Construction of Two rooms in the Vellaiyammalpuram Community Hall, Odaipatti Town Panchayat

Amount

Earthwork excavation and depositing on bank with an initial lift of 2M in light black cotton soil. Hard stiff day. Stiff black cotton. Hard red earth, shales, muram, gravel stoney earth etc. as per SS 20B ( TNBP SS No.23 & 24)

Cement concrete 1:4:8 mix (one cement four sand Eight hard bracken stone) using 40mm ISS gauge hand bracken granite stone jelly for foundation including watering wherever necessary and laid in layer not ore than 15mm thick Compacting etc. complete complying with standard Specification and as directed.

Supplying and erecting for sides and soffits including supports and strutting up to 3.29m height for plan surface in all floors with all cross bracing using mild steel sheets of size 90cm and 10 gauge stiffened. Welded with mild steel angels of size 25mm x25mm x3mm for boarding laid over silver oak (country wood) joist of size 10cm centre and supported by casuarinas props of 10cm to 13 cm Dias paced at 74cm center to center etc. complete complying with standard Specification and as directed for the following items.

Centering charges of RCC Works for slab and beams including cost and conveyance and all labour charges etc., complete as per standard specifications. Coloum

Supplying and Fabrication and placing in position mild steel or ribbed or steel for all reinforced cement concrete works as per the design given including cost of Steel and binding wire in all floors etc. complete complying with standard Specification (Ms RTS bars will be supplied departmentally at section stores and cost will be recovered at issue rate) the binding wire shall be supplied by the contractor.

Rcc 1:1 1/2:3 mix using 20mm metal (ISS HBG metal) including cost and conveyance of all materials to site and all labour charges etc.

Brick work in Cement mortar 1:5 mix using country bricks of size 8.3/4" X 41/4" X 2" including all cost and conveyance of all Materials to site and all labour charges etc complete.

celling plastering in cm 1:3 10mm thick including cost and conveyance of all materials to site and all other labour charges including curing etc. as per standard specification.

Plastering with Cement Mortar 1;5 mix to 12mm thick in all floors including curing etc. complete complying with standard Specification and as directed.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving requi

Emulsion Painting two coats with approved colour including cost and conveyance of all materials to site and all labour charges etc, complete

Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil)

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unshealhed SC.Cu. conductor of 1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point (For Electronic regulator) (5 points per coil). SD 22

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point

Supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps

Supply and fixing of fitting with guard suitable for 20W LED lamp

M SEKARAN (BID ID -1359240)