kail wood
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. i. Second Class kail wood
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) i. For fixed portion a. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) i. With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
Providing and fixing of thermocoal foam 10mm thick for matting of approved make as per the directions of Engineer-in-Charge.
Providing and fixing of wall to wall carpet 20mm thick for matting of approved make as per the directions of Engineer-in-Charge.
Providing and fixing of (Brass) curtain rod 20 mm dia 1.25 mm thick.
Providing and fixing of (Brass) brackets (curtain rods) 20 mm
Providing and fixing of curtains of cotton make (size 4’-0” x 6’-0”) including rings of approved brand as per the directions of Engineer-in-Charge.
Providing and placement of (size 4’-0” x 6’-0”) black striped single bed cotton mattress of approved make as per the directions of Engineer-in-Charge.
Supply of blanket mink thickness not less than 15mm of approved make as per directions of Engineer-in-Charge.
Supply of cotton pillow (size 16”x24”) with cover of approved make as per directions of Engineer-in-Charge.
Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : i. Of sectional area 40 sqcm. and above.
Repairs to plastic paneling by way of replacing of damaged existing by new of approved make as per directions of Engineer-in-Charge.
Providing and fixing of extension chords of reputed make complete having 3No. pin, 16A/2-pin, 6A Sockets in combination with 6A on / off switch 4mm wire for a length of 5m as per directions of Engineer-in-Charge.
Providing and fixing of C.P Soap Case of approved make with latest IS Specifications.
Supply of LED lamp 15W of approved make as per directions of Engineer-in-Charge.
Providing and fixig of KENT Supreme Plus RO Water Purifier of reputed make / RO+UV+UF+TDS Control+UV in Tank / Wall Mountable / Zero Water Wastage / Patented Mineral RO Tech / 8L Storage / 20L/hr Output / white reputed make including all carriages upto site of work complete job as per the directions of Engineer-in-Charge.
Providing and placement of 183L 3 Star Digital Inverter Direct Cool Single Door Refrigerator (RR20C1723S8/HL, Siliver, 2023 Model) of reputed make including all carriages upto site of work complete job as per the directions of Engineer-in-Charge.
Providing and placement of executive office table (size 6’-0” x 4’-0”) of reputed make with 3 No. drawers on each side left / right including all carriages upto site of work complete job as per the directions of Engineer-in-Charge.
Providing and placement of executive office chairs of reputed make including all carriages upto site of work complete job as per the directions of Engineer-in-Charge.
Providing and placement of wooden file locker (size 4’-0” x 1’-6” x 6’-0”) for office of reputed make including all carriage upto site of work complete job as per the directions of Engineer-in-Charge.
Manufacturing, Providing, fixing, Installation of any number of acrylic2D honour board having alphabetical sign content of 5mm thick of different sizes and specifications complete with computer order machine process subject matter, logos, symbols, boarders, text size etc. in Engligh as directed by Engineer-in-Charge decorative dome shaped top including supporting stiffeners whenever necessary including all types of carriage upto site of work complete job.
MUNIR AHMAD DAR
tech_eval.pdf
fin_eval.pdf
finance_681648.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .